• 디지털융복합연구
• /
• 제9권6호
• /
• pp.389-397
• /
• 2011

로봇 교육이 갖는 교육적 효과에 대한 인식의 확산에 따라 교육용 로봇을 이용한 교육을 실시하는 곳이 점진적으로 증가하고 있다. 그러나 현재 실시되고 있는 대다수의 교육현장은 일반 학생들에게 초점이 맞추어져 있다. 따라서 본 연구는 장애 학생들에게도 로봇활용 교육의 장점을 살려서 교육이 이뤄지기를 기대할 수 있도록 그들을 가르칠 예비 특수교사들을 위한 로봇활용교육 프로그램을 개발하였다. 본 논문을 통하여 로봇활용교육이 특수교육에서 필요한 분야라는 결과를 도출하였고, 이를 위한 제언을 통하여 특수교육현장 에서 로봇활용교육을 할 수 있도록 강조하였다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.689-702
• /
• 2019

This paper deals with the verification of the functions about mining robot, which is the system for developing deep seabed resources by applying V&V(verification and validation). In order to overcome water pressure of 500 bar and to travel on soft ground, and to operate in deep sea environment with bad conditions, it is necessary to develop a robot that can satisfy various deepsea conditions. A mining robot has been developed based on simulation based design and Multidisciplinary design optimization. In order to verify the developed robot, lab test and real sea test should be performed for various marine environment conditions. There are too many requirements to consider, such as space, time, cost, personnel, and environment to do performance test. So it is costly and time consuming for developing robot. In order to solve this problems, V&V technique was applied to mining robot. The stages of mining robot design, fabrication and commission were verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1866-1870
• /
• 2005

Typical small desktop robots have limied application due to their intrinsic feaures like friction, backlash, etc. However, a newly developed small gantry desktop robot needs smaller footprint and shows better performance in position accuracy, velocity, and acceleration. In order to achieve such results, synchronization control of two axes, position compensation methods in plane are suggested.

• 로봇학회논문지
• /
• 제13권3호
• /
• pp.157-163
• /
• 2018

This paper deals with the development and application of control algorithms for series elastic relief robots for rescue operations in harsh environment like disasters or battlefield. The joint controller applied in this paper has a cascade structure combining inner loop for torque control and outer loop for position control. The torque loop contains feedforward and feedback controller and disturbance observer for independent, decentralized joint control. The effect of the elastic component and motor dynamics are treated as the nonlinear disturbance and compensated with the disturbance observer of torque controller. For the collision detection, Band Designed Disturbance Observer is configured to recognize/respond to external disturbance robustly in the continuously changing environment. The controller is applied to a 7-dof series elastic manipulator to evaluate the torque tracking and collision detection/response performance.

• 공학교육연구
• /
• 제18권6호
• /
• pp.38-45
• /
• 2015

This study aims to conduct a case study of the Science, Technology, Engineering, Arts, and Mathematics (STEAM) outreach program development and their application. This program was operated by 184 middle and high school students at C University on October 2014. The major results of these studies were as follows: First, The theme of the outreach program consisted of four engineering areas, aerospace engineering, chemical engineering, architectural engineering, and mechatronics (robot) engineering; moreover, the materials for the students' workbook, the guidebook for teachers, and the program operation manual for staffs in a university were developed by working with four authors and ten subject matter experts. Second, the satisfaction level with the contents and activities was ranged from 4.24-4.31 out of 5 points. Third, the vitalizing activation plan was discussed for the sustainable development and operation of the STEAM outreach program.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.10-18
• /
• 1997

This paper presents the development of real-time estimation and control details for a computer vision-based robot control method. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes know 4-axis Scorbot manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method. The method is tested experimentally in two ways : First the validity of estimation model is tested by using the self-built test model. Second, the practicality of the presented control method is verified in performing 4-axis manipulator's assembly task. These results show that control scheme used is precise and robust. This feature can open the door to a range of application of multi-axis robot such as deburring and welding.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1525-1529
• /
• 2004

