• 대한화학회지
• /
• 제28권3호
• /
• pp.194-202
• /
• 1984

陽이온 交換한 天然제올라이트에 依한 有機黃化合物의 液相吸着特性을 考察하였다. 平衡吸着量은 天然제올라이트의 交換한 陽이온과 吸着質인 有機黃化合物의 構造에 影響을 받고 있음을 알 수 있었다. 또한 平衡吸着量은 메르캅탄(mercaptane), 설파이드(sulfide), 디설파이드(disulfide), 치오펜(thiopen) 順으로 減小하였으며, 치오펜 誘導體의 경우는 ${\pi}$ 電子가 많아짐에 따라 吸着能은 교환 이온의 polarizing power에 比例하였다. 吸着速度로부터 有機黃化合物의 吸着은 pore 내의 擴散이 律速段階임을 알수 있었고, 水分과 같은 작은 吸着質은 micro pore에 吸着이 일어나는 反面, 有機黃化合物은 transitional-pore에 吸着이 일어났다.

• 공업화학
• /
• 제10권2호
• /
• pp.231-236
• /
• 1999

결정상과 분산도가 조절된 $MoO_3$/$SiO_2$ 담지촉매를 제조하여 촉매의 표면특성과 디벤조티오펜 탈황반응의 활성도를 고찰하였다. Mo의 표면담지량은 4 atoms $Mo/nm^2$이었으며, 실리카 표면 위에 형성된 $MoO_3$의 결정상은 sintered hexagonal, sintered orthorhombic, 및 dispersed hexagonal상이었다. XRD, Raman, 및 $O_2$ 흡착 결과 $MoO_3$의 표면분산도는 sintered hexagonal < sintered orthorhombic < dispersed hexagonal 순으로 증가하였다. TPR 결과 $MoO_3$ 결정은 $650^{\circ}C$에서 $MoO_2$로, $1000^{\circ}C$에서 Mo로 환원됨을 알 수 있었다. 디벤조티오펜 탈황반응을 30기압, $350{\sim}500^{\circ}C$ 온도범위에서 수행하였으며, 실험 결과 활성도는 $MoO_3$ 결정체의 $SiO_2$ 표면에서의 분산도에 비례하여 증가함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3065-3072
• /
• 2013

Direct synthesis of $H_2O_2$ and in situ oxidative desulfurization of model fuel over Au/Ti-HMS and Au/TS-1 catalysts has been comparatively investigated in water or methanol. Maximum amount (82%) of active $Au^0$ species for $H_2O_2$ synthesis was obtained. Au/Ti-HMS and Au/TS-1 exhibited the contrary performances in $H_2O_2$ synthesis as $CH_3OH/H_2O$ ratio of solvent changed. $H_2O_2$ decomposition and hydrogenation in water was inhibited by the introduction of methanol. Effect of $O_2/H_2$ ratio on $H_2O_2$ concentration, $H_2$ conversion and $H_2O_2$ selectivity revealed a relationship between $H_2O_2$ generation and $H_2$ consumption. The highest dibenzothiophene removal rate (83.2%) was obtained over Au/Ti-HMS in methanol at 1.5 of $O_2/H_2$ ratio and $60^{\circ}C$. But removal of thiophene over Au/TS-1 should be performed in water without heating to obtain a high removal rate (61.3%). Meanwhile, $H_2$ conversion and oxidative desulfurization selectivity of $H_2$ were presented.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.845-851
• /
• 2008

티타늄이 그라프팅(grafting)된 SBA-15 촉매(Ti-grafted SBA-15)상에서 TBHP(tert-butylhydroperoxide)를 산화제로 사용하여 회분식 반응기에서 모델 황화합물 및 실제 디젤 유분(LCO; Light Cylcle Oil)의 선택산화탈황(ODS; Oxidative Desulfurization) 반응을 수행하였으며, 티타늄 함량, 산화제/황의 몰비, 반응온도의 효과 및 반응속도상수와 활성화 에너지를 조사하였다. 티타늄이 5 wt% 도입된 Ti-grafted SBA-15 촉매는 난분해성 황화합물인 디벤조티오펜(DBT; Dibenzothiophene)과 4, 6-디메틸디벤조티오펜(4, 6-Dimethyldibenzothiophene)의 설폰(sulfone) 화합물로의 산화반응 시 표준반응조건(TBHP/S=2.5, $80^{\circ}C$, 1 atm)에서 반응개시 후 20분 뒤 100% 전환되는 우수한 활성을 나타내었다. 실제 디젤유분인 LCO를 원료로 성능 시험을 한 결과 활성이 우수하게 나타났으며 Ti-grafted SBA-15 촉매는 LCO에 함유 되어 있는 난분해성 황화합물의 선택적 산화탈황촉매로써 응용 가능성을 보였다.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.226-233
• /
• 2023

To create an environmentally sustainable fuel with a low sulfur concentration, requires alternative sulfur removal methods. During the course of this study, a high surface gamma alumina-supported ZnO nanocatalyst with a ZnO/-Al₂O₃ ratio of 12% was developed and tested for its ability to improve the activity of the oxidative desulfurization (ODS) process for the desulfurization of kerosene fuel. Scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) were used to characterize the produced nanocatalyst. In a digital batch baffled reactor (20~80 min), the effectiveness of the synthesized nanocatalyst was tested at different initial concentrations of dibenzothiophene (DBT) of 300~600 ppm, oxidation temperatures (25~70 ℃), and oxidation periods (0.5, 1, and 2 hours). The baffles included in the digital baffled batch reactor resist the swirling of the reaction mixture, thus facilitating mixing. The ODS procedure yielded the maximum DBT conversion (95.5%) at 70 ℃ with an 80-minute reaction time and an initial DBT level of 600 ppm. The most precise values of kinetic variables were subsequently determined using a mathematical modelling procedure for the ODS procedure. The average absolute error of the simulation findings was less than 5%, demonstrating a good degree of agreement with the experimental results acquired from all runs. The optimization of the operating conditions revealed that 99.1% of the DBT can be removed in 140 minutes.

• 한국패류학회지
• /
• 제30권4호
• /
• pp.371-381
• /
• 2014

The bioaccumulation of 16 United States Environmental Protection Agency (USEPA) priority polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs in the Manila clam, Ruditapes philippinarum exposed to sediments artificially contaminated by Iranian Heavy Crude Oil was measured and the biota-sediment accumulation factor (BSAF) was estimated through laboratory experiments. The proportion of 16 PAHs accumulated in the tissue of R. philippinarum was only from 3 to 7% of total PAHs. Among 16 PAHs, the concentration of naphthalene was highest in the tissue. Alkylated PAHs were highly accumulated more than 93% of total PAHs. The C3 dibenzothiophene was most highly accumulated. The relative composition of alkylated naphthalenes in the tissue of R. philippinarum was lower than in the sediments. In contrast, those of alkylated compounds of fluorenes, phenanthrenes, dibenzothiophenes were higher in the tissue than the sediments. The BSAF for sum of 16 PAHs was 0.11 to 0.13 g carbon/g lipid and that for alkylated PAHs was 0.05 to 0.06 g carbon/g lipid. Naphthalene showed the highest BSAF value. Alkylated PAHs with the same parent compound, BSAF tended to increase with the number of alkylated branch increased, except for alkylated chrysenes. BSAF of total PAHs lies between that of field-based values, and are also similar to those of other persistent organic pollutants (PCBs, DDTs, HCHs). This study provides the BSAF values of individual alkylated PAHs accumulated in R. philippinarum for the first time and will be used as a basis for further understanding the bioaccumulation of organic contaminants in the marine benthic organisms.