• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.02a
• /
• pp.36-47
• /
• 1999

Terzaghi's theory of one-dimensional consolidation is restricted in its applicability to relatively thin layers and small incremental loading. Because it is assumed to infinitesimal strain and linear material function. For this reason, Gibson et al established a rigorous formulation for the one-dimensional nonlinear finite strain consolidation theory. There are some difficulties in the application of finite strain consolidation theory. The developed program consisted of several forms and modules. These forms and modules with graphic-user-interfaced format are used in analysis of consolidation practices. For the purpose of verification of developed program. the results of case study and prediction of developed program are compared. The results of comparison is fairly well with prediction and measured data. And with varying finite strain consolidation parameter, g(e) or λ(e), the sensitivity of predicted values were examined.

• Korean Journal of Oriental Medicine
• /
• v.15 no.1
• /
• pp.63-68
• /
• 2009

In Sasang Constitution Medicine (SCM), it is most important that a personal SCM type is determined accurately ahead of applying any Sasang treatments. Although SCM doctors have districted personal SCM types in many hospitals and universities via their own discriminant, it still lacks objective criteria on diagnosis of SCM type. Therefore, many researchers have been studied to diagnose the SCM type using constitutional clinical data. Previous work, we have developed decision tree program to analyze the clinical information. In this paper, we developed a clinical index program based on the web to analyze the correlation among clinical information. Finally, we identified useful factors(4 clinical indexes) which have significant influence on SCM types using clinical index program with previously developed decision tree program.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.614-619
• /
• 1988

In this paper, an arbitrary mission of a spacecraft from launch to orbit injection is investigated for some launch trajectories. Launch sites are selected arbitrarily from various locations in Korea. For this study, a general purpose simulation program is developed. In this program, the Earth is assumed to be a rotating ellipsold. The launch vehicle is treated as a 3-D, 6-DOF rigid body. The developed program has been evaluated by calibrating it to the 3-stage N-1 rocket developed in Japan and launched at Tanegasima. The simulated trajectory from the first-stage ignition to burnout of third-stage main engine is compared with the previously tested N-1 rocket trajectory in Japan. The result shows that the program works properly. Using the proven program, we have investigated possible launch locations in Korea, namely Marado, Sungsan and Kuryongpo. The problem of polar orbit injection is also examined.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.414-418
• /
• 1986

Although the use of NC machine is increasing in modern industry, unfamiliarities of the NC program syntax do not allow us to program it easily. So, automatic programming systems, such as APT, COMPACT, CL, were developed to help the uninitiated to write NC program easily. In this research, Korean Automatic Programming System for 2-axis NC lathe is developed, by which NC program is easily programmed using Korean letters. In addition, Graphic Debugger for 2-axis NC lathe is developed for debugging the NC program error and animating the cutting process. The above systems are run on the IBM-PC/XT.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.348-355
• /
• 2001

A computer program named \"NLDA-BIS\", which runs under the MATLAB environment, is developed fur seismic response analysis of base isolated structures. This program can explicitly model the various nonlinear isolation elements such as elastomeric bearings, sliding bearings and general viscous dampers, and so on. Newmark'\`s constant average acceleration method fur calculating the responses in time domain and the iterative pseudo-force method for treating the nonlinear isolation forces are adopted. For capturing the hysteretic behavior of isolation elements, the modified Wen's equations are adopted and solved by the numerical differentiation formula method. To verify the validity of the developed program, the seismic responses of a six-story reinforced concrete base isolated structure are calculated and compared with results obtained by the program \"3D-BASIS\" developed at the State University of New York at Buffalo which is the most widely used code far analyzing isolated structures today.ed structures today.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.1
• /
• pp.29-35
• /
• 2002

A simulation program for vehicle dynamic analysis was developed. The Cartesisn coordinate system was used for translational motion and the Euler angle system was used for rotational motion. A three dimensional multi-wheeled vehicle model and equations of motion were derived. Also static equilibrium analysis was added for initial vehicle condition setting. The program user can describe the exact characteristics of suspension spring force and damping force in the user subroutine. A wheel-ground contact model which represents geometrical effect was developed. Two cases of simulation for 16 D.O.F. vehicle model were conducted to validate the developed program by comparing the simulation results with the experimental data.

• Hwankyungkyoyuk
• /
• v.13 no.2
• /
• pp.91-102
• /
• 2000

National curriculum for environmental education recommends various teaching-learning methods including survey and discussion of environmental problems, investigation of case studies, experiments, role play, and field-experience learning in addition to the traditional lecture-oriented teaching methods. The field experience learning in environmental education is considered to be a good method to develop environmentally sound attitude and to cultivate environmental sensitivity, but here has been very limited research concerning models for field-experience learning. The aim of this study is to develop a model of the field-experience learning program of environmental education utilizing environmental facilities. In this study a kind of such a basic model was developed and presented. The developed basic model of the field-experience learning was applied to the case utilizing landfill facilities. A specific application of the landfill program to the Bangcheon-ri landfill, in Daegu, was also presented with related teaching materials developed in this studies. And various aspects in the program was discussed.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.11-23
• /
• 1995

The CAD/CAM system for the manufacturing automation is the newest technology in mechanical engineering area and becomes the important research subject nowadays. Most of all hardwares and softwares for the CAD/CAM system used in the our manufacturing companies such as automobile company are developed by the foreign country and the purchasing price of them is very expensive but their applicability to a certain area is very limited. This study was conducted to develope a CAD/CAM system for the design and the automatic manufacturing of the iron pattern shaped with 3 - dimensional free curved surface, and to test its applicability to the design and the manufacturing of the rotary blade. The results obtained from the study are as follow; 1. The CAD system which can process graphic procedures from the free curved surface shaped data was developed with personal computer. 2. The CAM main program was developed. This main program could produce CL data from CAD data file by checking the tool interference according to the cutting mode. 3. The sub. program which can simulate the tool trace from the CL data was developed. 4. The post processor for the Deckel FP2NC NC milling machine from CL data file was developed and the sub program could transmit NC program through modem to NC milling machine was developed. 5. The developed CAM system seemed to be applicable to any other system. Because the measuring results of the cross sectional thickness of the plastic model from the manufacturing iron pattern by the system showed that this system could properly check the tool interference. 6. In took 75~90 hours to manufacture two iron patterns of rotary blade. For the sake of convenience in applying to the other systems, this system was developed in BASIC and FORTRAN computer language and minimum portion of machine language as possible.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.125-130
• /
• 2004

As an application of GPS is increased by world geodetic system introduction gradually, in this time, It is increased necessary of GPS baseline analysis program development. In this study, I developed a baseline analysis program by L1/L2 carrier. And I compared a baseline analysis result with a commercial program. I showed precision of approximately ${\pm}$1cm in a baseline length in case of Narrow lane as a result that a baseline analysised a developed program.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.283-285
• /
• 2006

Non Destructive Examination for welds is one of the most important processes to ensure the integrity of facilities of Nuclear power plants. An automated ultrasonic testing program is developed for welding inspection. A test block with side EDM notch is inspected with this program. This paper shows that the developed automated ultrasonic testing program is quite effective.