• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2860-2867
• /
• 2015

Stable channel design is to determine the width, depth and slope for satisfying the condition that the upstream incoming sediment rate is equal to the sediment transport rate at the design channel. Therefore, the most sensitive variable when designing a stable channel is the selection of a sediment transport equation applied for the channel design. Especially if in the case of gravel beds the designer uses the equation developed by using the data of sand rivers, the calculation result of the stable channel section has large errors. In this study, the stable channel design has been applied to the gravel bed river using the previous stable channel design program with newly added the sediment transport equation for gravel beds; and the stable channel section considering design constraints has been produced by using the analytical method. As results, in the case of the application with the fixed width, the depth predicted by Ackers and White's equation was the shallowest and Meyer-Peter and $M\ddot{u}ller's$ equation was 0.8 m deeper than the current section of 2.4 m. In the case of the application with the fixed depth, the width predicted by Engelund and Hansen's equation was twice wider than the current section and by Meyer-Peter and $M\ddot{u}ller's$ equation was 20 m wider than the current section of 44 m.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.699-711
• /
• 2003

Home networking and Internet control technologies must satisfy three requirements with a view to being applied to home for raising the qualify of human life. Firstly, the cost of adding home networking ability to the traditional appliance must be minimized. Secondly, the mutual accessibility between home network and Internet must be guaranteed in the various Internet service environment of home. Finally, communication must be possible between the home network and the Internet that use different communications protocols. This paper proposes the ARCS (Appliance Remote Control System) that controls appliances based on LnCP (Living network Control Protocol) via the Internet. LnCP is the most cost-effective network and control protocol for home network. ARCS guarantees the accessibility from the Internet to home network and provides users with the virtual interface designed for controlling appliances using the Internet application program. In addition, this paper proposes AICS (Appliance Internet Control Specification). AICS, is based on LnCP, defines the message structure and control commands for the Internet control communication. ARCS and home gateway are developed to meet AICS.

• Smart Media Journal
• /
• v.4 no.4
• /
• pp.120-129
• /
• 2015

Explosion effect on CG (Computer Graphic) a visual effect on which a higher degree of technological difficulty is required with a variety of effect elements such as Fire, Smoke, Flame, Dust, Debris, etc. integrated on it. As skills for CG software have been advanced, solutions loaded with functions of various fluid simulation have been developed. So more realistic special effects came to be available. However, in Korea, it depends just on CG program functions. Besides, enough R&D's concerned have not been followed up. Accordingly, this study is aimed at offering a production method that may effectively implement more realistic explosion effects under experimentations. To begin with, the study derives problems through a precedent study of the implementation of existing explosion effects. Then to solve them, experimental studies are performed depending on four solutions. There are accesses to the four solutions: first, Numerous Turbulent Flow, a method to allow an attribute of turbulent air in the stage of fluid simulation; second, Cache Retiming Solution produced in script; third, Multiple Volume Container based on cached data; and fourth, RGB Lighting Pipeline, a method to enhance the completion of the result from the stage of composition. Characteristics of effects applied in each stage and consecutive connections of them proved the effective implementation of more realistic explosion effects. This study may not only suppose the production method for efficient explosion effects differentiated from the previous ones but also be utilized as basic data for relevant researches.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.211-216
• /
• 2007

The quality of tap water on the whole water-supply system, from a large filtration plant to a private faucet, has to be guaranteed the standards of drinking water. At this point in time, however, the supply process of the tap water has not been monitored and managed scientifically. The piped water, especially the most small-scale reservoirs(underground or overhead type) are always exposed to various contaminations and impurities. Recently monitoring systems of water-quality were spread on some large filtration plants or distributing reservoirs. In particular, the water quality monitoring method using the internet is adopted into some local government whose inhabitants can check up the water quality anytime and anywhere. The construction of this system that has to apply a large scale needs, and has a limitation on the small water-supply system, such as apartments, public facilities and small-scale underground or overhead reservoirs. In this work, we suggest the integration system of individual water-quality sensor modules that have a low price. By using the developed integration system and monitoring program operated on the internet, the system managers of reservoirs can monitor and manage water-quality characteristic values of drinking water in online. Since the proposed system was modularized, the system can be applied easily into various reservoirs with a low cost and regardless of its scale, small or large.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.220-232
• /
• 2012

In this paper, we investigate the correlation result due to the problems of delay tracking and fringe rotation module in the VCS(VLBI Correlation Subsystem). The VCS, FX-type correlator, adopts the delay tracking and fringe rotation module in order to compensate the delay change and fringe phase of wave signal from the radio source by Doppler's effect. The phase of observed data is also compensated by means of delay tracking and fringe rotation in the correlator, but we confirmed that the phase is unstable by applying long integration period of AIPS(Astronomical Image Processing System) rather than correlator. And the delay value of observed data has the errors of several tens nanoseconds than normal case at the analysis of correlation result. In addition, we found that the phase of correlation results is not connected as the unit of FFT-segment because the initial fringe phase at the fringe rotation module is not correctly determined. In this paper, in order to solve these problems, the original direction of 90 degree phase jump is reversely modified when the bit-shift occurred at the delay tracking. And the initial fringe phase at the fringe rotation module is correctly modified by using the initial phase of observed data. In addition, the parameter calculation module was abnormally operated as designed in the fringe rotation. So, the logical program by the VCS is modified so as to calculate the parameters correctly. Through the experiments of correlation processing over the above problems, the modified proposal algorithm is adequately corrected to the data analysis results, so that the experimental results make it clear for us to operate the developed VCS hardware correlator normally.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.23-30
• /
• 2009

