• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.88-96
• /
• 2006

The objective of this research works is to develop back panel dies of PDP TV with a large size. In order to design the geometry of the dies and an initial size of blank optimally, the finite element analysis has been carried out using AUTOFORM V4.2. The conner radius of the upper trimming area and the distance from the outer line of the blank holder to the outer line of the blank have been selected as design parameters to remove the wrinkling of the trimming area. The results of the analyses have been shown that a feasible product without wrinkles and skid lines can be obtained when the conner radius ranges from 6mm to 8mm and the distance lines in the range of 40-60mm. From the proposed design of the dies and an initial blank size, the final die set of the back panel has been successfully manufactured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.351-352
• /
• 2008

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.155-165
• /
• 1994

An analog neural network circuit of rhigh density integration is introduced. It's prototype chip is designed in 3 by 3 mm2 die. It uses only one MOSFET to implement a synapse. The number of synapses per neuron can be expanded by cascading several chips. The influence of nonlinearity in synapses is analyzed. A formalization of the back propagation which can be applied to this circuit is shown. Some simulation results are shown and disscussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.309-312
• /
• 2005

DTM (Diamond Turning Machine) is using for ultra precision manufacturing such as, plastic lens die or aspherical optics. This study is on a design of precision 2-axis stage for DTM. We designed and manufactured a back lash free stage using different weights and measured the positioning accuracy using Interferometer. Also, the 2-D moving accuracy is measured using the high magnification CCD technique. Then, the stage is tested with the machining of spherical and aspherical lens in a DTM with air bearing spindle. It was shown that the back lash free stage is effective for improving the positioning accuracy. Also, positioning control errors in motion control board were able to be found using the proposed stages system.

• 소성∙가공
• /
• 제21권3호
• /
• pp.160-163
• /
• 2012

In this paper, a new approach to finite element analysis for tube swaging is presented. An analysis model is developed with emphasis on the pusher that imposes back pressure in order to keep the workpiece from slipping along the die-workpiece interface especially when tapered dies are used. A rigid-plastic finite element method is employed. The approach is to simulate the tube swaging process and the results are compared quantitatively with predictions, showing close agreement with each other.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.134-140
• /
• 2000

Tube hydroforming is a relatively new technology compared to conventional stamping. thus there is little knowledge base that can be utilized for process and die design. To remedy this situation considerable research is now being conducted by many researchers on significant aspects of tube hydroforming technology including material selection pre-form design hydroforking process and tool design. in the tube hydroforming process we frequently experence many failure modes like wrinkling. buckling folding back and fracture under the improper forming conditions. In this paper forming limit for failure occurrence such as fracture and wrinkling is examined theoretically and the result is compared with Back's experimental result.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권1호
• /
• pp.1-5
• /
• 2010

The studies have been conducted to control the soil borne fungal pathogens viz, Fusarium solani (Mart) Sacc. and Alternaria tenuissima the incitants of root rot and die-back diseases on mulberry stem cuttings planted in the mulberry nurseries and also in established mulberry gardens ten plant extracts with 10% concentration except Lantana camara (undiluted) were tested through poisoned food technique and four biofungicides were also screened by dual culture method under in vitro conditions. Plant extract of Prosopis juliflora showed the maximum inhibition on the mycelial growth (81.2% over A. tenuissima and 80.0% over F. solani) and followed by L. camara (66.7% over A. tenuissima and 68.9% over F. solani). Among the antagonists Pseudomonas fluorescens and Trichoderma viride showed maximum inhibition on the mycelial growth of both pathogenic fungi. The promising plant extracts (P. juliflora and L. camara) and antagonists (P. fluorescens and T. viride) were tested against both the pathogenic fungi under in vivo conditions along with the existing popular chemical Mancozeb. All the tested plant products and bio-fungicides showed inhibitory effect on both fungi. But the maximum survival percentage of mulberry cuttings was recorded in the treatment with T. viride (95% against F. solani and 90% against A. tenuisssima) followed by P. fluorescens (90% against both fungi) and T. harzianum (80% against F. solani and 85% against A. tenuisssima). Incase of the treatments with plant extracts and chemical fungicide the P. juliflora (60% against F. solani and 55% against A. tenuisssima) showed higher survival percentage and followed by L. camara (55% against F. solani and 50% against A. tenuisssima) and Mancozeb (55% against both fungi). In case of control only 10% of survival was recorded in F. solani inoculated cuttings and 15% survival in A. tenuissima inoculated cuttings.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.1-5
• /
• 2019

In this study, micro cellular injection molding of automobile head lamp housing with uneven thickness structure was performed to obtain improvement on deformation and light-weight of the part. The thickness of the presented model was uniformly modified to control the deformation of the molded part. In order to maximize the lightweight ratio, the model having an average thickness of 2.0 mm were thinly molded to an average thickness of 1.6 mm. GFM(Gas Free Molding) and CBM(Core Back Molding) technology were applied to improve the problems of the conventional foam molding method. Equal Heat & Cool system was also applied by 3D cooling core and individual flow control system. Warpage of the molded parts with even cooling was minimized. To improve the mechanical properties of foamed products, complex resin containing nano-filler was used and variation of mechanical properties was evaluated. It was shown that the weight reduction ratio of products with light-weighted injection molding was 8.9 % and the deformation of the products was improved from the maximum of 3.6 mm to 2.0 mm by applying Equal Heat & Cool mold cooling system. Also the mechanical strength reduction of foamed product was less than 12% at maximum.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.75-82
• /
• 2008

Flame bending has been extensively used in the shipbuilding industry for hull plate forming In flame bending it is difficult to obtain the desired shape because the residual deformation dependson the complex temperature distribution and the thermal plastic strain. Mechanical bending such as reconfigurable press forming multi-point press forming or die-less forming has been found to improve the automation of hull plateforming because it can more accurately control the desired shape than line heating. Multi-point forming is a process in which external forces are used to form metal work-pieces. Therefore it can be a flexible and efficient forming technique. This paper presents an optimal approach to determining the press-stroke for multi-point press forming of curved shapes. An integrated configuration of Finite element analysis (FEA) and spring-back compensation algorithm is developed to calculate the strokes of the multi-point press. Not only spring-back is modeled by elastic plastic shell elements but also an iterative algorithm to compensate the spring-back is applied to adjust the amount of pressing stroke. An iterative displacement adjustment (IDA) method is applied by integration of the FEA procedure and the spring-back compensation work. Shape deviation between the desired surface and deform￡d plate is minimized by the IDA algorithm.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.27-35
• /
• 2022

Thermoforming is a plastic manufacturing process that applies a force to stretch a film of heated thermoplastic material over an engineered mold to create a 3-dimensional shape. After forming, the shaped part can then be trimmed and finished to specification to meet an end-user's requirements. The process and thermoplastic materials are extremely versatile and can be utilized to manufacture parts for a very wide range of applications. In this study, based on K-BKZ nonlinear viscoelastic model, thermoforming process analysis was performed for an interior room-lamp. The predicted thickness was minimum at the corner of a molded film, and maximum at the center of the bottom. By using the Taguchi method of design of experiments, the effects of process conditions on residual stresses were investigated. The dominant factors were the liner thickness and the film heating time. As the thickness of the liner increased, the residual stress decreased. And it was found that the residual stress decreased significantly when the film heating temperature was higher than the glass transition temperature. A thermoforming mold and a trimming mold were manufactured, and the spring back was investigated through experiments. The dominant factors were film heating time, liner thickness, and lower mold temperature. As the film heating time and liner thickness increased, the spring back decreased. In addition, it was found that the spring back decreased as the lower mold temperature increased.