• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 춘계학술발표회논문집
• /
• pp.25-28
• /
• 1984

This paper describes the design of band-pass filter using the dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter as band-pass filter. Because dielectric resonator band~pass filter has a very high-Q, the bandwidth of this filter is very narrow. as a result of experiment, the dielectric resonator bandwidth of this filter is very narrow. As a result of experiment, the dielectric resonator band-pase filter has various modes central frequencies due to the mode change and good characteristric as a band-pass filter.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.933-941
• /
• 1996

In this study, the Tx(Transmitting) and Rx(Receiving) band pass filter for personal communication services was constructed and designed using .lambda./4 TEM mode dielectric resonators. Band pass filter was composed of ceramics resonators which has been developed using ($Zr_{0.65}$,$Sn_{0.35}$) $Ti_{1.04}$ $O_{4.04}$ ceramic and Unloaded-Q ( $Q_{o}$) of .lambda./4 TEM mode dielectric resonator with inner hole size 0.9mm and external size 3mm using silver electrode is 354.5 at 1.95GHz. For the band pass filter design and construction, the design theory and simulation results of band pass filter using J-inverter theory have been studied. The parameters which are evaluated by design theory are practically applied to the filter construction and the simulation results are in agreement with the measured results after fine tunnings.s.s.s.s.s.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.49-56
• /
• 1992

In this paper a band-pass filter using dielectric resonators with tuning screw and spacer at Ku-band is designed and constructed. For the filter design and construction, the coupling coefficient K between two resonators is numberically evaluated. The external quality factor Q$_{ex}$ is also calculated with a microstrip line which is necessary for the field excitation of dielectric resonator. The coupling between dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter in band-pass filter. The Q$_{ex}$ and K data which are evaluated by numberical analysis are practically applied to the filter construction. The theoretical Band-pass filter responses are given by Chebyshev approximation and they are nearly similar to the experimental results.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.268-271
• /
• 2004

An analytic design formula is proposed for a TEM mode dielectric bandpass filter with attenuation poles at desired frequencies in the stop band. In order to sustain the constant ripple in the passband due to attenuation poles, the initial resonant frequencies of the various resonators adopted in a filter with attenuation poles are newly calculated. The proposed design theory is verified by designing various bandpass filters with attenuation poles in the stop band.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.975-983
• /
• 1998

A duplexer filter operating at 1.9 GHz band for personal communication system is designed and fabricated using $lambada$/4 TEM mode dielectric resonator. The transmitting band pass filter is designed in the type of the elliptic function band rejection filter by 3 dielectric resonators with 5 additional capacitors and 3 inductors. The receiving band pass filter is designed by 3 dielectric resonators with 5 additional capacitors which give additional series resonance. The parameters which are evaluated by design theory are practically applied to the duplexer filter construction and the simulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1999

Recently, with the rapid development and demand for compactness of portable communications, the requirement for compact and low-cost filter is increasing. One of the methods for reducing size and cost is to use high dielectric constant and low loss dielectric material in filter. The other is new monoblock dielectric band-pass filter (BPF) which has holes in a single dielectric body without additional coupling elements. This structure effectively reduces the size and cost of the filters. For previous conventional coaxial type dielectric BPF, dielectric substrates were used for coupling between adjacent resonators and additional input and output ports were needed. Coupling between adjacent resonators of monoblock BPF can be otained via electrode pairs. Capacitances of electrode pair structure for coupling are intensively investigated by 3-D FEM. The BPF for PCS has been designed to have a 30 MHz pass-bandwidth with center frequency of 1855 MHz and an attenuation pole at below the passband using a commercial 3-D structure simulator.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.492-499
• /
• 1997

• 한국항행학회논문지
• /
• 제13권1호
• /
• pp.41-47
• /
• 2009

이 논문에서는 마이크로스트립을 이용하여 차단주파수가 10.2 GHz인 계단형 임피던스 구조의 저역 통과 여파기를 설계하고, 차단주파수 3.2 GHz인 병렬 스터브를 이용한 고역 통과 여파기를 설계하여 서로 결합하고 삽입하여 소형화하는 방식으로 UWB 대역을 포함하는 대역통과여파기를 설계, 제작하였다. 설계에 사용된 기판의 유전율은 2.2, 높이 0.508mm, loss tangent 0.0009이고, 대역통과 여파기의 넓이는 약 3 cm의 소형으로 제작되었다. 통과 대역에서의 측정 결과 -10 dB 대역폭은 7.5 GHz, -3dB 이하의 삽입손실의 특성을 보였다. 이 연구의 결과 UWB 통신 시스템과 MIC/MMIC, RFIC 시스템에 충분히 이용될 수 있을 것이다.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.665-672
• /
• 2015

We demonstrate an ultrathin metamaterial for polarization independent perfect absorption as well as a band-pass filter (BPF) which works at a higher frequency band compared to the perfect absorption band. The planar metamaterial is comprised of three layers, symmetric split ring resonators (SSRRs) at the front and structured ground plane (SGP) at the back separated by a dielectric layer. The perfect metamaterial absorber (MA) can realize near 100% absorption due to high electromagnetic losses from the electric and/or magnetic resonances within a certain frequency band. The thickness of the structure is only 1/28 of the maximum absorption wavelength.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.899-905
• /
• 2001

본 논문에서는 저손실 필터의 소형(경량화를 목적으로 간단한 구조의 3중모드 유전체 공진기를 제안하였다. 대역통과 필터(BPF)의 설계에 있어서는 유한 요소법(FEM)을 근거로 하는 HPSS의 시뮬레이션 결과를 사용하였으며, 세라믹 유전체 공진기를 사용하여 시제작 하였다. 이와 같은 방법으로 3단의 BPF를 설계 제작한 결과, 중심주파수 1.93 GHz에서의 삽입손실은 약 0.9 dB, 대역폭은 25 MHz를 나타냈다. 한편, 보다 복잡한 특성이 요구되는 경우에는3중모드 유전체 공진기간에 슬롯을 사용하여 결합시킬 수 있는 방법을 제시했다. 이와 같은 BPF는 차세대 이동 통신인 IMT-2000시스템에 응용될 수 있다.