Most of the recently developed robots are human friendly robots which imitate an animal or human such as entertainment robot, bio-mimetic robot and humanoid robot. Interest in these robots are increasing since the social trend is focused on health, welfare, and graying. By these social backgrounds, robots become more human friendly and suitable for home or personal environment. The more bio-mimetic robots resemble living creature, the more human feels familiarity. People feel close friendship not only when they feed a pet, but also when they watch a pet having the food. Most of entertainment robots and pet robots use internal-type batteries and have a self-recharging function. Entertainment robots and pet robots with internal-type batteries are not able to operate during charging the battery. So far there have been a few robots that do not depend on a battery. However, they need a bulky energy conversion unit and a slug or foods as an energy source, which is not suitable for home or personal application. In this paper, we introduce a new bio-mimetic entertainment robot with autonomous feeding functionality, called ELIRO-1(Eating LIzard RObot version 1). The ELIRO-1 is able to find a food (a small battery), feed by itself and evacuate. We describe the design concept of the autonomous feeding mechanism of the ELIRO-1, characteristics of sub-parts of the manufactured mechanism and the control system.

• 실천공학교육논문지
• /
• 제7권2호
• /
• pp.97-105
• /
• 2015

본 논문은 PBL 기반 프로그래밍 교육방법에 기초하여 피지컬 컴퓨팅 내용을 중심 학습 요소로 선정하였다. 본 논문에서는 아두이노를 활용한 피지컬 컴퓨팅 내용을 개발하고 로봇 프로그래밍 교육 발전에 걸림돌로 작용하는 과도한 비용 문제나 시간적, 공간적 제약과 같은 환경적 여건의 부족 문제를 해소하기 위한, 아두이노 교육 프로그램을 제안한다. 그리고 실험 수업을 통해 교육 현장에 적용함으로써 논리적 사고력과 문제해결력에 미치는 영향을 검증하였다.

• 정보교육학회논문지
• /
• 제15권4호
• /
• pp.533-542
• /
• 2011

본 논문은 PBL 기반 프로그래밍 교육방법에 기초하여 라인트레이서의 주행 알고리즘을 중심 학습 요소로 선정하였다. 본 논문에서는 스크래치 웹 코스웨어를 개발하여 로봇 프로그래밍 교육 발전에 걸림돌로 작용하는 과도한 비용 문제나 시간적, 공간적인 제약과 같은 환경적 여건의 부족 문제를 해소하기 위해, 라인트레이서 동작 시뮬레이션 스크래치 프로그램 및 교육 프로그램을 제안하였다. 그리고 실험 수업을 통해 초등 교육 현장에 적용함으로써 논리적 사고력과 문제 해결력에 미치는 영향을 검증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권1호
• /
• pp.217-224
• /
• 2019

The intelligent robot industry is a complex which encompasses all fields of science and technology, and its marketability and industrial impact are remarkable. Major countries in the world have been strengthening their policies to foster the intelligent robot industry, but discussions on liability issues and legal actions that are accompanied by the related big or small accidents are still insufficient. In this study, therefore, the patent law by artificial intelligence robots and the legislation for relevant legal actions at the criminal law level are presented. Patent law legislation by artificial intelligence robots should comply with the followings. First, the electronic human being other than humans ought to be given legal personality, which is the subject of patent infringement. Even if artificial intelligence has legal personality, legal responsibility will be varied depending on the judgment of whether the accident has occurred due to the malfunction of the artificial intelligence itself or due to the human intervention with malicious intention. Second, artificial intelligence as a subject of actors and responsibility should be distinguished strictly; in other words, the injunction is the responsibility of the intelligent robot itself, but the financial repayment is the responsibility of the owner. In the criminal law legislation, regulations for legal punishment of intelligent robot manufacturing companies and manufacturers should be prepared promptly in case of legal violation, by amending the scope of application of Article 47 (Penal Provisions) of the Intelligent Robots Development and Distribution Promotion Act. In this way, joint penal provisions, which can clearly distinguish the responsibilities of the related parties, should be established to contribute to the development of the fourth industrial revolution.