• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.557-562
• /
• 2004

A surface-piercing barrier model is presented for understanding morphological development in the sheltered region and investigating the main factors causing the severe accumulation. Surface-piercing structures like vertical barriers, surface docks and floating breakwaters are recently favored from the point of view of a marine scenario since they do not in general partition the natural sea. The numerical solutions are compared with experimental data on wave profiles and morphological change rates within a rectangular harbor of a constant depth protected by surface-piercing thin breakwaters as a simplified problem. Our numerical study involves several modules: 1) wave dynamics analyzed by a plane-wave approximation, 2) suspended sediment transport combined with sediment erosion-deposition model, and 3) concurrent morphological changes. Scattering waves are solved by using a plane wave method without inclusion of evanescent modes. Evanescent modes are only considered in predicting the reflection ratio against the vertical barrier and energy losses due to vortex shedding from the lower edge of plate are taken into account. A new relationship to relate the near-bed concentration to the depth-mean concentration is presented by analyzing the vertical structure of concentration. The numerical solutions were also compared with experimental data on morphological changes within a rectangular harbor of constant water depth. Through the numerical experiments, the vortex-induced flow appears to be not ignorable in predicting the morphological changes although the immersion depth of a plate is not deep.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.508-518
• /
• 2008

Reliability and sensitivity analysis of the design parameters for a section of caisson type quaywall which is the most applicable in Korea were performed. It was tried to estimate probabilities of failure for the system of the multiple failure modes and to analyze LCC in the quaywall structure. The reliability analysis was performed by FORM. Also, sensitivity indices were estimated using the reliability indices, which may be used inferring effects of each design parameter on the reliability indices. As a result, the coefficient of friction between caisson and rubble, the moment by self weight and the moment of resistance mostly affected on the reliability indices in the sliding, overturning and foundation failure, respectively. System reliability theorem was applied in order to estimate the probabilities of failure for the system of the multiple failure modes. As the results of estimation of the probabilities of failure for the system, all cases were more conservative than those for the elements, according to both failure mode and load combination applied to series system. It entirely exceeded the target reliability index, but it was consistent with the theorem. According to the optimum LCC with the width of the caisson, the probability of failure exceeded the target probability of failure at then time. Therefore, it was judged to be insufficient to the practical application.

• 전산구조공학
• /
• 제3권1호
• /
• pp.97-107
• /
• 1990

본 연구에서는 쉘구조물의 해석을 위한 개선된 degenerated 쉘유한요소를 제시하였다. 본 연구의 개선된 degenerated 쉘요소는 shear locking 해결에 우수한 결과를 보인 가정된 전단변형도를 사용하고, membrane locking 현상을 제거하기 위해 평면내 변형도의 구성시 감차적분을 행하며, 쉘요소자체의 거동을 보완하기위해 비적합 변위형을 선택적으로 추가하였다. 본 요소는 기존 degenerated 요소계열에서 가장 큰 문제점중의 하나인 locking 현상과 전달가능한 거짓영에너지모드가 발생하지 않으며, 조각시험도 통과한다. 본 개선된 쉘요소의 거동을 알아보기위해 다수의 예제시험을 행하였다. 수치시험결과 본 요소는 빠른 수렴성과 안정성을 보여준다.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.665-688
• /
• 2011

This paper presents a theoretical analysis for the free vibration of rectangular tanks partially filled with an ideal liquid. Wet dynamic displacements of the tanks are approximated by combining the orthogonal polynomials satisfying the boundary conditions, since the rectangular tanks are composed of four rectangular plates. The classical boundary conditions of the tanks at the top and bottom ends are considered, such as clamped, simply supported, and clamped-free boundary conditions. As the facing rectangular plates are assumed to be geometrically and structurally identical, the vibration modes of the facing plates of the tanks can be divided into two categories: symmetric and antisymmetric modes with respect to the planes passing through the center of the tanks and perpendicular to the free liquid surface. The liquid displacement potentials satisfying the Laplace equation and liquid boundary conditions are derived, and the wet dynamic modal functions of a quarter of the tanks can be expanded by the finite Fourier transform for compatibility requirements along the contacting surfaces between the tanks and liquid. An eigenvalue problem is derived using the Rayleigh-Ritz method. Consequently, the wet natural frequencies of the rectangular tanks can be extracted. The proposed analytical method is verified by observing an excellent agreement with three-dimensional finite element analysis results. The effects of the liquid level and boundary condition at the top and bottom edges are investigated.

