• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.117-118
• /
• 2022

High-strength concrete is used for building durability on the coast. It is common to order and produce the concrete from several ready mixed concrete companies. The concrete in Busan was also commissioned by 12 ready mixed concrete companies. The compressive strength and salt diffusion coefficient were measured. The average value and deviation were analyzed.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.2
• /
• pp.158-163
• /
• 2004

Curve tessellation, which generates a sequence of points from a curve, is very important for curve rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal deviation. Our approach has two merits. One is that it guarantees satisfaction of a given tolerance, and the other is that it can be applied in not only a polynomial curve but its offset. Especially the point sequence generated from an original curve can cause over-cutting in NC machining. This problem can be solved by using the point sequence generated from the offset curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.

• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.14-17
• /
• 2015

In the data from synthetic resin makers, there is no shrinkage deviation through injection molding. But, after making the required products, even in the same conditions, there are some size-deviation in colors. Into our research, we checked main factor by the injection molding conditions. Our tests have shown this results, there are some shrinkage deviation in collors and, in the injection molding conditions, packing pressure is the main factor.

• Journal of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.835-845
• /
• 2017

The $GCF_{\epsilon}$ expansion is a new class of continued fractions induced by the transformation $T_{\epsilon}:(0, 1]{\rightarrow}(0, 1]$: $T_{\epsilon}(x)={\frac{-1+(k+1)x}{1+k-k{\epsilon}x}}$ for $x{\in}(1/(k+1),1/k]$. Under the algorithm $T_{\epsilon}$, every $x{\in}(0,1]$ corresponds to an increasing digits sequences $\{k_n,n{\geq}1\}$. Their basic properties, including the ergodic properties, law of large number and central limit theorem have been discussed in [4], [5] and [7]. In this paper, we study the large deviation for the $GCF_{\epsilon}$ expansion and show that: $\{{\frac{1}{n}}{\log}k_n,n{\geq}1\}$ satisfies the different large deviation principles when the parameter ${\epsilon}$ changes in [-1, 1], which generalizes a result of L. J. Zhu [9] who considered a case when ${\epsilon}(k){\equiv}0$ (i.e., Engel series).

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.151-152
• /
• 2016

This paper presents a neutral point deviation compensating control algorithm applied to a 3-level NPC converter under generalized unbalanced ac input conditions. The neutral point deviation is analyzed with a focus on the current flowing out of or into the neutral point of the dc-link in 3-level NPC converter. The model of neutral point deviation and neutral current are also constructed. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converter and its impact on neutral point deviation. This paper includes the harmonic characteristic of neutral point current under various imbalance AC operating conditions.

• Proceedings of the KWS Conference
• /
• 1993.05a
• /
• pp.120-124
• /
• 1993

The Charpy V impact test on subsize was performed on narrow laser welds of low carbon steel sheets, joined by using a continuous wave 3kW CO$_2$ laser. Under certain conditions, a bimodal fracture behaviour has been experienced in Charpy V impact test of narrow laser beam welds. Deviation of the fracture path from the fusion zone into the base metal was dominated at high test temperature. It can be seen that the deviation always occurred after ductile initiation. If the deviation occurs on a small testing specimen, the same trend would happen on the actual laser welded structure. Fracture will then propagate through the base material even if the weld metal has low toughness.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.5
• /
• pp.263-270
• /
• 2003

In field applications, to represent the degree of voltage unbalance, the maximum voltage deviation from the average is preferred to the voltage unbalance factor based on symmetrical component analysis. This paper first clarifies the relationship between the voltage unbalance factor and the maximum deviation factor showing that the maximum deviation factor approximates the voltage unbalance factor under relatively low unbalanced conditions. Several alternative ways of approximation are introduced and examined by comparing with the conventional maximum deviation factor. It appears that these alternatives provide more accurate approximation to the voltage unbalance factor over wider range of voltage unbalance while maintaining simplicity in their formula.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.479-486
• /
• 2012

Runoff characteristics of pollutant loads of the lower Han River was studied before full implementation of Total Pollution Load Management System(TPLMS). Magnitude of macroscopic(annual) fluctuation was in the order of Namhan River > Han River > Bukhan River, gross weight TP > gross weight TN > gross weight BOD, gross weight deviation > concentration deviation. Flux variation was higher than that of concentration. Microscopic(weekly) fluctuation showed similar pattern to macroscopic scale. TP showed the highest deviation resulting in the lowest reliability. 60% of annual flux passed during summer 3months resulting in 43-46% pass of gross weight at the lower Han River. Strong correlation was found between flux and gross weight especially in gross weight TN. Gross weight pollution increased as high as 400% while passing Seoul area due to the concentration. The deviation from moving average increased during summer season in the gross weight TP and BOD. Seasonal tendency was confirmed especially in gross weight TN and TP using autocorrelation function.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.323-327
• /
• 1995

A new air knife system for coating thickness control in hot dip galvanizing process had been developed and installed on the CGL in Pohang Steel Works, POSCO. This new system consists of air knives with remotely adjustable nozzle slot and an automatic control system which can control both longitudinal and traverse coating deviations. Based on the optimal control algorithm, a traverse coating deviation control was designed. The controller controls the lip profile of the air knives with flexible structure according to the deviation of coating weight. From the measured values which are dependent on the strip width, the lip gaps are calculated with optimal algorithm and the model of the coating deviation. Time delay between knives and a coating thickness gauge is solved by the Smith Predictor.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.224-228
• /
• 2003

In this paper, for phase lock loop(PLL) synthesizer, we introduce a novel but simple and low cost frequency modulation(FM) circuit of a flat peak frequency deviation for modulation signal from high to very low frequency penetrating into the loop-bandwidth of PLL. The FM circuit was basically designed to compensate an amount of feedback of the loop filter in PLL. The circuit also includes the capability of the adjustment of peak frequency deviation and blocking the interference with the loop filter. The designed circuit was successfully implemented and showed the flat frequency deviation as expected in the design.