• Advances in nano research
• /
• v.14 no.6
• /
• pp.557-573
• /
• 2023

The rapid growth of zinc-oxide (ZnO) nanostructures (NSs) on woven carbon fiber (WCF) is reported in this study employing a microwave-aided chemical bath deposition process. The effects of different process parameters such as molar concentration, microwave duration and microwave power on morphologies and growth rate of the ZnO on WCF were studied. Furthermore, an attempt has been taken to study influence of different type of growth solutions on ZnO morphologies and growth rates. The surface functionalization of WCF fabrics is achieved by successful growth of crystalline ZnO on fiber surface in a very short duration through one-step microwave synthesis. The morphological, structural and compositional studies of ZnO-modified WCF are evaluated using field-emission scanning electron microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy respectively. Good amount of zinc and oxygen has been seen in the surface of WCF. The presence of the wurtzite phase of ZnO having crystallite size 30-40 nm calculated using the Debye Scherrer method enhances the surface characteristics of WCF fabrics. The UV-VIS spectroscopy is used to investigate optical properties of ZnO-modified WCF samples by absorbance, transmittance and reflectance spectra. The variation of different parameters such as dielectric constants, optical conductivity, refractive index and extinction coefficient are examined that revealed the enhancement of optical characteristics of carbon fiber for wide applications in optoelectronic devices, carbon fiber composites and photonics.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.293-299
• /
• 2004

Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.

• Journal of Plant Biotechnology
• /
• v.3 no.1
• /
• pp.33-38
• /
• 2001

Protoplasts isolated from inbred lines of Brassica oleracea L. var capitata (cabbage) and Brassica campestris L. ssp. pekinensis (Chinese cabbage) were fused by PEG-mediated method, and somatic hybrid cells were differentiated into plants. for the identification of somatic hybrid plants, ploidy level, plant morphology, and cytological analysis were performed. All of the regenerated plants derived from fused protoplasts were shown to be 2X-4X, or higher ploidy level, presumably due to somatic hybridization or chromosome doubling. The morphology of leaves, petioles, and flowers showed an intermediate phenotype between Chinese cabbage and cabbage. Chromosome numbers in these somatic hybrids ranged mostly from 33 to 38. According to Genomic in situ hybridization (GISH) pattern, signals from both fusion parents of B.campestris or B.oleracea were detected in different colors when chromosomes of putative somatic hybrids were observed.

• Honam Mathematical Journal
• /
• v.39 no.4
• /
• pp.637-647
• /
• 2017

Elastica is known as classical curve that is a solution of variational problem, which minimize a thin inextensible wire's bending energy. Studies on elastica has been conducted in Euclidean space firstly, then it has been extended to Riemannian manifold by giving different characterizations. In this paper, we focus on energy of the elastic curve in a Lie group. We attepmt to compute its energy by using geometric description of the curvature and the torsion of the trajectory of the elastic curve of the trajectory of the moving particle in the Lie group. Finally, we also investigate the relation between energy of the elastic curve and energy of the same curve in Frenet vector fields in the Lie group.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.407-411
• /
• 2000

Color reproduction n CRT monitors needs colorimetric characterization concluding two stages with 3x3 matrix and three TRCs (Tone-Reproduction Characteristics). The 3x3 matrix is based on the additivity of RGB emissions, and the TRC represents the non-linearity between the input digital counts and the output luminance. The objective of this project is to evaluate the accuracy of color reproduction on LCD monitors using conventional CRT model(GOG model). For two different manufacturers, colorimetric characterizations of desktop LCDs have been performed. Because the transfer function for LCD is very differ from TRC of CRT, some researchers had reported that GOG model is inadequate for the colorimetric characterization of LCDs. However in our experiment, the degree of accuracy was dependent on the shape of electro-optical transfer functions of LCD. It has been founded that the GOG model could be applied for LCD monitors having monotonically increased Electro-optical transfer function.

• Journal of Powder Materials
• /
• v.9 no.5
• /
• pp.322-328
• /
• 2002

Fe-Co nanocomposite powders with different composition were prepared by chemical vapor condensation (CVC) process and their characterizations were studied by means of X-ray diffraction, transmission electron microscopy, and vibrating sample magnetometer. The particles having the mean size of 5~25 nm consisted of metallic cores and oxide shells. The Co contents and particle size increased with increasing the carrier gas flow rate of Co precursor. The saturation magnetization and coercivity increased with increasing Co content. and the saturation magnetization maximized at the 40 wt.%Co. The Fe-Co nanocomposite powder oxidized at $400^{\circ}C$ showed the maximum coercivity of 1739 Oe.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.286-286
• /
• 2006

We report on a fascinating morphology; giant spherical conducting polythiophene by the in-situ gamma radiation-induced chemical polymerization method. The resultant micron-size buckyball-shaped polymer structures were identified by high resolution transmission electron microscopy and scanning electron microscopy. Different characterizations e.g. Fourier transform infrared, x-ray diffraction, and x-ray photoelectron microscopy were utilized to prove that the new morphological conducting polythiophene was synthesized successfully by this novel method.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.120-122
• /
• 2006

This study deals with characterizations of microstructure and wear performance of a cladding layer, product on 1.9 mm-thick mild steel plate by the electric resistance welding, of composite metal powder of Coarse WC-6.5%Co and high carbon alloy(SHA). The cladding layer was examined and tested fur microstructural features, chemical composition, hardness, wear performance and wear mechanism. The cladding layer have two different matrix were observed by an optical microscope and EPMA. The one was the coarse WC-6.5Co structure. The other was the melted SHA with surrounding the WC-6.5Co structure. The hardness of WC-6.5Co was 1210HV. The hardness of SHA was 640HV. In comparison by wear rate, the cladding layer showed the remarkable wear performance that was 15 times of SM490 and about 62% of D2.

• Journal of the Korean Ceramic Society
• /
• v.30 no.6
• /
• pp.457-468
• /
• 1993

In oxide matrix-SiC(W) composites, instability and glassy phase formation due to oxidation at the high temperature and the diffusion of Si, respectively, cause brittle fracture and low reliability for ceramic materials. The mode of contribution in each mechanisms induced by matrix-whisker debonding, varies with the morphology of matrix-whisker interfaces. This work has described the dispersion behaviours and stabilization mechanisms in slip systems, and multiple toughening mechanisms by dint of two second phase different from each other when spherical ZrO2 and chemically stable Al2O3(W) is respectively added in Al2O3 matrix. To obtain complexshaped components, slip casted bodies were sintered at 1$600^{\circ}C$, 2hrs up to 98~99% R.D.. Multiple toughening mechanisms in comparison with theories reported until now will be discussed as a result of the phase analysis of ZrO2 by athermal behaviours and microstructural characterizations as well as measured mechanical properties.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.589-593
• /
• 2008

The hydroxyapatite with different amounts of strontium was synthesized with wet chemical technique. The structural, morphological and chemical characterizations for the prepared hydroxyapatite with various strontium amounts were carried out with XRD, SEM, EDS, and FT-IR. Strontium is quantitatively incorporated into hydroxyapatite where its substitution for calcium provokes a well distribution in the EDS mapping and a linear shift of the infrared absorption bands of the hydroxyl and phosphate groups, coherent with the greater ionic radius of strontium.