• 한국컴퓨터산업학회논문지
• /
• 제3권2호
• /
• pp.149-158
• /
• 2002

본 논문에서는 광컴퓨터의 개발에 이용될 수 있는 산술논리연산회로(ALU)를 설계하고 검증한다. 전자회로 기술의 접목이 용이하고 가장 상용화가 잘된 $LiNbO_3$ 광스위칭 소자에 기반한 이 ALU는 산술논리 동작을 실행하는 연산회로, 오퍼런드와 연산결과를 저장하는 메모리 소자 그리고 명령어 선택을 위한 부가회로로 구성되며, 비트 단위 직렬 방식으로 동작하는 것이다. 본 논문에서는 또한 설계한 ALU 회로의 정확성을 검증할 수 있는 시뮬레이터를 구현하고, 일련의 기본 명령어들을 순차적으로 실행하면서 메모리와 누산기에 저장된 값의 단계적 변화를 확인하는 시뮬레이션을 통하여 설계한 ALU가 정확함을 보인다.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.962-967
• /
• 2004

A bogie is the device that connects a car body and wheel sets of a rail vehicle. It is the critical component that determine:; the running safety, The bogie consists of a frame, suspensions, brakes and wheel sets. Various analyses including a numerical simulation using a finite element method, a static load test, a fatigue test, ai)d r running test should be carried out to design the bogie. However cracks have been found at some end beams of the bogies mounted on the freight cars running with the high speed. The cracks of the end beam results in deterioration of the brake performance an the running safety, A new design has been suggested to solve this problem by ROTEM company and it's performance has been tested in this paper. Numerical simulations and dynamic tests are carried out to figure out the causes of cracks in the conventional bogie, and the vibrational characteristics of the improved bogie are compared with those of the conventional one.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.519-527
• /
• 1996

Most operation related to the application granular agrochemicals in korea are manual and labour consuming. As a multipurpose granular applicator, a pneumatic granular applicator that can be attached to conventional ride -on machines for paddy field was designed in this study. Experiments and simulations were carried out for determine in the design factors with one fertilizer (DongBu 21-17-17) and one pesticide (SamKong Ivi). The maximum terminal velocity of granular chemicals was estimated as 14.2m/s. A better distribution pattern was obtained at the diffuser having only deflectors without dividing guides. The diffuser spacing 1.0m for the fertilizer and the diffuser spacing 0.8m for the pesticide at the boom height over 0.80m were acceptable for the uniform distribution. In the case that the forward speed of ride-on machines was 0.7m/s, the groove opening and the roller speed of the selected metering device were13mm -15mm at 2 rps for the fertilizer, and 9 mm-11mm at 0.25rps or the pesticide. This study suggested a method of developing a pneumatic applicator for granular agrochemicals.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.703-708
• /
• 2002

An elastomeric bushing is a device used in automotive suspension systems to reduce the load transmitted from the wheel to the frame of the vehicle. A bushing is an elastomeric hollow cylinder which is bonded to a solid steel shaft at its inner surface and a steel sleeve at its outer surface. The relation between the load applied to the shaft or sleeve and the relative deformation of Elastomeric bushing is nonlinear and exhibits features of viscoelasticity. A load-displacement relation fur elastomeric bushing is important fur dynamic numerical simulations. A boundary value problem for the bushing response leads to the load-displacement relation which requires complex calculations and is hence unsuitable. Therefore, by modifying the constitutive equation for a nonlinear viscoelastic incompressible material developed by Lianis, the data fur the elastomeric bushing material was obtained and this data was used to derive the new load-displacement relation fur radial response of the bushing. After the load relaxation function for the bushing is obtained from the step displacement control test, Pipkin-Rogers model was developed. Solutions were allowed for comparison between the results of Modified Lianis model and those of the proposed model. It is shown that the proposed Pipkin-Rogers model is in very good agreement with Modified Lianis model.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.84-92
• /
• 2014

In this paper, a novel 5-axis hybrid-kinematic machine tool is introduced and the research results on accuracy improvement of the prototype machine tool are presented. The 5-axis hybrid machine tool is made up of a 3-DOF parallel manipulator and a 2-DOF serial one connected in series. The machine tool maintains high ratio of stiffness to mass due to the parallel structure and high orientation capability due to the serial-type wrist. In order to acquire high accuracy, the methodology of measuring the output shafts by additional sensors instead of using encoder outputs at the motor shafts is proposed. In the kinematic view point, the hybrid manipulator reduces to a serial one, if the passive joints in the U-P serial chain at the center of the parallel manipulator are directly measured by additional sensors. Using the method of successive screw displacements, the kinematic error model is derived. Since a ball-bar is less expensive than a full position measurement device and sufficiently accurate for calibration, the kinematic calibration method of using a ball-bar is presented. The effectiveness of the calibration method has been verified through the simulations. Finally, the calibration experiment shows that the position accuracy of the prototype machine tool has been improved from 153 to $86{\mu}m$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권12호
• /
• pp.4269-4292
• /
• 2014

