• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.379-385
• /
• 2010

The purpose of this study was to examine the oral health knowledge and oral health practice of teachers in early childhood education institutions. The subjects in this study were 169 teachers who worked in early childhood education institutions. After a survey was conducted, the collected data were analyzed with a SPSSWIN 14.0 program. The findings of the study were as follows: 1. Concerning oral health knowledge, they got a mean of 7.97(9), 2.66(3), 2.86(5), 2.42(5) and 1.04(2) respectively in knowledge on dental caries, toothbrushing, periodontitis, fluoride and diet. Overall, they got a mean of 16.98 in 24 items, and the score corresponded to approximately 70 out of 100 points. 2. As for oral health practice, tongue cleaning(4.22) was what they did the most to take care of their oral health, and they just got 2.60 in regular dental checkup. Overall, they got about 3.11 in oral health practice. 3. Regarding relationship between general characteristics and oral health knowledge, the teachers who were in their 30s got 17.47 in overall oral health knowledge, and those with a career of five to less than 10 years got 17.50. The teachers who received college or higher education got 17.27, and the principals got 18.26. Those who had ever received education on oral health got 17.01. But the gaps between them and the others were not statistically significant. 4. As to connections between general characteristics including age and oral health practice, restricted sugar intake, regular dental checkup, the use of oral hygiene supplies, tongue cleaning and overall oral health practice were more prevailing among the older teachers, and the gaps between them and the younger teachers were statistically significant. 5. In terms of relationship between oral health knowledge and oral health practice, there was no statistically significant relationship between the two on the whole, but better oral health knowledge led to better oral health practice in each part. This study shows that various oral health education programs for the kindergarten teachers should be developed and continuous education through the programs is important to improve the knowledge of oral health and to change oral health behavior.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.193-202
• /
• 2012

'Joseong', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2010. The cultivar 'Joseong' was selected from the cross FAHAD_5/RHINO1R.1D 5+10 5D'5B'//FAHAD_5 by CIMMYT (Mexico) in 1992. Subsequent generations were handled in pedigree selection program at Mexico from 1993 to 1998, and a line 'CTSS92Y-A-4Y-0M-5Y-0B' was selected for earliness and good agronomic characteristics. After preliminary and advance yield test in Korea for 2 years, the line designated as a line name of 'Iksan26'. The 'Iksan26' was subsequently evaluated for earliness and forage yield in 7 different locations such as Jeju, Iksan, Cheongwon, Yesan, Naju, Daegu, and Jinju from 2008 to 2010 and finally named as 'Joseong'. The cultivar 'Joseong' has characteristics of dark green leaf, yellow culm and spike, and large grain of yellowish brown color. The heading date of cultivar 'Joseong' was April 24, which was 5 days earlier than that of check cultivar 'Shinyoung'. It showed better tolerance or resistance to lodging, wet injury, powdery mildew, and leaf rust than those of the check cultivar 'Shinyoung'. The average forage dry matter yield of cultivar 'Joseong' at milk-ripe stage was 14.5 MT $ha^{-1}$, which was lower than 16.5 MT $ha^{-1}$ of the check cultivar 'Shinyoung'. The silage quality of 'Joseong' (5.3%) was lower to the check cultivar 'Shinyoung' (6.0%) in crude protein content, while was 2.1% superior to the check cultivar 'Shinyoung' (61.9%) in TDN (total digestible nutrients). It showed 5.1 MT $ha^{-1}$ of grain yield, which was 40% higher than that of the check cultivar 'Shinyoung' (3.65 MT $ha^{-1}$). This cultivar is recommended for fall sowing crop in the area where daily minimum mean temperatures are averaged higher than $-10^{\circ}C$ in January, and as a winter crop using whole crop forage before planting rice in around Korea.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1295-1306
• /
• 2012

