• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.138-143
• /
• 2000

In order to maintain the faith and accuracy with precision of machinery, it is recently required the precise comprehension about approach which is appeared in the contact area between two bodies, because approach affects the static stiffness and dynamic characteristic of contact area. This study applied H. Hertz's circle contact area theory as much lower measuring force. It is measured approach influenced by various factors which were concerned with contact errors like material, form of two bodies, using calibration tester. As a result, the following conclusion can be obtained. 1) The approach appears greatly in order of carbon steel(SM20C), aluminum(A601-T6) and high density polyethylene(5305E) 2) The approach appears in order of concave, disc, convex form, in the ration of contact area size by the difference of curvature.

• 한국측량학회지
• /
• 제4권2호
• /
• pp.77-87
• /
• 1986

구조물의 변형측정에 있어서 Strain gauge, Inclinometer, Dial gauge등을 이용한 방법과 측지학적인 방법들은 기구설치의 어려움과 경제적인 면은 물론 정확도면에서도 많은 문제점을 안고있다. 이에 최근 다방면으로 활용이 증대되고 있는 C. R. P(Close-Range Photogrammetry) 기법을 토목구조물의 변형측정에 적용하여 이를 공선조건으로 해석하였다. 피사체로 현수교모형을 제작하였으며 재하변형측정 실험을 실여, Dial gauge, Precision level, 정밀삼각측양을 통한 측정값과 비교하여 그의 타당성을 제시하였다. 또한 실구조물에 적용시 발생하는 제반문제점들을 고려하기위해 Camera 회전인자 $\omega$,$\psi$ 노출점높이 Z$_{L}$, 기선경사각 $\theta$의 변화를 다양하게 실험하여 그의 특성을 고찰하였다. 실험결과 Dial gauge, 정밀 Level, 정밀 삼각측양으로 측정한 변형양과 C. R. P로 측정한 변형양은 10$\mu\textrm{m}$ 이내의 증차로 상호접근하였으며 X와Z 좌표에 대한 표준오차는 수렴각 약 60$^{\circ}$에서 Y좌표는 수렴각 약 90$^{\circ}$에서 가장 작았으며 Z$_{L}$의 변화는 오차에 별다른 영향을 주지않는다. 또한 $\theta$가 증가함에따라 본 실험조건하에서는 Normal Case에서 30$^{\circ}$까지 Convergent Case에서는 15$^{\circ}$까지 양호한 정도를 보였으며 $\psi$와 $\omega$가 동시에 증가할수록 정도가 급격히 저하되며 특히 Y좌표의 정도에 많은 영향을 미침을 알 수 있었다. 이들 결과로 볼때 C. R. P해석기법은 정도와 경제적인 면에서 각종 구조물의 변형측정에 그 효용이 기대된다.대된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.58-63
• /
• 1996

A study is drawn up its result's tables and graphs by measuring tools(outside micrometer cylinder gauge and dial caliper gauge) on the difference of diameter volumes from before-discharge and after-discharge under 52 Kind's experimental condition by cupper and graphite electrode of CNC EDM. The EDM is attached with A.V.R. and memory scope for keep up accuracy and the fixed table of work piece is used in order to eliminate the noise by the internal resistance of it and forcing to eradicate the discharge liquid. It is analyzed cutting conditions to compare its wave value and pulse time.(Ton Toff) through voltage and current for decreasing working error.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.355-373
• /
• 2017

도심지에서의 터널굴착은 상부구조물과의 상호거동에 대한 이해가 필수적이다. 도심지에 사용중인 대부분의 구조물은 말뚝기초로 상부의 하중을 지지하고 있어, 터널 굴착 시 반드시 영향을 받는다. 따라서 본 연구에서는 실내모형시험을 통해 기존의 군말뚝 기초 하부 터널굴착에 따른 축력 분포와 지반의 거동을 분석하였다. 말뚝 기초는 2, 3 열 말뚝으로 가정되었으며, 말뚝 선단부와 터널 천단부의 이격거리는 터널직경에 대한 일반화를 위해 터널 직경(D) 대비 0.5D, 1.0D 그리고 1.5D로 고려되었다. 지반은 약 30%의 상대밀도(Dr)를 가지는 느슨한 사질토로 형성되었으며, 말뚝의 축력 분포를 측정하기 위해 말뚝에 변형률게이지(strain gauge)를 부착하였다. 또한, 이격거리에 따른 군말뚝의 침하와 인접지반의 침하를 변위센서(linear variable differential transformer; LVDT)와 다이얼게이지(dial gauge)를 통해 측정였으며, 터널굴착에 따른 지중의 변형을 근거리사진계측기법(close range photogrammetric technique)을 통해 측정하였다. 수치 해석을 통해 실내모형시험 및 근거리사진계측 결과와 비교 분석하였다. 본 연구에서는 체적손실율(volume loss; $V_L$) 개념을 이용하여 터널굴착을 모사하였으며, 1.5%로 적용되었다. 연구결과, 이격거리가 멀어질수록 말뚝의 축력감소는 작게 나타났으며, 침하량은 모두 유사한 경향을 나타내었다. 특히, 말뚝 선단부와 터널 천단부의 이격거리가 0.5D에서 1.0D로 증가할 때 축력과 침하량의 가장 큰 감소율이 가장 큰 것으로 나타났다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.195-203
• /
• 2001

