• Title/Summary/Keyword: difference of bedrocks

Search Result 8, Processing Time 0.021 seconds

Mechanism of the Marine Terraces Formation on the Southeastern Coast in Korea (한국 남동해안 해안단구의 지형형성 mechanism)

  • 윤순옥;황상일
    • Journal of the Korean Geographical Society
    • /
    • v.35 no.1
    • /
    • pp.17-38
    • /
    • 2000
  • The marine terraces often offer come important clues to understand the topographic development during the Quaternary and the present landforms in korea. We examined the mechanism of the marine terraces formation along the coast from Samjung-Ri(community), Guryongpo-Eup(county) to Haseo-Ri, Yangnam-Myun(county), Gyungju-Si(city). Among the various but unique factors of the given coastal environment, which should contribute to the marine terraces formation together, we focused on five possible factors for the present stydy. Geologic difference in bedrocks, protrusion degree of coastiline, topological relief of sea-bottom, fluvial characteristics on land, and pattern of the waves appeared to act cooperatibely on the terrace formation of Southeastem coast in korea, while the fluvial characteristics seemed play a significant but localized role in it. Wide distribution of middle surfaces on the coast of Samjungri-Janggilri could be due to the concentration of the high waves and the weakness of the Tertiary volcanic rocks. For the sporadic distribution of the terraces on the coast of Gupungri-Gyewonri, it seemed attributable to the erosion -susceptible weak bedrock, the coastline of inner bay, shallow sea-bottom with the gentle relief, and other fluvial characteristics with the low divides. Together with the geologic difference in bedrock, other factors including protrusion degree of coast, topological relief of sea-bottom, and the transportation loads by the stream Daejongchon are believed to act cooperatively on the mechanism of the marine terraces formation on the coast of Duwonri-Upchonri.

  • PDF

Groundwater Conditions reiated with the Geologic Structures of Bedrocks in the Gyuk-Po Area. (격포 기반암의 지질구조와 지하수 상태)

  • 박동극
    • The Journal of Engineering Geology
    • /
    • v.3 no.2
    • /
    • pp.115-124
    • /
    • 1993
  • Hydrogeological survey related to groundwater condifiors was performed at the study area in Gyukpo, BuanGun, ChunlabukDo to express the relationships between groundwater conditions and the geologic structures such as joints, faults and beddings in bedrock About 200 joints and sjgnfficant faults were measured in this area. Typically, The fracture analysis on cores of 7 boreholes was tried to quantify fracture numerically. Groundwater level was periodically measured for three months. The packer tests of about 175 were carried out in 7 boreholes. As the result, Fractures are locaHy developed as ground water bearing zone and an average hydraulic conductivity of bedrock is $1{\times}10^{-5}cm/sec$ in this area the hydraulic conductivity of this area is correlated with fracture frequency value of F15 and is also well correlated with fracture developed and depth. In accordance with depth, fracture frequency and hydraulic conductivity are decreased. Hydraulic conductivity of granite along depth shows an obiouse change in values but that of sedimentary rocks do not shows changeless. Groundwater movement in the bedrocks of the study area affected not by joints but faults developed in the different rock boundary. In the northern part of this area, The differences of hydraulic conductivity between granite and sedimentary rocks give rise abrsspt at difference in groundwater leveL In the southern part of the study area, there is no different in groundwater level of both same rock types.

  • PDF

Taebaek Mountainous Region as a Natural Unit (자연 지역으로서의 태백 산지)

  • Kee, Keun-Doh
    • Journal of the Korean association of regional geographers
    • /
    • v.8 no.4
    • /
    • pp.468-479
    • /
    • 2002
  • This study attempts to characterize Taebaek mountainous region as a natural unit, relating to morphoclimatic milieu and landform development patterns of the mountains of each lithologic type. In the case of granitic mountains of Nothern parts of this region, the slopes presents more or less steep or irregular profile because of abundant microforms of exposed bedrocks and blocks. The development of such landscape is essentially due to differential weathering, associated with difference of joint density. In the case of gneissic mountains, the slopes are well regularized straight steep ones, due not only to generalized superficial weathering but also to massmovement of weathered materials. In the Middle parts of this region, especially in Taegwallyong area, with frequent alternations both of freezing-thawing and of snow accumulation-melting, the roles played by cryo-nival processes proved to be important in weathering of granite as well as in morpho-pedogenesis. In this area, weathered mantle, developed by cryogenic activity under humid condition of nival environment, covered almost all over the slopes. Although Southern parts of this region consist of limestone, on the mountainous volume, distribution of Karst forms are limited while predominate none karst forms such as cockpit type peaks, V-shaped type valleys dissecting steep slopes covered with thin deposits in thickness containing rock debris.

