• 한국연소학회지
• /
• 제8권1호
• /
• pp.36-45
• /
• 2003

The subject of turbulent premixed flames has been focused by many researchers for a number of decades. Especially, Borghi suggested a magnificent diagram classifying turbulent combustion areas and Lipatnikov and Chomiak modified this diagram. Recently, experimental techniques have been developed so that we can use PIV for measuring 2D velocity field and apply OH PLIF techniques for obtaining flame locations. In present study, a new diagram is proposed using strain rates and OH signal intensity. Thus, simultaneous PIV and OH PLIF measurements are used for shear strain rates and flame locations, respectively. It is believed that the shear strain rates represent flow characteristics such as turbulence intensity and the OH intensity indicates the flame characteristics such as burning velocities.

• 산업공학
• /
• 제16권2호
• /
• pp.156-166
• /
• 2003

Proposed in this paper is a standard-compliant business process modeling tool which is based on the UML(Unified Modeling Language) activity diagram and produces an XPDL(XML Process Definition Language) file as an output. The XPDL is a standard process definition exchange format by WfMC (Workflow Management Coalition). To develop an UML/XPDL-based modeling tool, the mapping of modeling elements between activity diagram and XPDL format is conducted after the detailed analysis of each modeling specification. As a result of this mapping, it is revealed that modeling elements of each activity diagram and XPDL must be expanded. So new modeling elements are identified and added to each specification. Based on this mapping, the prototype system is developed, and the usefulness of the developed system is shown through the case study.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.58-65
• /
• 1990

The purpose of this study is to consider the effects of strain rate on the stress-strain behavior of sheet metal at instability. The results and conclusions obtained as follows ： 1. As the strain rate increases, the fracture pressure increases and the polar height at fracture decreases. 2. The effect of strain rate on forming limit diagram produces a general lowering of the diagram with increasing strain rate but changes according to materials and strain paths. 3. The forming limit diagram predicted by swift instability theory is comparatively inconsistent with the experimental result at high strain rates, because there is inevitable gap between them.

• 한국강구조학회 논문집
• /
• 제13권2호
• /
• pp.163-176
• /
• 2001

본 논문에서는 뒴비틀림 효과를 고려한 휨비틀림 이론을 기초로 연속곡선보를 해석한다. 먼저 단순곡선보에 대해 미분방정식으로 단면력과 변위를 구한다. 다음 에너지법을 이용하여 n경간 연속곡선보에 대한 탄성방정식으로 연속곡선보의 임의점에서 단면력과 변위의 해를 구한다. 작용하중으로 수직집중하중과 수직등분포하중을 고려하여 해석하였으므로 실제 하중이 작용하는 연속곡선박스거더의 단면력과 변위를 쉽게 구할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.594-597
• /
• 2005

In this paper, I-PDA controller based on Coefficient Diagram Method incorporating feedforward controller is applied by robotic manipulators. Robotic manipulator models contain uncertain elements, which are not known exactly. Therefore, the dynamics of robotic manipulators are generally classified as uncertain dynamic system. The controller considered for the robotic manipulators need to move payloads of different masses from one point to another with good balance of the stability and response, consequently we propose I-PDA controller based on Coefficient Diagram Method incorporating FFC. The effectiveness of the controller for different system type of robotic manipulators is demonstrated by the simulation results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2000

This paper presents a method to identify the on-set of chatter by using the chatter frequency-spindle speed diagram for a milling spindle-workpiece system in face milling process. To this purpose, the eigenvalue problem approach using frequency response function is adopted for predicting both the chatter condition and chatter frequency. The chatter frequency -spindle speed diagram for various conditions is investigated throughout simulation and experiment to diagnose the chatter. The simulation and experimental results show that the chatter frequency-spindle speed diagram is useful for diagnosis of the on-set of chatter vibration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.438-441
• /
• 2006

Since the behavior of structural members subjected to blast load shows different responses, the effect of impulse as well as peak load should be considered in the damage analysis. The threshold on P-I diagram that causes specific damage level divides the diagram into the failure zone and the non-failure zones. In this study, numerical analysis is performed based on single-degree-of-freedom (SDOF) techniques to generate rational P-I diagram considering material non-linearity and dual failure modes (flexure and direct shear) of RC beams. From the comparison with existing test results it is concluded that proposed numerical method is good to derive failure mode of RC beam under blast load.

• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.247-252
• /
• 2004

본 논문에서는 검출된 특징점에 대해 보로노이 다이어그램을 사용하여 이동과 회전에 불변인 정합 알고리즘을 제안한다. 보로노이 다이어그램에 의해서 검출되는 각각의 특징점과 그에 인접한 특징점들 사이의 거리와 각도를 데이터베이스에 저장하고 인증을 요청한 지문의 정보를 같은 방법으로 변환 후 데이터베이스 내의 정보들과의 비교를 통해서 결과를 출력한다. 이는 기존의 인덱싱 기반 알고리즘에 비해 더욱 정확한 알고리즘이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.634-637
• /
• 2010

본 논문에서는 UML 클래스 도해의 저작도구를 위한 MVC 모델의 설계를 제시하고자 한다. MVC 모델의 설계에서 View, Controller, Model 컴포넌트를 정의하고 각각의 컴포넌트의 역할을 서로 독립적으로 부여하고 수행하도록 설계 한다. 뷰(View)는 Gui를 나타내고, 컨트롤러(Controller)는 데이터의 입력과 출력을 담당하며, 모델(Model)은 비즈니스 로직을 처리한다. 클래스 도해의 저작도구를 위한 MVC 모델의 설계는 각각의 컴포넌트 특징에 맞게 나눠서 독립적으로 역할을 부여하고 시스템을 유연하도록 한 것이 특징이다.

• 대한전기학회논문지
• /
• 제35권11호
• /
• pp.487-494
• /
• 1986

This paper is concerned with the techniques of error check and reduction of state diagram using logic programming. Error check program aims to check not only syntax errors but also semantic errors. And reduction program optimizes the state diagram by finding the redundant equivalence states and removing those from the set of states. The input of both program is state diagram represented as state table form. The output of error check program is error comment. The output of reduction program is equivalence reduced state table. Both programs are implemented using prolog. Prolog has very powerful pattern matching, and its automatic back-tracking capabilities facilitate easy-to-write error check and reduction programs.