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater and identified as Bacillus atrophaeus. This species was designated as B. atrophaeus LBH-18 based on its evolutionary distance and the phylogenetic tree resulting from 16S rDNA sequencing and the neighbor-joining method. The optimal conditions for rice bran (68.1 g/l), peptone (9.1 g/l), and initial pH (7.0) of the medium for cell growth was determined by Design Expert Software based on the response surface method; conditions for production of CMCase were 55.2 g/l, 6.6 g/l, and 7.1, respectively. The optimal temperature for cell growth and the production of CMCase by B. atrophaeus LBH-18 was $30^{\circ}C$. The optimal conditions of agitation speed and aeration rate for cell growth in a 7-l bioreactor were 324 rpm and 0.9 vvm, respectively, whereas those for production of CMCase were 343 rpm and 0.6 vvm, respectively. The optimal inner pressure for cell growth and production of CMCase in a 100-l bioreactor was 0.06 MPa. Maximal production of CMCase under optimal conditions in a 100-l bioreactor was 127.5 U/ml, which was 1.32 times higher than that without an inner pressure. In this study, rice bran was developed as a carbon source for industrial scale production of CMCase by B. atrophaeus LBH-18. Reduced time for the production of CMCase from 7 to 10 days to 3 days by using a bacterial strain with submerged fermentation also resulted in increased productivity of CMCase and a decrease in its production cost.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.419-426
• /
• 2009

Purpose : The aim of this study was to evaluate the difference of bone mineral density according to distal radius rotation and to develop the supporting tool to measure rotation angles. Materials and Methods : CT scanning and the measurement of BMD by DXA of the appropriate position of the forearm were performed on 20 males. Twenty healthy volunteers without any history of operations, anomalies, or trauma were enrolled. The CT scan was used to evaluate the cross sectional structure and the rotation angle on the horizontal plane of the distal radius. The rotational angle was measured by the m-view program on the PACS monitor. The DXA was used in 20 dried radii of cadaveric specimens in pronation and supination with five and ten degrees, respectively, including a neutral position (zero degrees) to evaluate the changes of BMD according to the rotation. Results : The mean rotation angle of the distal radius on CT was 7.4 degrees of supination in 16 cases (80%), 3.3 degrees of pronation in three cases (15%), and zero degree of neutral in one case (9%), respectively. The total average rotation angle in 20 people was 5.4 degrees of supination. In the cadaveric study, the BMD of the distal radius was different according to the rotational angles. The lowest BMD was obtained at 3.3 degrees of supination. Conclusion : In the case of the measurement of BMD in the distal radius with a neutral position, the rotational angle of the distal radius is close to supination. Pronation is needed for the constant measurement of BMD in the distal radius with the rotation angle measuring at the lowest BMD and about five degrees of pronation of the distal radius is recommended.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.309-325
• /
• 2004

The Cannington Ag-Pb-Zn deposit, northwest Queensland, Australia developed around the host rocks composing banded and migmatitic gneisses, sillimanite-garnet schist and amphibolite. Three crystal habits of sillimanite, gahnite (Zn-spinel) and garnet porphyroblasts occurred on the host rocks of the Cannington deposit could be used to delineate metamorphism that closely associated with Zn-mineralization in the deposit. Linkages the metamorphism to Zinc-mineralization is determined in four chemical systems, KFMASH (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$), KFMASHTO (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$-TiO$_2$-Fe$_2$O$_3$), NCKFMASH (Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$) and MnNCK-FMASH (MnO-Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$), using THERMOCALC program (version 3.1; Powell and Holland 1988). Partial melting in MnNCKFMASH and NCKFMASH systems occurs at lower temperature than in the KFMASH and KFMASHTO systems. The partial melting temperature decreases with increasing of Na/(Na+Ca+K) of the bulk rock compositions in the MnNCKFMASH system. The host rocks have melted ca 15 vol.% in the MnNCKFMASH system at peak metamorphic conditions (634$\pm$62$^{\circ}C$ and 4.8$\pm$1.3 kbar), but partial melting have not occurred in KFMASHTO system. Based on calculations of sillimanite isograd in different systems and sillimanite modal pro-portion, prismatic and rhombic sillimanite and gahnite porphyroblasts including prismatic sillimanite inclusion probably have resulted from pressure and temperature increasing through partial melting (from 550～$600^{\circ}C$, 2.0～3.0 kbar to 700～75$0^{\circ}C$, 5.0～7.0 kbar), furthermore have experienced N-S then W-E crustal shortening during D$_1$ and D$_2$ deformation. Consequently, Zinc mineralization related to gahnite growth occurred during D$_2$ and was redistributed and upgraded by partial melting and retrograde metamorphism into structural and rheological sites during shearing in D$_3$.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.135-155
• /
• 1998