  • PDF

Properties of Channel and Evolutions of Fluvial Terraces in Odae River (오대천의 특성과 하안단구의 형성과정)

  • Lee, Gwang-Ryul
    • Journal of the Korean Geographical Society
    • /
    • v.44 no.3
    • /
    • pp.224-239
    • /
    • 2009
  • This study analyzes the properties of fluvial landforms in the upper and lower reaches and investigates the evolutions of stream and fluvial terrace in the Odae river basin. The lower basin of the river that consist of sedimentary rocks resistant to weathering and erosion processes shows higher altitude, relief and slope than the upper basin that consist of granite less resistant to weathering and erosion processes. The average width of river valley at the lower reaches is one-third to the upper reaches and the average width of river channel at the lower reaches is narrower than at the upper reaches. Based on the OSL age dating, the fluvial terrace T1 formed at the temperature-rising period during the late MIS 2 and T2 formed at the middle MIS 3, interstadial period during the last glacial period. Based on the these results, the average incision rates of Odae river are calculated as 0.205m/ka and 0.269m/ka at the upper granite area and lower sedimentary rocks area, respectively.

A Comparative Analysis on Channel Forms and Landscapes at Naeseongcheon River and Wicheon River in Gyeongpook Province (경북 내성천과 위천의 하도 형상 및 경관 비교 분석)

  • Lee, Gwang-Ryul
    • Journal of The Geomorphological Association of Korea
    • /
    • v.17 no.4
    • /
    • pp.1-16
    • /
    • 2010
  • Channel topography, sediment properties, channel landscapes and characteristics of land covers in Naeseongcheon and Wicheon River consisting of granites and sedimentary rocks, respectively, are compared and analyzed. Due to the differences of bedrocks, soils and characteristics of land covers in the basins, Wicheon River with the slow flow speed shows the larger variations in river stage than Naeseongcheon River. While Naeseongcheon River fed by the granite sediments throughout granular disintegration hs tthe regular grain size properties with coarse sand in the most of river, Wicheon River fed by sedimentary rocks indicates the dramatic decertses of grain size lower-ward. Naeseongcheon River with channel interferences such as sand-sized sediment transughoations, dredges, and aggregate collections is analyzed as poorer vegetation covers than Wicheon River due to the dramatic changes in channel surfaces.

Properties and Provenance of Loess-paleosol Sequence at the Daebo Granite Area of Buan, Jeonbuk Province, South Korea (전북 부안 화강암지역 뢰스-고토양 연속층의 퇴적물 특성과 기원지)

  • Park, Chung-Sun;Hwang, Sang-Ill;Yoon, Soon-Ock
    • Journal of the Korean Geographical Society
    • /
    • v.42 no.6
    • /
    • pp.898-913
    • /
    • 2007
  • We examined soil properties and provenance of loess-paleosol sequences at the Daebo Granite area of Buan, Jeonbuk Province, South Korea. The section consists of the surface layer, Layer 1(paleosol), Layer 2(loess), Layer 3(paleosol), Layer 4(loess), and Layer 5(paleosol), from top to bottom and thickness of the exposed section is approximately 280cm. The magnetic susceptibility values show the distinct variations between the loess- and the paleosol layer. Even though pH, ORP, water content, and soil hardness do not display the obvious differences in the section, the organic content indicates the variation similar to those of the magnetic susceptibility. In the respect of the soil colors measured under 3 conditions, although the variations of the wet soil color exceedingly reflect the difference of the layers, these variations are obscure in some points in the section due to the characteristics of the Munsell color system. Based on the geomorphological properties, sedimentary structure, the difference of the major element composition and the condrite-normalized rare earth element(REE) patterns showing the clear difference from the adjacent bedrocks and stream sediments and the similarity to those of the Chinese Loess Plateau, it is suggested that the section was formed by the material originated from the Chinese Loess Plateau and peripheral areas. However, because the material experienced the alteration after sedimentation under the environment of the sediment area, it has the properties different from the material in the provenance areas. This phenomenon may result in the climatic condition of Korea, especially in precipitation.

A Theoretical Study on the Landscape Development by Different Erosion Resistance Using a 2d Numerical Landscape Evolution Model (침식저항도 차이에 따른 지형발달 및 지형인자에 대한 연구 - 2차원 수치지형발달모형을 이용하여 -)

