• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.3
• /
• pp.353-360
• /
• 2006

This study identified a particle size distribution (PSD) of fine particulate matter and emission characteristics of V and Ni by the comparison between anthropogenic sources of oil combustion (industrial boiler, oil power plant, etc.) and lab-scale combustion using a drop-tube furnace. In oil combustion source, the mass fraction of fine particles (less than 2.5 micrometers in diameter) was higher than that of coarse particles (larger than 2.5 micrometers in diameter) in $PM_{10}$ (less than 10 micrometers in diameter) as like in lab-scale oil combustion. In addition to this, it was identified that ultra-fine particles (less than 0.1 micrometers in diameter) had a large distribution in fine particles. Toxic metals like V and Ni had large mass fractions in fine particles, and most of all was distributed in ultra-fine particles. Most of ultra-fine particles containing toxic metals have been emitted into ambient by combustion source because it is hard to control by the existing air pollution control device. Hence, we must be careful on these pollutants because it is obvious that these are associated with adverse health and environmental effect.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.101-105
• /
• 2003

This experiment was conducted to find out the effect of day length on the production of high quality plug seedlings in onion (Allium cepa L.). Two cultivars, ‘Changnyongdaego’ and‘Wolryun’, were grown to seedlings in 200-cell plug trays under 11.5, 12.5, 13.5 hours and natural day length. These seedlings were transplanted to the pot (16 cm In diameter) and grown under 16 hours day length. Number of leaves and neck diameter showed better growth in the longer than shorter day length treatments, but plant height old sheath length were retarded in the longer day length treatments. Growth such as no. of leaves, neck diameter, plant height and sheath length increased with the passage of day, but plant height and neck diameter decreased by treatment over 20 days with 13.5 hours day length. Bulbing and bulb size of onion after transplanting were enhanced in the seedlings cultured under longer day lengths. From the above results, treatment of long day length during seedling culture in plug tray can control the overgrowth and produce high quality plug seedlings.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1598-1603
• /
• 2004

This paper is an experimental study on the performance characteristic with a variation of capillary diameter and length. The performance characteristic of a refrigeration system is predicted that it is occurring changes of flow pattern and pressure drop in a capillary tube because of reduction of capillary diameter 0.74 to 0.6 mm. The difference between experimental results and analytical results is mainly caused by values of friction factor for using to calculate pressure drop through a small diameter capillary tube under 0.74mm. The experimental equation is derived from capillary tube test data using curve fitting method.

• Journal of Veterinary Clinics
• /
• v.3 no.1
• /
• pp.265-276
• /
• 1986

Pathological study was made of 173 gallbladders among 652 slaughter pigs. The size and the pH of the bile juice were made of 50 among 173 gallbladders with lesions and 50 normal gallbladders as control. The results are summerized as follows : 1. The histological lesions were shown hyperemia and congestion(83.2%), Iymphocytic infiltration(37.5%), Iympoid hyperplasia(27%), epithelial downgrowth(27%), erosion and ulcer(22%), papillary hyperplasia (20.2%), pericholecystic edema(19.5%), hemorrhage(11%), and leukemic cell infiltration(0.6%). 2. In the gallbladders with lesions mean size was 4.26${\times}$7.88cm in diameter and mean pH is 7.2. In the control means size and mean pH were 4.57${\times}$8.13cm in diameter and 7.1. The difference of size between gallbladders with lesions and these as control was not statistically significant. The pH of bile juice between two showed also no statistically significant difference.

• Wind and Structures
• /
• v.29 no.1
• /
• pp.55-64
• /
• 2019

The effect of vortex impingement on the fluid dynamics around a cylinder submerged in the wake of another of different diameters is numerically investigated at a Reynolds number Re = 200. While the diameter (D) of the downstream cylinder is fixed, impinging vortices are produced from the upstream cylinder diameter (d) varied as d/D = 0.24, 0.4, 0.6, 0.8 and 1.0, with a spacing ratio L=5.5d, where L is the distance between the center of the upstream cylinder to the front stagnation point of the downstream cylinder. Two-dimensional simulations are carried out using the finite volume method. Fluid forces acting on the two cylinders are correlated with impinging vortices, vortex shedding, and wake structure. Different facets of wake formation, wake structure, and flow separation and their connections to fluid forces are discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.171-175
• /
• 2006

The aim of this in vitro study was to test the effect of microinjection (Mi) of foreign gene into the rabbit egg pronucleus and epidermal growth factor (EGF) addition on the blastocyst rate, the cell number and the diameter of embryos, and to determine possible relationships between embryo cell number and embryo diameter. Blastocyst rate was significantly decreased in gene- Mi (G-Mi/E0) group (63.1%) comparing to intact ones (83.5%, $p_1$<0.05). The addition of EGF at 20ng/ml (G-Mi/E20) or 200 ng/ml (GMi/ E200) to gene-Mi embryos did not affect blastocyst rate (65.6 and 55.2% resp.). As a control for Mi, the eggs were microinjected with the same volume of phosphate-buffered solution (PBS-Mi) instead of the gene construct solution. Cell numbers and embryo diameters were measured from embryo images obtained on confocal laser scanning microscope. Bonferroni-modified LSD test showed that the embryo cell number in PBS-Mi group was significantly lower ($p_1$<0.05) and in gene-Mi group was tended to decrease compared with intact embryos. Embryo diameter was not different among experimental groups. No effect of EGF given at any doses both on the cell number and embryo diameter was found. A positive correlation between cell number and embryo diameter was observed in all groups of embryos. Since embryo diameter was not changed under the influence of Mi or EGF addition in this study, this seems to be more conservative characteristics of the embryo morphology. These results suggest that the pronuclear microinjection compromises developmental potential of embryos, decreasing blastocyst rate and embryo cell number, whilst embryo diameter is not affected. No effects of EGF on studied parameters were confirmed. Declined quality of Mi-derived embryos is caused by the microinjection procedure itself, rather than by the gene construct used.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.61-65
• /
• 2013

