• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.26-33
• /
• 2010

A multi-MW wind turbine is a huge mechanical structure, of which the rotor diameter is more or less than 100 m. Rotor blades experience unsymmetric mechanical loads caused by the interaction of incoming wind with the tower and wind shear effect. These mechanical loads are transferred to the entire structure of the wind turbine and are known as the major reasons for shortening the life span of the wind turbine. Therefore, as the size of wind turbine gets bigger, the mitigation of mechanical loads becomes more important issue in wind turbine control system design. In this paper, a concept of an individual pitch control(IPC), which minimizes the mechanical loads of rotor blades, is introduced, and simulation results using IPC are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1996-1998
• /
• 1998

This paper deals with the tension control of continuous processing line for steel plant. In order to improve the tension control performance, tension control is included in POR. FF compensation is applied to get the same speed characteristics during acceleration and deceleration period. In simulation roll diameter variation and inertia variation are considered. It becomes clear that the proposed tension control system has high accuracy performance.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.253-256
• /
• 2000

In order to commercialize the low cost composite fabrication technology in the area of domestic aerospace structure field, Resin Transfer Molding process has been considered as an alternative process to replace the high cost autoclave technology. The end part for the development of RTM process is the control rod of flight control system of aircraft. A braided preform was triaxially designed to improve the dimensional stability and mechanical property in the direction of external loads. Through the flow analysis using CVFEM, the resin filling time was calculated and the resin injection method was determined. The results of the flow analysis were directly applied to RTM mold design. The control rod was successfully manufactured by RTM process using internal pressure. The length and outer diameter of the manufactured part are 1148mm and 32mm, respectively.

• Advances in aircraft and spacecraft science
• /
• 제9권1호
• /
• pp.39-57
• /
• 2022

Instead of developing new guided missiles, converting unguided missile into guided ones by adding guidance and controlkits hasbecome aglobaltrend.Ofthemost efficient andwidelyused thrust vector control(TVC) techniquesin rocketry isthe jet vanes placed inside the nozzle divergentsection. Upon deflecting them, lift created on the vanesistransferred to the rocket generating the desired control moment. The presentstudy examinesthe concept of using an add-on jet vaneTVC kit to a plain nozzle.The impact of adding the kit with different vaneslocations and deflectionanglesisnumericallyinvestigatedbysimulatingtheflowthroughthenozzlewiththekit.Twohingelocations are examined namely, at 24% and 36% of nozzle exit diameter. For each location, angles of deflection namely 0°, 5°, 10°, and 15° are examined. Focus is made on variation of control force, thrust losses, lift and drag on vanes, jet inclination, and jetflow structure withTVCkit design parameters.

• 현장농수산연구지
• /
• 제12권1호
• /
• pp.21-27
• /
• 2010

The objective of this study was to determine the effects of "Green-one" organic nutrient on mycelial growth and fruiting of P. ostreatus. The dilution concentrations of "Green-one" was treated as follows. There was control, 100, 200, 400 concentrations. That treatments were treated with step of each mycelial growth step. The best of growth steps was mycelial scratching step. At that time, DPI(Day required for primordial formation after inoculation) was shortened for 1 day. Valid germination stipe are 15 pieces, 3 pieces more than control. Stipe length and stipe diameter was long each 4mm, 3mm more than control. Pileus size is shortened than control. Yields per one bottle(g/850cc) was 146g increased 6.5% than control 137g/850cc.