  • Kim, Dong-Eun
    • Economic and Environmental Geology
    • /
    • v.55 no.5
    • /
    • pp.541-550
    • /
    • 2022
  • A pre-existing landform is created by weathering and erosion along the bedrock fault and the weak zone. A neotectonic landform is formed by neotectonic movements such as earthquakes, volcanoes, and Quaternary faults. It is difficult to clearly distinguish the landform in the actual field because the influence of the tectonic activity in the Korean Peninsula is relatively small, and the magnitude of surface processes (e.g., erosion and weathering) is intense. Thus, to better understand the impact of tectonic activity and distinguish between pre-existing landforms and neotectonic landforms, it is necessary to understand the development process of pre-existing landforms depending on the bedrock characteristics. This study used a two-dimensional numerical landscape evolution model (LEM) to study the spatio-temporal development of landscape according to the different erodibility under the same factors of climate and the uplift rate. We used hill-slope indices (i.e., relief, mean elevation, and slope) and channels (i.e., longitudinal profile, normalized channel steepness index, and stream order) to distinguish the difference according to different bedrocks. As a result of the analysis, the terrain with high erosion potential shows low mean elevation, gentle slope, low stream order, and channel steepness index. However, the value of the landscape with low erosion potential differs from that with high erodibility. In addition, a knickpoint came out at the boundary of the bedrock. When researching the actual topography, the location around the border of difference in bedrock has only been considered a pre-existing factor. This study suggested that differences in bedrock and various topographic indices should be comprehensively considered to classify pre-existing and active tectonic topography.

The Study on the Debris Slope Landform in the Southern Taebaek Mountains (태백산맥 남부산지의 암설사면지형)

  • Jeon, Young-Gweon
    • Journal of the Korean Geographical Society
    • /
    • v.28 no.2
    • /
    • pp.77-98
    • /
    • 1993
  • The intent of this study is to analyze the characteristics of distribution, patter, and deposits of the exposed debris slope landform by aerial photography interpretation, measure-ment on the topographical maps and field surveys in the southern part Taebaek mountains. It also aims to research the arrangement types of mountain slope and the landform development of debris slopes in this area. In conclusion, main observations can be summed up as follows. 1. The distribution characteristics 1)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of intrusive rocks with the talus line. 2)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of inrtusive rocks with the talus line. 2) From the viewpoint of distribution altitude, talus is mainly distributed in the 301~500 meters part above the sea level, while the block stream is distributed in the 101~300 meters part. 3) From the viewpoint of slope oriention, the distribution density of talus on the slope facing the south(S, SE, SW) is a little higher than that of talus on the slope facing the north(N, NE, NW). 2. The Pattern Characteristics 1) The tongue-shaped type among the four types is the most in number. 2) The average length of talus slope is 99 meters, especially that of talus composed of hornfels or granodiorite is longer. Foth the former is easy to make free face; the latter is easdy to produce round stones. The average length of block stream slope is 145 meters, the longest of all is one km(granodiorite). 3) The gradient of talus slope is 20~45${^\circ}$, most of them 26-30${^\croc}$; but talus composed of intrusive rocks is gentle. 4) The slope pattern of talus shows concave slope, which means readjustment of constituent debris. Some of the block stream slope patterns show concave slope at the upper slope and the lower slope, but convex slope at the middle slope; others have uneven slope. 3. The deposit characteristics 1) The average length of constituent debris is 48~172 centimeters in diameter, the sorting of debris is not bad without matrix. That of block stream is longer than that of talus; this difference of debris average diameter is funda-mentally caused by joint space of bedrocks. 2) The shape of constituent debris in talus is mainly angular, but that of the debris composed of intrusive rocks is sub-angular. The shape of constituent debris in block stream is mainly sub-roundl. 3) IN case dof talus, debris diameter is generally increasing with downward slope, but some of them are disordered and the debris diameter of the sides are larger than that of the middle part on a landform surface. In block stream, debris diameter variation is perpendicularly disordered, and the debris diameter of the middle part is generally larger than that of the sides on a landform surface. 4)The long axis orientation of debris is a not bad at the lower part of the slope in talus (only 2 of 6 talus). In block stream(2 of 3), one is good in sorting; another is not bad. The researcher thinks that the latter was caused by the collapse of constituent debris. 5) Most debris were weathered and some are secondly weathered in situ, but talus composed of fresh debris is developing. 4. The landform development of debris slopes and the arrangement types of the mountain slope 1) The formation and development period of talus is divided into two periods. The first period is formation period of talus9the last glacial period), the second period is adjustment period(postglacial age). And that of block stream is divided into three periods: the first period is production period of blocks(tertiary, interglacial period), the second formation period of block stream(the last glacial period), and the third adjustment period of block stream(postglacialage). 2) The arrangement types of mountain slope are divided into six types in this research area, which are as follows. Type I; high level convex slope-free face-talus-block stream-alluvial surface Type II: high level convex slope-free face-talus-alluvial surface Type III: free face-talus-block stream-all-uvial surface Type IV: free face-talus-alluval surface Type V: talus-alluval surface Type VI: block stream-alluvial surface Particularly, type IV id\s basic type of all; others are modified ones.

  • PDF