Modified atmosphere (MA) of reduced $O_2$ and elevated $CO_2$ concentrations has been used for keeping the quality of fresh produce and extending the shelf life. As a way to attain the beneficial MA package around the produce, a gas diffusion tube or perforation can be attached onto the container and controlled on real time in its opening/closing responding to $O_2$ and $CO_2$ concentrations measured by gas sensors. The timely-controlled opening of the gas diffusion tube can work in harmony with the produce respiration and help to create the desired MA. By use of the mathematical modeling, the effect of tube dimension on the controlled container atmosphere was figured out in this study. Spinach and king oyster mushroom were used as typical commodities for designing the model container system (0.35 and 0.9 kg in 13 L, respectively) because of their respiration characteristics and the optimal MA condition ($O_2$ 7~10%/$CO_2$ 5~10% for spinach; $O_2$ 2~5%/$CO_2$ 10~15% for mushroom). With a control logic for the gas composition to stay as close as possible to optimum MA window without invading injurious low $O_2$ and/or high $CO_2$ concentrations, the atmosphere of the sensor-controlled container could stay at its lower $O_2$ boundary or upper $CO_2$ limit under certain tube dimensional conditions. There were found to be the ranges of the tube diameter and length allowing the beneficial MA. The desired range of the tube dimension for spinach consisted of combinations of larger diameter and shorter length in the window of 0.3~2 cm diameter and 0.2~10 cm length. Similarly, that for king oyster mushroom was combinations of larger diameter and shorter length in the window of 0.9~2 cm diameter and 0.2~3 cm in length. Clear picture on generally affordable tube dimension range may be formulated by further study on a wide variety of commodity and pack conditions.

• Journal of Forest and Environmental Science
• /
• v.28 no.4
• /
• pp.227-231
• /
• 2012

Reforestation is one of the most important ways to reduce erosion soil. The objective of this study was to determine the effect of jellyfish soil amendment on seedling growth for reforestation. 100g jellyfish soil amendment was applied into planting hole for the purpose of improvement of the Chamaecyparis obtusa seedling growth. Results showed that during growing period, mortality were 4.4% for the fertilized group and 8.3% for control group. The seedling average height and root diameter were 95.0 cm and 1.07 cm in fertilized group and 40.6 cm and 0.74 cm in control group. The fertilized group was found to be superior (by 1 to 5%) to control group in terms of mortality rate, seedlings height, and root diameter. The positive growth of the fertilized group can be due the increase in soil moisture and the higher availability of nutrients to the plants from jellyfish fertilizer.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.365-372
• /
• 2020

This study was conducted to compare the effects of foliar spray and sub-irrigation of the triazole fungicide diniconazole on the regulation of stem elongation and to investigate the stimulation of root system development during the seedling stage. Comparing the two application approaches, there were significant differences in the leaf area, leaf area ratio (LAR), plant height, compactness, fresh shoot and root production, relative growth rate (RGR), and root to shoot ratio (R/S). At the same application concentration, the sub-irrigation showed a better retarding effect on growth than the foliar spray, because the PGR activity of diniconazole in root absorption was higher than that in shoot absorption. For reaching a target of 20% to 30% inhibition rate of stem length, foliar application concentration of diniconazole exceeded 10, however, only approximately 1 was required in the sub-irrigation application. The root system of tomato seedlings responded strongly to diniconazole application. Total root length, root volume, root average diameter, and the number of root tips increased when diniconazole was sub-irrigation application at 1. A reduction in fine roots (diameter range of 0 to 0.3 mm) and an increase in the roots with a diameter range of 0.3 to 0.6 mm was observed, and this may contribute to the increase in average diameter. The increase in root average diameter may be positive because root penetration increases with root diameter. Our results suggested that sub-irrigation maximized the PGR activity of diniconazole to enhance the retarding effect. And it also possible to enhance the tomato seedling root system by diniconazole stimulating with a lower concentration.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.236-244
• /
• 1995

Droplet size is one of the important factors in the deposition and drift of agrichemical application. In this study, droplet size and its distribution of the three different sizes of ceramic hollow cone nozzles being used in the air carrier sprayer for apple production were investigated at the various nozzle pressures and the three air velocities. The Malvern particle size analyzer were used for the measurement of droplet size and its distribution. The important results emerged from th is study can be summarized as follows. 1. Discharged rate was increase with the increase of the nozzle diameter and pressure, amount of the difference was remarkable between the nozzle diameter of 1.0, 1.2 and 1.5 mm, but no difference were found between the diameter of 1.0 and 1.2 mm in the same nozzle pressure. 2. Mass median diameter were varied as 40~160 ${mu}m$ at the air velocity of 0 m/s, 70~140 ${mu}m$ of 15 m/s and 100~160 ${mu}m$ of 20 m/s 3. It appeared that the air velocity range of 15~20 m/s was desirable for both drift and deposition control in the given experimental conditions.