• 기술사
• /
• 제17권3호
• /
• pp.6-21
• /
• 1984

A rock slide in amount of 100 tons in weight happened at 7: 10 a.m., 4th October 1982, on the southwestern ridge of Mt. Seunghag, Busan City. The original rock mass of the rock slide is located 850m west from the Dangri Crushed Stone Quarry. The geology of the area consists of agglomerate, andesite, andesitic tuff, and shale hornfels of the Cretaceous Yucheon Group. The rock blocks were first shifted along the steep joint plane on an andesite outcrop at the site and then to the eastern foot of the mountain slope where some private houses are placed. The mountain slope is covered with thick superficial soil. A slided monolithic-block with 83 tons in weight from the rock slide met with an accident of striking against a house with a tremendous force, to which much damage was done as much as its half was destroyed. The rock-slided block pierced the board-floored room only posited at the center and by the bedroom of the house making a pass like a bullet hole, and hence cut a big pine tree with 24 centimeters in diameter at a distance of 26 meters down the house. However nobody was killed or injured in the stricken house, though seven family members were stayed therein at the very time of accident. They really met a rare opportunity in an unhappy disaster. Measurements of the rock slide were made in the course of the field survey. The monolithic mass was transported by way of saltation, rolling, and sliding to a distance of 300 meters down along the slope dipping 30$^{\circ}$ east. It took about 16 seconds front tile outcrop to the terminal. The acceleration value of the monolithic rock slide is 2.35m/sec$^2$.

• 식물병연구
• /
• 제22권4호
• /
• pp.284-288
• /
• 2016

식물 생장촉진근권세균 B. vallismortis BS07M을 점토로 제형화한 제제(CP)는 고추의 생육촉진 및 병저항성 유도 효과를 보였다. CP를 육묘 상토에 혼합하는 것은 기존의 세균 현탁액을 유묘 또는 포장에서 재배 중에 관주 살포하는 방법에 비해 비교적 사용하기 쉽고, 그 효과가 포장에서도 지속됨으로써 고추의 열매 개당 무게를 증가시켰으며, 수확 후 저장 중에 자연적으로 발생하는 무름 증상을 감소시킴으로써 보관기간을 늘리는 효과가 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2135-2146
• /
• 2022

A nuclear energy facility is one of the most critical facilities to be safely protected during and after operation because the physical destruction of its barriers by an external attack could release radioactivity into the environment and can cause harmful effects. The barrier walls of nuclear energy facilities should be sufficiently robust to protect essential facilities from external attack or sabotage. Physical protection system (PPS) vulnerability assessment of a typical small nuclear research reactor was carried out by simulating an external attack with a tri-nitro toluene (TNT) shaped charge and results are presented. The reinforced concrete (RC) barrier wall of the research reactor located at a distance of 50 m from a TNT-shaped charge was the target of external attack. For the purpose of the impact assessment of the RC barrier wall, a finite element method (FEM) is utilized to simulate the destruction condition. The study results showed that a hole-size of diameter 342 mm at the front side and 364 mm at the back side was created on the RC barrier wall as a result of a 143.35 kg TNT-shaped charge. This aperture would be large enough to let at least one person can pass through at a time. For the purpose of the PPS vulnerability assessment, an Estimate of Adversary Sequence Interruption (EASI) model was used, which enabled the determination of most vulnerable path to the target with a probability of interruption equal to 0.43. The study showed that the RC barrier wall is vulnerable to a TNT-shaped charge impact, which could in turn reduce the effectiveness of the PPS.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.115-119
• /
• 2011

Si Nanowire (NW) field effect transistors (FETs) were fabricated on hard Si and flexible polyimide (PI) substrates, and their electrical characteristics were compared. Si NWs used as channels were synthesized by electroless etching method at low temperature, and these NWs were refined using a centrifugation method to get the NWs to have an optimal diameter and length for FETs. The gate insulator was poly(4-vinylphenol) (PVP), prepared using a spin-coating method on the PI substrate. Gold was used as electrodes whose gap was 8 ${\mu}m$. These gold electrodes were deposited using a thermal evaporator. Current-voltage (I-V) characteristics of the device were measured using a semiconductor analyzer, HP-4145B. The electrical properties of the device were characterized through hole mobility, $I_{on}/I_{off}$ ratio and threshold voltage. The results showed that the electrical properties of the TFTs on PVP were similar to those of TFTs on $SiO_2$. The bending durability of SiNWs TFTs on PI substrate was also studied with increasing bending times. The results showed that the electrical properties were maintained until the sample was folded about 500 times. But, after more than 1000 bending tests, drain current showed a rapid decrease due to the defects caused by the roughness of the surface of the Si NWs and mismatches of the Si NWs with electrodes.

