• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.23-25
• /
• 1996

In this paper aims at studying the minimal test pattem of the RAM. This also propose a scheme of testing faults from the new fault model using the LLB. The length of test patterns are 6N(1-wsf), 9.5N(2-wsf), 7N(3-wsfl, 3N(4-wsf) operations in N-bit RAM. This test techniques can write into memory cell the number of write operations is reduced and then much testing time is saved. A test set which detects all positive-negative static t-ws faults for t=0, 1, 2, 3, 4 and detects all pattern sensitive fault in memory array. A new fault model, which encompasses the existing fault model Is proposed.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.21-28
• /
• 2015

In this paper, we propose a method of glasses detection in facial image. we develop a detection method of glasses with a weighted sum of the results that detected by facial element detection and glasses frame candidate region. Component of the face detection method detects the glasses, by defining the detection probability of the glasses according to the detection of a face component. Method using the candidate region of the glasses frame detects the glasses, by defining feature of the glasses frame in the candidate region. finally, The results of the combined weight of both methods are obtained. The proposed method in this paper is expected to increase security system's recognition on facial accessories by raising detection performance of glasses or sunglasses for using ATM.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.277-280
• /
• 1995

This paper describes a real time QRS detection algorithm. The proposed algorithm detects QRS complex using characteristics of the 2-dimensional phase portrait which is reconstructed from 1-demensional scalar time series. We observe the phase portrait of ECG signal has special trejectory when QRS complex occurs and apply it to detect QRS complexes. In order to evaluate the performance of the proposed algorithm, we use MIT/BIH arrhythmia database. As a result, the proposed algorithm correctly detects 99.3% of the QRS complexes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.21-24
• /
• 2002

This paper presents a new method for the motion detection of vehicles using hierarchical motion estimation and parallel processing. It captures the road image by using a CMOS sensor. It divides the captured image into small blocks and detects the motion of each block by using a block-matching method which is based on a hierarchical motion estimation and parallel processing for the real-time processing. The parallelism is achieved by using the pipeline and the data flow technique. The proposed method has been implemented with an embedded system. Experimental results show that the proposed method detects the motion of vehicles in real-time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.111-116
• /
• 1998

In this study, we try to coincide virtual robot system in an OLP(off-line programming) with actual robot system even though kinematic differences between them are made. The virtual robot in the OLP may be modeled according to kinematics of the actual robot system. However, it is a complicated problem to find exactly all kinematic parameters of actual robot and environment. In this paper, an automated calibration method is proposed In order to find some kinematical parameters which are necessary for the modeling of a robot and environment in the OLP. It is applicable to SCARA robot for assembly task. In this method, a well-marked worktable of environment Is regarded as reference coordinate frame. The robot detects some marks on the worktable through sensors attached to the end-effector. The necessary parameters are calculated from the data of the robot joint variables when the robot detects the mark. The model in the OLP is modified by the parameters.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.134-145
• /
• 2004

This paper presents and analyses protection schemes for a series active compensator, which consists of a Unified Power Quality Conditioner (UPQC) or a hybrid active power filter. The proposed series active compensator operates as a high impedance "k(D)" for the fundamental components of the power frequency during over current conditions in the distribution system. Two control strategies are proposed in this paper. The first strategy detects the fundamental source current using the p-q theory. The second strategy detects the fundamental component of the load current in the Synchronous Reference Frame (SRF). When over currents occur in the power distribution system momentarily, the proposed schemes protect the series active compensator without the need for additional protection circuits, and achieves excellent transient response. The validity of the proposed protection schemes is investigated through simulation and compared with experimental results using a hybrid active power filter systems.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.29-33
• /
• 1996

In this study, specimens were prepared which have some defects on the buttweld joint of mild steel. In order to detect the defects of specimens, the following tests were put to : AUT and RT. When the results of the three tests were compared, the conclusion could be brought to as follows. 1) AUT outstrips RT in the abillity to detect plane defects like slags or cracks, but RT excels AUT in the ability to detect spheroidal defects like blowholes. 2) RT detects neither taper cracks nor very closed cracks, whereas AUT detects both of them. 3) AUT can detect at once plane defects like cracks and spheroidal defects like blowholes.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.49-54
• /
• 2016

There is needed the quard channel triple wave lengths pyroelectric infrared flame detector to recognize the unique characteristics of fire sources in various type. This system detects the triple wave lengths of infrared flame emitting maximum radient energy and scattering frequency of flame. The quard channel infrared flame detector detects the duplicate wave lengths of maximum radient energy to enhance the accuracy of detecting fire. Especially this paper focuss on development of the self diagnosis function system including contamination, temperature and input voltage. Therefore, the prevention and early suppression of fire is available.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권8호
• /
• pp.3809-3822
• /
• 2017

Wireless Sensor Networks hold the limelight because of significant potential for distributed sensing of large geographical areas. The radio duty cycling mechanism that turns off the radio periodically is necessary for the energy conservation, but it deteriorates the network congestion when the traffic load is high, which increases the packet loss and the delay too. Although many papers for WSNs have tried to mitigate network congestion, none of them has mentioned the congestion problem caused by the radio duty cycling of MAC protocols. In this paper, we present a simple and efficient congestion control technique that operates on the radio duty cycling MAC protocol. It detects the congestion by checking the current queue size. If it detects the congestion, it extends the network capacity by adding supplementary wakeup times. Simulation results show that our proposed scheme highly reduces the packet loss and the delay.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1288-1296
• /
• 2016

The reliable detection of the limited defect in TFT-LCD images is difficult due to the small intensity difference with the background. However, the proposed detection method reliably detects the limited defect by enhancing the TFT-LCD image based on the cumulative histogram and then detecting the defect through the mean and standard deviation of the enhanced image. Notably, an image enhancement using a cumulative histogram increases the intensity contrast between the background and the limited defect, which then allows defects to be detected by using the mean and standard deviation of the enhanced image. Furthermore, through the comparison with the histogram equalization, we confirm that the proposed algorithm suppresses the emphasis of the noise. Experimental comparative results using real TFT-LCD images and pseudo images show that the proposed method detects the limited defect more reliably than conventional methods.