• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.72-74
• /
• 2014

Multilayer ceramic capacitor (MLCC) makes acoustic noise of electronic devices. Conversed piezoelectric effect of dielectric substance consists of $BaTiO_3$ causes vibration of MLCC so it must be analyzed to reduce the noise. Thus, finite element model for piezoelectric analysis of MLCC was constructed in this paper. Piezoelectric characteristics of MLCC was considered for the accurate simulation result. Displacement response for sinusoidal voltage signal was measured and simulation result was verified with test result.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.219-224
• /
• 2005

In this paper, a contact-type linear encoder-like capacitive displacement sensor (CLECDS) is proposed. It is based on the linear encoder capacitive displacement sensor that consists of two substrates with a series of conducting grating in identical size and it is used as a contact sensor of which the two substrates assembled faced to each other after coated with thin dielectric film. It was confirmed that the prototype of this sensor has resolution of about 126nm and measuring range of 20 mm in the test.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.155-160
• /
• 2009

The reliability could be one of the essential properties for multilayer ceramic capacitor (MLCC) using in various electronic devices and the concentration and mobility of oxygen vacancy would play important role in the reliability. To investigate the migration behavior of oxygen vacancies, thermally stimulated depolarization current (TSDC) is adopted. In dielectric material of X5R MLCC, the TSD-Current peak observed around 150$^{\circ}C$ and 200$^{\circ}C$ which represented the migration of oxygen vacancy. Substituting Yttrium for Dysprosium in X5R MLCC showed higher migration activation energy and lower TSD current density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.329-333
• /
• 1996

In this Paper, the streaming electrification of transformer oils generated at the interface of transformer oils and the AC breakdown with impurity is studied. The electrification current is measured by the electrometer connected the faraday cage. And a oil velocity is maintained equally. In case of the AC breakdown test, the temperature are 30[$^{\circ}C$], 50[$^{\circ}C$], 80[$^{\circ}C$] and 90[$^{\circ}C$], repetitively. As a result of breakdown experiment, the dielectric breakdown strength is decreased in low temperature region and is increased in high temperature region according to increase of contained sodium. In case of streaming electrification experiment, the streaming current is more increased with the specimen contained sodium than the original specimen.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2364-2367
• /
• 1999

Polymer insulating materials are widely used in power distribution and transmission systems for their good dielectric properties, light weight, low cost, and good contamination performance. Tracking is one of the biggest problems to be overcome in polymer insulating materials. The alumina trihydrate(ATH) is widely used as a filler for improve the tracking performance of silicone rubber. In this paper, we have investigated the influence of surface treatment of fillers on the tracking performance of silicone insulator using the IEC 587 tracking test method.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1323-1326
• /
• 1994

the application of epoxy composite materials for outdoor insulating systems has some significant advantages compared with conventional inorganic materials, that is low weight in combination with high mechanical strength, small dimensions and design versatility. The experimental results for the basis composition and interlace characteristics of the matrix resin/inorganic fillers($SiO_2$) which are the composite materials have been studied. The electrical characteristics(electrical breakdown, dielectric, insulating resistivity, tracking) and mechanical characteristics( tensile strength, elongation, flexible strength) in the epoxy composite materials have been studied. The life of the epoxy composite material was evaluated by accelerated Weather-Ometer test and the degradation process due to outdoor exposure condition is discussed with respect to the mechanical and electrical properties.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.165-166
• /
• 2006

By using a ceramic material with dielectric constant 37, the miniature waveguide ceramic bandpass filter was implemented. The proposed waveguide ceramic bandpass filte was based on the mode matching method and simulation process. For overcoming high power, We used the connector at in/output of waveguide ceramic bandpass filte. The result of power test satisfied the 30W. The product will used as a parts of repeater for wibroband.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.215-224
• /
• 2008

The present study aims to design a multilayer microstrip antenna with composite sandwich construction and investigate fatigue behavior of this multilayer SAS (surface antenna structure) that was asymmetric sandwich structure for the next generation of structural surface technology. This term, SAS, indicates that the structural surface becomes an antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, antenna elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.2 GHz. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of the SAS was obtained. The experimental results of bending fatigue were compared with single load level fatigue life prediction equations and in good agreement. The SAS concept is can be extended to give a useful guide for manufacturers of structural body panels as well as antenna designers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.127-130
• /
• 2007

A new front plate structure of ac-PDP was explored using fence-type aluminum electrode coated with anodic aluminum oxide.[1] In this structure, ITO and glass dielectric layer were eliminated and expensive Ag BUS electrode was replaced with aluminum. Test panels were prepared using the new structure and their luminance and discharge characteristics were examined. These results indicate that the new structure provide a new way of cost reduction and enhancement of performance of ac-PDPs

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.4
• /
• pp.164-168
• /
• 2002

The main hazard leading to breakdown in GIS(Gas Insulated Switchgear) comes from free conducting particles, which can cross between tee electrodes and cause dielectric failure under the influence of the electric field. Bouncing height of the particle can be an important factor to evaluate the possibility of breakdown occurrence. In this paper, how to estimate, outside a GIS, the bouncing height of the particle was newly suggested when GIS is in service. Both experimental results using 362 kV test chamber and computer simulation results on estimating the height were presented and compared with each other.