• 대한전자공학회논문지TC
• /
• 제44권1호
• /
• pp.155-161
• /
• 2007

본 논문은 이동 통신 단말기에 사용되는 PCS 와 위성 DMB 이중 대역에서 동작 하는 기생패치를 이용한 적층형 헬릭스 모노폴안테나의 설계 및 제작 측정에 관한 논문이다. 안테나의 부피를 줄이기 위한 적층형 헬릭스 구조를 구현하기 위해 유전체의 윗면과 아랫면에 인쇄되어 있는 헬릭스 부분을 직경 0.35 mm 그리고 높이 0.4 mm 인 비아를 사용하였다. 그리고 이중 대역 동작을 위해 윗면과 아랫면 사이에 기생 패치를 삽입하였다. 이중 대역의 첫 번째 동작 주파수와 두번째 동작 주파수의 비는 기생패치의 구조적 변수에 의해 변화된다. 제작된 안테나는 유전율이 4.2 인 FR-4 기판을 사용하였고 면적은 $15.5{\times}7.6{\times}0.4 mm^3$ 이다. 측정된 대역폭(VSWR<2)은 PCS 대역에서 240 MHz 이고 위성 DMB 대역에서 250 MHz 이다.

• 한국전자파학회논문지
• /
• 제17권10호
• /
• pp.993-999
• /
• 2006

본 논문은 이동 통신 단말기에 사용되는 DCS, PCS / 위성 DMB 이중 대역에서 동작하는 이중 커플드 라인을 이용한 적층형 미앤더 칩 안테나의 설계 및 제작 측정에 관한 논문이다. 안테나의 면적을 줄이기 위한 적층형 미앤더 구조를 구현하기 위해 유전체의 윗면과 아랫면에 인쇄되어 있는 미앤더 부분을 직경 0.35 mm 그리고 높이 0.8 mm인 비아를 사용하였다. 그리고 이중 대역 동작을 위해 적층형 미앤더 구조에 이중 커플드 라인을 연결하였다. 이중 대역 동작 주파수 간 비는 커플드 라인의 구조 변수에 의해 변화된다. 제작된 안테나는 유전율이 4.2인 FR-4 기판을 사용하였고 면적은 $15.2{\times}7{\times}0.8mm^3$이다. 측정된 대역폭(VSWR<2)은 DCS, PCS 대역에서 244 MHz이고 위성 BMB 대역에서 120 MHz이다.

• 한국연소학회지
• /
• 제19권2호
• /
• pp.8-14
• /
• 2014

Experiments were conducted to clarify role of the outermost edge flame on low-strain-rate flame extinction in buoyancy-suppressed non-premixed methane flames diluted with He and $N_2$. The use of He curtain flow produced a microgravity level of $10^{-2}-10^{-3}g$ in $N_2$- and He-diluted non-premixed counterflow flame experiments. The critical He and $N_2$ mole fractions at extinction with a global strain rate were examined at various burner diameters (10, 20, and 25 mm). The results showed that the extinction curves differed appreciably with burner diameter. Before the turning point along the extinction curve, low-strain-rate flames were extinguished via shrinkage of the outermost edge flame with and without self-excitation. High-strain-rate flames were extinguished via a flame hole while the outermost edge flame was stationary. These characteristics could be identified by the behavior of the outermost edge flame. The results also showed that the outermost edge flame was not influenced by radiative heat loss but by convective heat addition and conductive heat losses to the ambient He curtain flow. The numerical results were discussed in detail. The self-excitation before the extinction of a low-strain-rate flame was well described by a dependency of the Strouhal number on global strain rate and normalized nozzle exit velocity.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.277-283
• /
• 2002