• 생물환경조절학회지
• /
• 제6권4호
• /
• pp.250-257
• /
• 1997

본 연구의 목적은 온실재배 토마토에서 경직경의 경시적 변화와 식물체내 수분, 토양수분, 증산 및 일사량 등과의 관계를 정량적으로 파악하여 토마토 경직경의 monitoring에 의한 관개시기 진단 방법을 모색하는 것이다. 스트레인게이지로 제작한 경직경 미소변화 측정장치와 load cell을 이용하여 각각 경직경 변화 및 지상부 생체중의 변화를 1996년 7월 1일부터 16일까지 10분 간격으로 계측하였으며, 또한 토양 수분함량, 증산, 일사량 등도 동시에 관측하였다. 실험을 시작하기 전에 충분한 관개를 하였으며 이후는 외관상으로 위조증상이 나타나기 시작할 매 관개를 하였다. 생체중과 경직경은 매우 유사한 일변화를 보였는데 해뜰 무렵인 오전 6시경에 최대치에 이르고 이후 일사량과 증산의 증대에 따라서 감소하기 시작하여 중산이 최대에 이르는 시각보다 다소 늦은 오후 3시경에 최저에 달하였다가 일사 및 증산의 감소에 따라서 다시 증대하여 경직경의 변화와 체내수분함량의 변화와는 매우 밀접한 관계가 있었다. 수분부족 증상이 없었던 날들의 일당 경직경 증가량(DI) 및 생체중 증가량(DG)은 일사량과 높은정의 상관을 보였으나 수분부족장애를 받은 날들은 일사량에 따른 이들의 기대치보다 현저하게 낮아 생체중 및 경직경 증대가 매우 둔화되거나 오히려 감소하여 이를 기준으로 관개시기를 정확하게 판단하는 것이 가능하였다. 실험기간 중 7월 10일의 경우 외관상으로는 위조증상이 없었으나 증산량은 현저히 감소하여 식물체가 수분부족 상태였던 것으로 판단되었는데 이 날 토중 l0cm 및 20cm에서의 토양수분 포텐샬은 -0.2bar 이상으로 전일과 큰 차이가 없었으나 경직경 및 생체중의 증가는 현저히 둔화되어 수분 부족을 잘 반영하였다. 한편 낮 동안의 생체 중 최대감소량(ML)과 경직경 최대수축량(MC) 역시 일사량과 유의한 정의 상관을 보여 일사량 및 증산량 증대에 따라 체내 수분 손실량이 증대하고 이에 따라서 경직경이 감소하는 한계를 보였다. 그리고 식물의 수분장애가 심한 경우에는 일사량에 따른 이들의 기대치보다 현저하게 높았으나 수분장애가 미약한 경우에는 기대치와 구별하기가 어려워 이들을 기준으로 관개 시기를 정확하게 판단하기는 어려운 것으로 판단되었다. 따라서 관개시기의 판단에는 토양수분, MC 및 ML을 기준으로 하는 것보다 DG 또는 DI를 기준으로 하는 것이 효율적인 것으로 판단되었다.

• Clinical and Experimental Reproductive Medicine
• /
• 제12권2호
• /
• pp.71-79
• /
• 1985

Systemic extrogen therapy promotes multiple preantral follicular development in immature mice. Estrogen pretreated ovaries might therefore be a useful source of cells for in vitro studies of oocytes maturation. Silastic capsules (5.0 mm length; 3.18 mm outer diameter, 1.57 mm inner diameter) filled with diethylstilbesterol were implanted subcutaneously in experimental mice (ICR) for up to 6 days. Ovarian weight and histology in diethylstilbesterol pretreated and control animal were assessed before and after pregnant mare serum gonadotrophin treatment and after human chorionic gonadotrophin. The following results were obtained; 1. Ovarian weight was significantly increased by 6 days of diethylstilbesterol pretreatment. Subsequent ovarian weight gain in response to pregnant mare serum gonadotrophin and human chorionic gonadotrophin was increased. 2. Diethylstilnbesterol pretreatment stimulated the developed healthy preantral follicles. 3. Forty eight hours after pregnant mare serum gonadotrophin treatment, a larger number of the antral follicles which developed in diethylstilbesterol pretreated animals showed signs of atresia, whereas in the control ovaries there was a higher incidence of premature luteinization. 4. Forty eight hours after human chorionic gonadotrophin, numerous corpora lutea and occasional luteinized unruptured follicles were present in both control and diethylstilbesterol ovaries. 5. Ovulation rate, fertilization rate and subsequent preimplantation development in vitro were not adversely affected by diethylstilbesterol pretreatment. However, there was considerable variation in the ovulation rate the number of animals with more than 60 ovulations was greater in the diethylstilbesterol gorup (52.4%) as compared to the control (33.3%).