Crash cushions are protective devices that prevent errant vehicles from impacting on fixed objects. This function is accomplished by gradually decelerating a vehicle to a safe stop in a relatively short distance. Commonly used crash cushions generally employ one of two concepts to accomplish this function. The first concept involves the absorption of the kinetic energy of a moving vehicle by crushable or plastically deformable materials and the other one involves the transfer of the momentum of a moving vehicle to an expendable mass of material located in the vehicle's path. Crash cushions using the first concept are generally referred to as compression crash cushions and crash cushions using the other concept are generally referred to as inertial crash cushion. The objective of this research is the development of a compression-type crash cushion by employing the two concepts simultaneously. To minimize the number of full-scale crash tests for the development of the crash cushion, preliminary design guide considering inertial and frictional energy absorption was constructed and computer simulation was performed. LS-DYNA program, which is most widely used to analyze roadside safety features, was used for the computer simulation. The developed crash cushion satisfied the safety evaluation criteria for various impact conditions of CC2 performance level in the Korean design guide.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.

• Journal of Engineering Education Research
• /
• v.10 no.1
• /
• pp.77-85
• /
• 2007

Though accreditation demands considerable ongoing effort on the part of the college, about 10 percent of Korean engineering colleges has been accredited for 5years by ABEEK. It is true that engineering accreditation contributed the Korean engineering education to improve. Many engineering colleges which had prepared the engineering accreditation developed the integrating system for the engineering education, and over 50 engineering education research centers which assisted to programs in accreditation were founded. Also the faculty commitment to quality programs and excellence in teaching, continuous counseling for students, portfolio guiding and continuous quality improvement(CQI) etc. were performed for accreditation preparation. The engineering colleges preparing accreditation has made efforts for satisfying accreditation criteria, but it is difficult of modifying education systems which have been maintained by now. In addition, engineering colleges need guideline how to satisfy standards. The purpose of this study is to analyze draft statement of 4 universities which were evaluated in 2006 and to suggest the minimal resources for engineering colleges to prepare accreditation.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.95-120
• /
• 2011

Modern society is the age of the information. As new information is springing up every day and pace of change becomes faster, the importance of communication skills is growing. The recent mathematics education is recognized as not a fragmentary mathematical knowledge or results of the learning, but a procedure of mathematical thinking, and the effective expression skill of their mathematical ideas and the ability to forward it to others are regarded very serious. As the method of mathematics evaluation, mathematical essay is introduced to replace the existing multiple-choice written test. This method assess the ability which students have, that express the reorganized knowledge and information according to given situation by themselves. Ultimately, it is expected to help that students get the higher order thinking skills such as logical thinking and creativity. However, definition of elementary mathematical essay is unclear, and proper teaching methods is lacking for each stage of elementary school students. Thus, in this paper, I have defined the concept of elementary mathematical essay and made a foundation of elementary mathematical essay research, then researched about the effective utilization of elementary mathematical essay using school education. Also elementary mathematical essay teaching-learning materials is developed and applied to analyzed the students' responses. Using this program, in real elementary school education, the implications has deduced.

• Journal of Elementary Mathematics Education in Korea
• /
• v.17 no.2
• /
• pp.265-283
• /
• 2013

This research puts the purpose in examining the general trend of mathematics underachievers in the elementary school based on the analysis results of mathematics diagnostic assessment of mathematics underachievers and the recognition of teachers and students. To achieve research questions, this research analyzed the results of diagnostic assessment of mathematics underachievers from the third grade to the sixth grade of two elementary schools, Seoul, carried out in March, 2010. Results were classified according to grades and genders. Each analysis was performed under the standards of frequency and frequency level. Secondly, questionnaires were conducted, and general trend of mathematics underachievers were analyzed. Conclusion based on research results above can be drawn as follows: Firstly, as a result of analyzing the general trend of mathematics underachievers in the elementary school, mathematics underachievers appeared to be accumulated and intensified as their grade is ascended. Therefore, support and encouraging students to experience mathematics positively and successfully from the elementary school is needed. In addition, to prevent the accumulation of learning deficiency, preventive measures should be taken from the lower grades. Secondly, the possibility of accumulating learning deficiency due to the selection method in deciding underachieving only with total scores should not be disregarded. Therefore, since the accumulation of learning deficiency can be worked as a new factor of learning underachieving, the amendment of teaching methods in learning underachieving based on objective data analysis is required. Thirdly, teachers and students recognized that the learner is the main factor of mathematics underachieving. This indicates that mathematics learning difficulty is improved through the education of learners. Therefore, studies on mathematics underachievers should be activated, and the effective education program should be developed.