The purpose of this study is to estimate ultimate uplift capacity of permanent anchor which was cast into weathered rock. The ultimate uplift capacity was estimated from the load-displacement curve of four different anchors which have different bond length. The creep test was performed for 15minutes under the maximum load of each step in order to understand the load-transfer property of permanent anchor and to decide which anchor to choose. The destruction range of soil due to the changes in load was estimated by installing dial gauge on the ground which was cast into the weathered rock. Ultimately, the study on the behavior of the anchor case into the weathered rock was performed by comparing and analyzing the estimated result of the UUC obtained by the full scale pull out test in the field with the exsting theoretical and practical results of soil and rock anchor.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.151-156
• /
• 2002

Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this study was to investigate the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%), W-C ratios, and curing days at a controlled environment of 60% of relative humidity and 2$0^{\circ}C$ of temperature. The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower than that of OPC and RSC, respectively. This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.517-522
• /
• 2000

In the past few years, the nondestructive inspection technology has greatly developed due to the increased necessity to gain a complete understanding of the bridge behavior. Especially, the deformations of bridges contain a lot of informations about its health state. By measuring these deformations it is possible to analyze the loading and aging behavior of the structure. However, the current methods (such as LVDT, dial gage, optical displacement tranceducer, etc) are often of changeable application on site and have the limitations of installation. In this paper, the classical beam theory was reviewed and the deflections of structure are estimated using measured strain which is easy to acquire. The applicability of this algorithm is verified by a preliminary steel beam test and two types of concrete beam tests. Also fiber optic sensors as well as resistive strain gages were installed in the concrete beams to establish the applicability of fiber optic sensors in the field of civil engineering.

• 대한치과의사협회지
• /
• 제11권11호
• /
• pp.735-737
• /
• 1973

This study is to determine the exact position of tipping rotation center of root. The method of measurement is to record by means of dial gauge. The different shapes of root of lower second premolar are named as smooth type, tapered type, and curved type. The followings are the result ; 1. The tipping rotation center of the teeth varies with he shape of roots. 2. The rotation center of the root is placed apical one third portion upon roots in the smooth shape of roots, one half portion of roots in the taper shape of roots and below the apical one-third of root in curve shape.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.436-439
• /
• 2005

In general a square master and a dial gauge are used to measure the axis squareness on the spot. This method is a comparison measurement and its accuracy depends on the square accuracy wholly. Therefore the accuracy of a square master is very important and it is impossible that the accuracy of a square measurement is superior to the accuracy of a square master. In this paper, the new method of square measurement is proposed for measuring square without a square master and easily. This method is an absolute measurement by using a reversal method and can be used to measurement the accuracy of a square master.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.518-525
• /
• 2009

논문은 샌드위치 복합재가 적용된 바이모달 트램의 설계검증을 위한 구조 성능 시험과 유한요소 해석에 대해 기술하였다. 차체 구조물에 적용된 샌드위치 복합재는 알루미늄 하니컴 심재와 WR580/NF4000 유리섬유/애폭시 면재로 구성되었다. 이때, 차체 구조물의 구조 시험은 JIS E 7105 규정에 따라 수직하중, 압축하중, 비틀림 및 고유진동수 시험이 각각 수행되었다. 그리고 다이얼게이지, 스트레인게이지, 가속도 센서를 통해 얻어진 처짐, 응력, 고유전동수 결과에 따른 구조 안전성을 평가하였다. 그리고 Ansys v11.0을 이용하여 유한요소해석을 수행하였고, 구조 시험 결과와 비교하였다. 구조 시험 결과는 제안된 유한요소 모델을 사용한 구조 해석 결과와 처침, 응력, 고유진동수가 비교적 잘 일치함을 확인하였다.