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8274-8283
• /
• 2015

텔레비전의 가스 스프링은 롱 스트로크 (200 ~ 300mm, TV 상승 변위) 하에서 작동 할 때 피스톤 속도의 제어가 가능하다. 이 원리에 의해서 사용자는 높낮이 조절이 가능하다. 먼저 피스톤의 흐름 해석을 수행하였다. 정확한 관형 단면을 위한 피스톤 속도 조절기술을 조사하였다. 유동률 제어 및 높낮이 작용을 위한 피스톤 구조를 제안되었다. 본 연구는 대형 텔레비전 스탠드를 통해 50 인치 이상 TV의 가스 스프링의 개발을 위한 것이다. 최적 피스톤 로드 제어를 위한 중공축(외경 19.9mm, 내경 13.9mm)에 질소 개스(0.3m/s)를 주입하였다. 그 결과, 유동율이 증대함에 따라 피스톤 로드의 압력강하는 외력의 변화 없이 증대되었다. 결과적으로, 가스스프링을 통한 변위의 제어는 가능하다.

• 대한치과보철학회지
• /
• 제43권6호
• /
• pp.745-750
• /
• 2005

Statement of problem. Resonance frequency analysis has been increasingly served as a non-invasive and objective method for clinical monitoring of implant stability. Many clinical studies must be required for standardized data using RFA. Purpose. This study was performed to evaluate RFA value changes in two anodized implant groups. Material and method. Among a total of 24 implants, twelve screw shaped implants as a test group (H2-R8.5) were manufactured, which had a pitch-height of 0.4 mm, an outer diameter of 4.3 mm, a length of 8.5 mm, and external hexa-headed, were turned from 5 mm rods of commercially pure titanium (ASTM Grade IV, Warantec Co., Seoul, Korea), and another twelve implants as a control group were $Br{\aa}nemark$ Ti-Unite MK4 (diameter 4.0 mm, length 8.5 mm). Each group was installed in tibia of rabbit. Two implants were placed in each tibia (four implants per rabbit). Test two implants were inserted in right side and control two in left side. ISQ values were measured using $Osstell^{TM}$ (Integration Diagnostics Ltd. Sweden) during fixture installation, and 12 weeks later and evaluated the RFA changes. Results. Mean and SD of baseline ISQ values of test group were $75.0{\pm}3.4$ and $68.7{\pm}8.1$ for control group. Mean and SO of ISQ values 12 weeks after implant insertion were $73.2{\pm}4.7$ for test group and $72.6{\pm}3.9$ for control group. There were no statistically significant differences between groups in ISQ values after 3 months (P>0.05). From the data, RFA gains after 3 months were calculated, and there was statistically significant difference between groups (P<0.05). Conclusion. Although there were RFA changes between groups, implant stability after experimental period shows alike tendency and good bone responses.

• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.647-653
• /
• 2014

Background Administration of growth factors has been associated with increased viability of composite grafts greater than 1-cm in diameter. Platelet-rich plasma (PRP) contains many of the growth factors studied. In this study, we evaluate the effect of PRP injection on composite graft viability and the proper time for injection. Methods A total of 24 New Zealand White rabbits were divided into four groups. Autologous PRP was injected into the recipient sites three days before grafting in group 1, on the day of grafting in group 2, and three days after grafting in group 3. Group 4 served as control without PRP administration. Auricular composite grafts of 3-cm diameter were harvested and grafted back into place after being rotated 180 degrees. Median graft viability and microvessel density were evaluated at day 21 of graft via macroscopic photographs and immunofluorescent staining, respectively. Results The median graft survival rate was 97.8% in group 1, 69.2% in group 2, 55.7% in group 3, and 40.8% in the control group. The median vessel counts were 34 (per ${\times}200$ HPF) in group 1, 24.5 in group 2, 19.5 in group 3, and 10.5 in the control group. Conclusions This study demonstrates that PRP administration is associated with increased composite graft viability. All experimental groups showed a significantly higher survival rate and microvessel density, compared with the control group. Pre-administration of PRP was followed by the highest graft survival rate and revascularization. PRP treatments are minimally invasive, fast, easily applicable, and inexpensive, and offer a potential clinical pathway to larger composite grafts.