Currently, increasing numbers of access points (AP) are being deployed in enterprise offices, campuses and municipal downtowns for flexible Internet connectivity, but most of these access points are idle or redundant most of the time, which causes significant energy waste. Therefore, with respect to power conservation, applying energy efficient strategies in WIFI networks is strongly advocated. One feasible method is dynamically managing network resources, particularly APs, by powering devices on or off. However, when an AP is powered on, the device is initialized through a long boot time, during which period clients cannot be associated with it; therefore, the network performance would be greatly impacted. In this paper, based on a global view of an entire WLAN, we propose an AP selection technology, known as Temporary Access Selection (TAS). The criterion of TAS is a fusion metric consisting of two evaluation indexes which are based on throughput and battery life, respectively. TAS is both service and clients' preference specific through balancing the data rate, battery life and packet size. TAS also works well independently in traditional WLANs in which no energy efficient strategy is deployed. Moreover, this paper demonstrates the feasibility and performance of TAS through experiments and simulations with Network Simulator version 3 (NS3).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.703-722
• /
• 2016

Passive wireless devices have increasing civilian and military applications, especially in the scenario with wearable devices and Internet of Things. In this paper, we study indoor localization of a target equipped with radio-frequency identification (RFID) device in ultra-wideband (UWB) wireless networks. With known room layout, deterministic multipath components, including the line-of-sight (LOS) signal and the reflected signals via multipath propagation, are employed to locate the target with one transmitter and a single inaccurate receiver. A factor graph corresponding to the joint posterior position distribution of target and receiver is constructed. However, due to the mixed distribution in the factor node of likelihood function, the expressions of messages are intractable by directly applying belief propagation on factor graph. To this end, we approximate the messages by Gaussian distribution via minimizing the Kullback-Leibler divergence (KLD) between them. Accordingly, a parametric message passing algorithm for indoor passive localization is derived, in which only the means and variances of Gaussian distributions have to be updated. Performance of the proposed algorithm and the impact of critical parameters are evaluated by Monte Carlo simulations, which demonstrate the superior performance in localization accuracy and the robustness to the statistics of multipath channels.

• 한국화재소방학회논문지
• /
• 제24권2호
• /
• pp.52-57
• /
• 2010

비상발전용 전원으로 많이 사용되고 있는 전동기시스템은 비상 발전 시 외에는 거의 사용하지 않고 있어 비효율적이다. 반면에, 태양광 발전시스템을 이용하면 평상시 전력을 저장하여 계통 연계형 시스템으로 사용할 수 있어 많은 활용도가 있다. 본 논문에서는 범용 시뮬레이터인 PSPICE를 이용하여 시뮬레이션을 수행 할 수 있도록 PV시스템에 사용되는 각종 모델들을 라이브러리화 하였다. 또한 비상발전용 전원으로 사용하기 위한 태양광 시스템의 특성을 모델링하고 설계 해석하여 실제 사용하는데 효과적인 장치를 만들수 있음을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.463-467
• /
• 2000

In this paper, the new LIGBT structures with trap injection are proposed to improve switching characteristics of the conventional SOI LIGBT. The Simulations are performed in order to investigate the effects of the positiion, whidth and concentration of trap injection region with a reduced minority carrier lifetime using 2D device simulator MEDICI. Their electrical characteristics are analyzed and the optimum design parameters are extracted. As a result of simulation, the turn off time for the model A with the trap injection is $0.78\mus$. These results indicate the improvement of about 2 times compared with the conventional SOI LIGBT because trap injection prevents minority carriers which is stored in the n-drift region during turn off switching. The latching current is $1.5\times10^{-4}A/\mum$ and forward blocking voltage is 168V which are superior to those of conventional structure. It is shown that the trap injection is very effective to reduce the turn off time with a little increasing of on-state voltage drop if its design and process parameters are optimized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.538-541
• /
• 2002

탄소나노튜브 (CNT)가 도포된 평면형 에미터와 원형 개구의 게이트 전극을 가지는 삼전극 전계방출 소자의 전계방출 특성을 시뮬레이션하였다. 체계적인 시뮬레이션을 위해 소자 내 전위의 공간적 분포 특정을 결정하는 전계형상인자 $\gamma$를 정의하고 이 값에 따른 전위분포의 특성과 방출 전자의 궤적을 계산하였다. 계산 결과$\gamma$ > 1 인 전압조건에서는 에미터의 가운데를 중심으로 강한 전자방출이 발생하고 전자빔이 구조의 축 방향으로 자체 집속됨을 알 수 있었다. 이렇게 되면 에미터와 게이트의 정렬이 전혀 필요하지 않게 되며 또한 별도의 전자집속회로 없이도 에미터와 양극에 있는 형광체가 1:1 로 대응하는 획기적인 디스플레이 구조를 가능하게 해 준다 적정 전압조건에서 CNT의 전계강화인자 $\beta$의 변화에 따른 총 전류를 계산한 결과，$\beta$ >3000인 CNT를 사용할 경우 실제 소자로서 구현이 가능함을 확인하였다.