• 통합자연과학논문집
• /
• 제11권1호
• /
• pp.44-50
• /
• 2018

In this paper, we propose a context-aware power management (CPM) scheme using beacons to reduce the power consumption of personal computers (PCs). In the proposed CPM scheme, the PC, smartphone, control server, and Internet of Things (IoT) device are necessary. PC users first log in the control server using their smartphones and select PCs to turn on. Then, the selected PCs automatically go into three different modes, i.e., sleep, shutdown, and standby power off modes, in order when the PC users leave the PCs without turning off them. Further, we develop a testbed with the proposed CPM scheme using the Arduino with Bluetooth low energy (BLE) and relay modules. Finally, it is shown that the proposed CPM scheme outperforms the conventional scheme in terms of the power consumption.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.352-359
• /
• 2010

In recent years, the market has shown increasing interest in pump-turbines. The prompt availability of pumped storage plants and the benefits to the power system achieved by peak lopping, providing reserve capacity, and rapid response in frequency control are providing a growing advantage. In this context, there is a need to develop pumpturbines that can reliably withstand dynamic operation modes, fast changes of discharge rate by adjusting the variable diffuser vanes, as well as fast changes from pumping to turbine operation. In the first part of the present study, various flow patterns linked to operation of a pump-turbine system are discussed. In this context, pump and turbine modes are presented separately and different load cases are shown in each operating mode. In order to create modern, competitive pump-turbine designs, this study further explains what design challenges should be considered in defining the geometry of a pump-turbine impeller. The second part of the paper describes an innovative, staggered approach to impeller development, applied to a low head pump-turbine project. The first level of the process consists of optimization strategies based on evolutionary algorithms together with 3D in-viscid flow analysis. In the next stage, the hydraulic behavior of both pump mode and turbine mode is evaluated by solving the full 3D Navier-Stokes equations in combination with a robust turbulence model. Finally, the progress in hydraulic design is demonstrated by model test results that show a significant improvement in hydraulic performance compared to an existing reference design.

• Human Ecology Research
• /
• 제56권3호
• /
• pp.263-282
• /
• 2018

This study is used to understand the characteristics of home economics teachers that could to help develop personal development in home economics teacher and home economics education. The questionnaire survey was conducted on 150 home economics teachers who belong to either the home economics teachers' study association or Korean home economics education essociation. The survey was processed with frequency analysis, standard deviations, factor analysis, independent sample t-test, and reliability analysis using SPSS 12.0 depending on the contents of the research. The study results are as follows. First, for home economics teachers' conscious teaching, they build their own identities as experts, and have a vocation and sense of duty for their job. The culture of research and investigation community to study education and to maintain collaborative relationships with teachers of home economics teachers' associations has evolved. Second, home economics teachers have the ability to analyze and manage students' demands in order to perform teaching activities, and understand individual student characteristics. They understand new study trends and curriculum, develop sources for class, use appropriate teaching and learning theories, and create students' reflective activities. In addition, they grow their learning ability as specialist and study in self-oriented ways.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.329-338
• /
• 2013

In this paper, the charging characteristics of series resonant type high voltage capacitor chargers considering the transformer stray capacitance have been studied. The principles of operation for the four operational modes and the mode changes for the four different switching frequency sections are explained and analyzed in the range of switching frequency below the resonant frequency. It is confirmed that the average charging currents derived from the above analysis results have non-linear characteristics in each of the four modes. The resonant current, resonant voltage, charging current, and charging time of this capacitor charger as variations of the switching frequency, series parallel capacitance ratio ($k=C_p/C_s$), and output voltage are calculated. From the calculation results, the advantages and disadvantages arising from the parallel connection of this stray capacitance are described. Some methods to minimize charging time of this capacitor charger are suggested. In addition, the results of a comparative test using two transformers whose stray capacitances are different are described. A 1.8 kJ/s prototype capacitor charger is assembled with a TI28335 DSP controller and a 40 kJ, 7 kV capacitor. The analysis results are verified by the experiment.

• 한국가스학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 2003

본 연구에서는 이미 개발되어 있는 부식결함의 잔존강도를 평가식을 이용하여 파단, 대누출, 소누출의 손상모드 예측하는 절차를 제시하였다. 또한 이 손상모드에 따라 손상확률을 예측할 수 있는 방법을 제시하고 여기에 부식속도 정보를 결합하면 일정기간 경과 후 손상확률도 예측할 수 있음을 보였다. 이 결과는 노후배관의 수명 또는 교체주기의 예측에 매우 유용하게 활용될 수 있을 것이라 판단된다.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.237-247
• /
• 2020

Shear connectors are essential elements in the design of steel-concrete composite systems. These connectors are utilized to prevent the occurrence of potential slips at the interface of steel and concrete. The two types of shear connectors which have been recently employed in construction projects are C- and L-shaped connectors. In the current study, the behavior of C and L-shaped angle shear connectors is investigated experimentally. For this purpose, eight push-out tests were composed and subjected to monotonic loading. The load-slip curves and failure modes have been determined. Also, the shear strength of the connectors has been compared with previously developed relationships. Two failure modes of shear connectors were observed: 1) concrete crushing-splitting and 2) shear connector fracture. It was found that the L-shaped connectors have less shear strength compared to C-shaped connectors, and decreasing the angle leg size increases the shear strength of the C-shaped connectors, but decreases the relative ductility and strength of L-shaped connectors.