• 제목/요약/키워드: diaphragm compressor

검색결과 13건 처리시간 0.025초

Impact of Wet Etching on the Tribological Performance of 304 Stainless Steel in Hydrogen Compressor Applications

  • Chan-Woo Kim;Sung-Jun Lee;Chang-Lae Kim
    • Tribology and Lubricants
    • /
    • 제40권3호
    • /
    • pp.71-77
    • /
    • 2024
  • Hydrogen has emerged as an eco-friendly and sustainable alternative to fossil fuels. However, the utilization of hydrogen requires high-pressure compression, storage, and transportation, which poses challenges to the durability of compressor components, particularly the diaphragm. This study aims to improve the durability of 304 stainless steel diaphragms in hydrogen compressors by optimizing their surface roughness and corrosion resistance through wet etching. The specimens were prepared by immersing 304 stainless steel in a mixture of sulfuric acid and hydrogen peroxide, followed by etching in hydrochloric acid for various durations. The surface morphology, roughness, and wettability of the etched specimens were characterized using optical microscopy, surface profilometry, and water contact angle measurements. The friction and wear characteristics were evaluated using reciprocating sliding tests. The results showed that increasing the etching time led to the development of micro/nanostructures on the surface, thereby increasing surface roughness and hydrophilicity. The friction coefficient initially decreased with increasing surface roughness owing to the reduced contact area but increased during long-term wear owing to the destruction and delamination of surface protrusions. HCl-30M exhibited the lowest average friction coefficient and a balance between the surface roughness and oxide film formation, resulting in improved wear resistance. These findings highlight the importance of controlling the surface roughness and oxide film formation through etching optimization to obtain a uniform and wear-resistant surface for the enhanced durability of 304 stainless steel diaphragms in hydrogen compressors.

토모테라피를 이용한 간암환자의 정위적 방사선치료시 복부압박장치의 유용성 평가 (Usefulness of Abdominal Compressor Using Stereotactic Body Radiotherapy with Hepatocellular Carcinoma Patients)

  • 우중열;김주호;김준원;백종걸;박광순;이종민;손동민;이상규;전병철;조정희
    • 대한방사선치료학회지
    • /
    • 제24권2호
    • /
    • pp.157-165
    • /
    • 2012
  • 목 적: 간에 발생한 절제 불가능한 원발성 및 전이성 종양에서 토모테라피를 이용한 정위적 방사선치료를 시행하기 위해 사용된 복부압박장치의 유용성을 평가하고자 하였다. 대상 및 방법: 2011년 11월부터 2012년 3월까지 토모테라피(Hi-Art Tomotherapy, USA)를 시행받기 위해 본원에 내원한 간암환자 중 복부압박장치(diaphragm control, elekta, sweden)를 사용하였을 때 움직임이 1 cm 이상 줄어든 환자를 대상으로 하였다. 4D CT (somatom sensation, siemens, germany)를 통해 치료계획영상과 4차원 단층촬영영상을 촬영하고, 육안적으로 보이는 종양과 종양의 움직임을 고려하여 육안적 종양체적(gross tumor volume, GTV)으로 설정하였고, GTV 주변으로 균일하게 5~7 mm의 여유를 주어 치료계획용 종양체적(planning target volume, PTV)으로 설정하였다. 손상위험장기(organs at risk) 중 십이지장, 위, 대장의 거리가 종양으로부터 최소 1 cm 이상인 환자들을 1군($d{\geq}1$)으로, 1 cm 미만인 환자들을 2군(d<1)으로 분류하고 각각 4~5회의 정위적 방사선치료와 20회의 방사선치료를 계획하였다. Mega-voltage computed tomograpy (MVCT)와 kilo-voltage computed tomograpy (KVCT)를 일차적으로 골격구조셋팅(bone-technique)으로 융합(fusion)한 뒤, 이차적으로 간을 보며 영상을 재조정 하였다. 치료 후 얻은 MVCT 영상을 영상변형이 가능한 Mim_vista (Mimsoftware, ver. 5.4 USA)로 보내고, 간을 비교하여 다시 묘사(delineate)하고, 손상위험장기 중 십이지장, 위, 소장, 대장을 합쳐서 대장장기(bowel_organ)로 정의하여 다시 묘사하였다. 보정방사선 치료계획시스템을 통하여 보정영상의 치료계획 선량과 보정된 선량의 차이를 평가하였다. 첫 번째, 치료 시작일부터 각각 1군($d{\geq}1$)은 4회, 2군(d<1)은 10회까지의 MVCT와 KVCT간의 영상 융합을 통한 셋업오차를 분석하였다. 두 번째, 보정영상에서 종양 즉, GTV, PTV의 치료계획선량과 보정선량의 3%의 선량차이를 나타내는 체적($V_{diff3%}$)과 5%의 선량차이를 나타내는 체적($V_{diff3%}$)을 비교하였고, 손상위험장기 중 대장장기의 최대선량의 차이율을 비교하였다. 결 과: MVCT를 통해 분석한 평균 셋업오차는 $-0.66{\pm}1.53$ mm (좌-우), $0.39{\pm}4.17$ mm (상-하), $0.71{\pm}1.74$ mm (전-후), $-0.18{\pm}0.30$ degrees (roll)였다. 1군($d{\geq}1$)과 2군(d<1)의 셋업오차는 유사하였다. 1군($d{\geq}1$)에서 보정방사선 치료계획을 통한 $V_{diff3%}$ 중 GTV는 $0.78{\pm}0.05%$, PTV는 $9.97{\pm}3.62%$, $V_{diff5%}$ 중 GTV는 0.0%, PTV는 $2.9{\pm}0.95%$, 대장장기의 최대선량의 차이율은 $-6.85{\pm}1.11%$였다. 2군(d<1)에서 $V_{diff3%}$ 중 GTV는 $1.62{\pm}0.55%$, PTV는 $8.61{\pm}2.01%$, $V_{diff5%}$ 중 GTV는 0.0%, PTV는 $5.33{\pm}2.32%$, 대장장기의 최대선량의 차이율은 $28.33{\pm}24.41%$였다. 결 론: 복부압박장치를 통한 간암의 방사선치료시 MVCT를 통한 환자 셋업오차는 평균 ${\pm}5$ mm 이하였고, 복부 압박장치를 사용하고 투시영상을 통해 확인한 횡경막의 움직임이 최소 5 mm 이상이라는 것을 감안하면, 환자 셋업오차는 그 안에 있음을 알 수 있었다. 1군($d{\geq}1$)과 2군(d<1)에서 GTV, PTV의 선량차이율은 오차범위 안에 있었고, 1군($d{\geq}1$)과 2군(d<1)의 대장장기 최대선량의 차이율은 최대 35% 이상의 차이를 보였고, 1군($d{\geq}1$)이 2군(d<1)보다 오차범위가 작았다. 따라서 간내 종양과 손상위험장기의 거리가 최소 1 cm 이상 유지된다면 정위적 방사선치료를 진행함에 복부압박장치가 도움이 될 수 있을 것으로 사료된다.