본 연구는 안쪽축이 회전하고 바깥쪽 실린더는 정지해있는 반경비가0.52이고 30$^{\circ}$ 경사진 동심 환형관내의 헬리컬 유동 특성에 관한 것이다. 비뉴튼 유체인 UC 수용액과 벤토나이트 수용액을 사용하여 안쪽축이 0~400pm으로 회전할 때 축방향 유동을 완전히 발달시킨 후 축방향 압력손실값을 측정하였다. 또한, 헬리컬 유동의 가시화는 불안정한 파를 관찰하기 위해 수행되었다. 현재 연구 결과는 표면마찰계수에 대해 로스비순(Ro)와 레이놀즈수(Re)의 관계를 나타내었다. 또한, 그 결과들은 유동 불안정성 메카니즘의 존재를 보인다. 축회전수가 증가함에 따라 압력손실이 증가하지만, 그 증가폭은 천이 및 난류영역에서는 레이놀즈수가 증가할수록 감소하며, 회전의 영향으로 유동교란이 증진되어 천이가 촉진된다. 또, 이런 유동교란의 증진은 표면마찰계수값의 증가와 함께 임계 레이놀즈수(Re$_{c}$)를 작게 만든다.

• 대한치과의사협회지
• /
• 제49권4호
• /
• pp.203-210
• /
• 2011

The aims of this study were to evaluate the adequate thickness of opaque resins for situations such as an oral black cavity and discolored tooth structure, as well as the translucency of each opaque material at various thicknesses. Six opaque-shade composite resins (Z-350 OA3, Amelogen Universal A2O, Esthet-X A2O, Esthet-X A4O, Charmfil UO and Aelite Universal OA3) were prepared in metal molds with a hole of 8 mm in diameter and various thicknesses (0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0 mm and 4.0mm). Four backgrounds (white tile, black tile, C4 shade porcelain and opaque resin itself) were used to determine the translucency parameter (between black and white backgrounds). and to mimic a black oral cavity (between black and opaque resin backgrounds) and a discolored tooth structure (between C4 and opaque resin backgrounds). Color measurements were made by a colorimeter to determine the CIELAB values of each specimen with each background and to calculate the translucency parameter and ${\Delta}E^*$ value difference among the specimens on the backgrounds. The translucency parameter and ${\Delta}E^*$ obtained between black and opaque resin backgrounds decreased in similar pattern as thickness increased. A C4 background was masked by resin thicknesses of 0.5-1.0mm, while a black background required thicknesses of 1.0-2.0mm. Adequate knowledge about differences in the optical character like translucency of the materials used is essential, together with the accumulated experience of the individual clinician.

• Journal of Radiation Protection and Research
• /
• 제11권2호
• /
• pp.130-138
• /
• 1986

CA 80-15 및 LR 115-1 cellulose nitrate 비적검출기를 사용하여 지표공기중의 ${\alpha}$방사능을 측정 해석하였는바 이 검출기의 검출효율은 $0.1{\mu}Ci$의 $^{241}Am\;{\alpha}$선을 사용하여 결정하였다. 지표에서 방출되는 라돈과 그 자핵종들에 의한 ${\alpha}$방사능을 검출하기 위하여 두가지의 라돈컵을 사용하였으며 이들을 각각 지름이 15cm, 깊이가 45cm인 이웃한 두개의 땅구덩이를 만들어 그 안에 설치하여 일정기간 ${\alpha}$방사능에 노출하였다. 두 라돈컵중 하나는 구덩이 지표면에 거꾸로 밀착시켜 밀폐공간이 되게 하고 다른 하나는 바닥에서 일정한 거리를 띄우고 컵 윗면에 구멍을 뚫어 공기의 소통이 가능하도록 하여 그 검출결과를 비교 검토하였다. ${\alpha}$입자에 피폭된 비적검출기는 부식처리한 후 현미경으로 판독하고 통계분석 하였으며 그 결과를 지표공기 단위부피당 ${\alpha}$방사능농도로 환산 평가하였다.