The purpose of this study is to evaluate the environmental sustainability of new town development in metropolitan area, Korea and derive some policy implications for sustainable urban development. The case study area selected for empirical research is Jisan Bummul new town in Taegu. In the part of theoretical review, it is considered that the urban form suitable to sustainable development of a metropolis is the type of decentralized concentration. For the decentralized concentration form, we suggest developing suburban centers with self-sufficiency within a metropolis. This strategy is to develop a few suburban centers on the outskirts of a metropolis to decentralize urban activities of the central city, and to conserve the remaining. The empirical study evaluating the environmental sustainability of new town development shows that Jisan Bummul new town generally have low environmental sustain ability, because of the policy of mass housing provisions without consideration on overall natural conditions and environmental capacity of the area. To develop a new town. we must first select the locational site with minimum possibility of the destruction of natural environment, and then it is necessary to develop new towns into compact form to minimize the destruction of the natural environment. Second, a new town should be developed into a large scale to obtain urban self-sufficiency. Third plans must be established for decentralising both industrial and residential functions of a metropolis simultaneously. As more detailed policy implications, it is suggested that the policies are needed to improve the quality of educational conditions and enhance the level of services of public transport facilities. It is also necessary to establish the comprehensive development plan that takes the adjacent developmental area into consideration, and to prepare various action plans to bring up the facilities of self-sufficiency. In the selection of the location of a new town, the adaptability of public transportation planning must be emphasized. But, to take a program for short-term mass housing provisions must be restricted.

• Journal of Science Education
• /
• v.40 no.2
• /
• pp.166-188
• /
• 2016

The purpose of this study was to analyze the utilization of history of science and STEAM and the elementary school teachers' perceptions about design-based STEAM instruction applying the history of science in science class. To research the utilization of the history of science and STEAM in elementary science class, educational value of design-based STEAM instruction applying the history of science, the questionnaire was revised based on research conducted by Lee & Shin(2014), Park et al.(2010), Shin & Han(2011) and developed questionnaire a total of 20 questions. It was administered to reply the questionnaire to 201 teachers of elementary school in D and G area. The results of this study were as follows: elementary school teachers did not teach actively the history of science, made it read students by simply introducing himself. They did not teach actively STEAM due to not enough time(busy to take a magnitude). They were difficult to teach, but the most focused on the 'Creative Problem-solving' process. And elementary school teachers perceived positively about the educational value of design-based STEAM instruction applying the history of science. Especially, they perceived that it can help elementary school students find a hint for solving the problem through examples of cases of scientific principles and a scientist. In conclusion, it implicates that it is need to regard elementary school teachers' perceptions on application of the history of science and STEAM, and develop specific design-based STEAM program applying the history of science in order to be applied successfully in elementary school for the STEAM settlement.

• Archives of design research
• /
• v.17 no.1
• /
• pp.89-98
• /
• 2004

A systemic approach to behavior on the basis of human psychology is needed for behavior-centered space design. Also, the recognition that human and environment, in all, have complementarity is needed- human and space shall be understood as a general phenomenon, supposing interaction. Design of behavior-oriented space means configuration and coordination of physical subjects as well as understanding, analysis and reflection of psychological and behavioral phenomena. It is analysis of a private individual as well as understanding of interaction between human groups, as well. In respect of space recognition, analysis not on material movement but on energy circulation and variable is important. It means that the understanding of user's behavior and psychology does not orient reasonable purpose just for convenience. That is, such understanding intends to understand behavioral patterns and psychological phenomena between space and human beyond the decomposition of structure of human and space into physical elements and the design based on standardized data. Thereby, more human-oriented space design might be implemented by the understanding of behavioral essence. Also, a user-centered design process from another viewpoint might be created, and the general amenity among man, space and environment - better environmental quality - might be produced. For this, the consciousness of human activity that is, activity system shall be ahead of it, and the approaches for design shall be implemented into a process not in predictive ideas but in semi-scientific system. On the basis of the above view, this study was attempted to investigate the orientation of design to recognize space as another life, and explore a process where it is drawn into a design language on the basis of human behavior. If the essence of space behavior and the activity system are analyzed through user observation and it is reflected upon a space design program and then developed into a formative language, a new design process on human and environment might be produced. In conclusion, the reflection of user's behavior and psychology into design, contrary to existing public space design based on physical data, can orient quality improvement of human life and ultimately be helpful to the proposition, 'humanization of space'.