  • PDF

벨로우즈 방식의 폐회로를 가진 공압식 심실 보조장치의 최적 작동을 위한 압력 조절 시스템 (Pressure Regulation System for Optimal Operation of the Pneumatic VAD with Bellows-Type Closed Pneumatic Circuit)

  • 김범수;이정주;남경원;정기석;안치범;선경
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권4호
    • /
    • pp.569-576
    • /
    • 2007
  • Ventricular Assist Device(VAD) has switched its goal from a short-tenn use for bridge-to-transplantation to a long-tenn use for destination therapy, With this goal, the importance of long-tenn reliability gets more interests and importances, H-VAD is an portable extracorporeal biventricular assist device, and adopts an electro-pneumatic driving mechanism. The pneumatic pressure to pump out blood is generated with compression of bellows, and is transmitted in a closed pneumatic circuit through a pneumatic line. The existing pneumatic VAD adopts a air compressor which can generate stable pressures but has defects such as a noise and a size problem. Thus, it is not suitable for being used as a portable device, These problems are covered with adopting a closed pneumatic circuit mechanism with a bellows which has a small size and small noise generation, but it has defects that improper pneumatic setting causes a failure of adequate flow generation. In this study, the pneumatic pressure regulation system is developed to cover these defects of a bellows-type pneumatic VAD. The optimal pneumatic pressure conditions according to various afterload conditions for an optimal flow rate were investigated and the afterload estimation algorithm was developed, The final pneumatic regulation system estimates a current afterload and regulate the pneumatic pressure to the optimal point at a given afterload condition. The afterload estimation algorithm showed a sufficient performance that the standard deviation of error is 8.8 mmHg, The pneumatic pressure regulation system showed a sufficient performance that the flow rate was stably governed to various afterload conditions. In a further study, if a additional sensor such as ultrasonic sensor is developed to monitor the direct movement of diaphragm in a blood pump part, the reliability would be greatly increased. Moreover, if the afterload estimation algorithm gets more accuracy, it would be also helpful to monitor the hemodynamic condition of patients.