• 한국측량학회지
• /
• 제39권5호
• /
• pp.253-263
• /
• 2021

Traffic data collected using advanced equipment are highly valuable for traffic planning and efficient road operation. However, there is a problem regarding the reliability of the analysis results due to equipment defects, errors in the data aggregation process, and missing data. Unlike other detectors installed for each vehicle lane, radar detectors can yield different error types because they detect all traffic volume in multilane two-way roads via a single installation external to the roadway. For the traffic data of a radar detector to be representative of reliable data, the error factors of the radar detector must be analyzed. This study presents a field survey of variables that may cause errors in traffic volume collection by targeting the points where radar detectors are installed. Video traffic data are used to determine the errors in traffic measured by a radar detector. This study establishes three types of radar detector traffic errors, i.e., artificial, mechanical, and complex errors. Among these types, it is difficult to determine the cause of the errors due to several complex factors. To solve this problem, this study developed a radar detector traffic volume error analysis model using a multiple linear regression model. The results indicate that the characteristics of the detector, road facilities, geometry, and other traffic environment factors affect errors in traffic volume detection.

• 한국ITS학회 논문지
• /
• 제13권5호
• /
• pp.11-20
• /
• 2014

실시간 교통정보는 현장에 설치된 차량검지기가 수집하는 교통량, 속도, 점유율 자료를 기반으로 생성된다. 따라서 검지기 성능을 일정수준으로 유지시키는 것이 중요하다. 이를 위해 ITS 관리기관에서는 주기적으로 검지기에 대한 성능평가를 수행한다. 일반적으로 검지기 성능평가는 기준값을 생성하는 장비(기준장비)와 평가대상 검지기가 수집하는 자료를 상호 비교함으로써 수행된다. 여기서 유의할 점은 기준장비 수집값 역시 평가대상 검지기 자료와 같이 오차 및 불확도를 포함하고 있다는 것이다. 또한 검지기 평가가 표본집단에 대해 이루어지기 때문에 이를 모집단의 결과로 표현하기 위해서는 신뢰구간 개념이 적용되어야 한다. 그러나 현재 국내 검지기 성능평가는 합리적인 방법론 부재로 인해 기준값 불확도 및 신뢰구간 개념을 적용하지 않고 있다. 따라서 본 연구에서는 기준값 불확도 및 신뢰구간 개념을 적용한 성능평가 방법론을 제시했고, 이를 루프, 영상, 레이더 검지기 성능평가에 적용했다. Over-count, Under-count 상쇄효과를 제거하기 위해 개별차량단위 자료를 평가하였고 그 결과, 제시된 방법론이 검지기 성능평가에 효과적으로 적용될 수 있음을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2956-2958
• /
• 2000

This paper describes the design of a real time traffic data acquisition system using loop detector and piezzo sensor. Loop detector is the cheapest method to measure the speed and piezzo is used to detect the vehicle axle information. A ISA slot based I/O board is designed for data acquisition and PC process the raw traffic data and transfer the data to the host system. Simulation kit is designed with toy car kits. simulated loop detector and piezzo sensor. The data acquisition system collects up to 10 lane highway traffic data such as vehicle count. speed. length axle count. distance between the axles. The data is processed to generate traffic count, vehicle classification, which are to be used for ITS. The system architecture and simulation data is included and the system will be tested for field operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.612-615
• /
• 2003

In this paper, a design of radiation detector for gamma column scanner is introduced. Distillation column is important unit in Petro-chemical industries, and its on-line diagnose is very important. To get density profile measured by the radiation transmitted through column is well method for on-line diagnose as gamma scanning. For this purpose radiation detection circuit, radiation source and mechanical system for moving source and detector are required. Conventional radiation detection circuit for this application is sensitive to electric noise because of interface between the radiation circuit and the controller for mechanical system. The radiation detection system introduced here is using loop coil instead of slip ring to remove contact noise. Radiation detection system designed here for gamma scanning consist of BGO detector, high voltage circuit, PHA circuit and FSK modem. The BGO detector is used as radiation sensor, high voltage circuit and peak height analysis circuit is essential to process the signal generated from BGO detector. Micro controller convert measured data into ASCII data. FSK modem transmit ASCII data. Transmitted ASCH data is picked up in antenna coil and processed for combined function with mechanical system. This method gives good result by isolating the controlling circuit of mechanical system from radiation detecting circuit which is sensitive to noise.

• Journal of the Korean Data and Information Science Society
• /
• 제16권2호
• /
• pp.289-300
• /
• 2005

In this article quick variance change point (VCP) detection problem for time series is considered. For this variance VCP detector equipped with tuning parameters is proposed. A major tool for the detector is moving variance ratio (MVR) which monitors variance change of a given time series. Tuning process of detector is investigated via simulation, which shows that tuning parameters are critical in achieving sensitivity and adaptiveness of detector.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.101-113
• /
• 1986

In this paper, a real-time pitch detector LPC vocoder as implemented on a high speed digital signal processor, NEC 7720, is described. The pitch detector was based mainly on the SIFT algorithm. The SIFT pitch detector consists primarily of a digital low pass filter, inverse filter, computation of autocorrelation, a peak picker, interpolation, V/UV defcision and a final pitch smoother. In our approach, modification, mainly on the V/UV decision and a final pitch smoother, was made to estimate more accurate pitches. An 16-bit fixed-point aithmatic was employed for all necessary computation and the simulated results were compared with the eye detected pitches obtained from real speech data. The pitch detector occupies 98.8% of the instruction ROM, 37% of the data ROM, and 94% of internal RAM and takes 15.2ms to estimate a pitch when an analysis frame is consisted of 128 sampled speech data. It is observed that the tested results were well agreed with the computer simulation results.

• 한국ITS학회 논문지
• /
• 제12권5호
• /
• pp.22-35
• /
• 2013

본 논문은 영상검지기 증가에 따라 교통정보 신뢰도에 대한 우려가 높아지고 있는 바, 지점검지기 데이터 분석을 통해 신뢰도가 높은 대표 구간 교통량 생성방법을 제안하였다. 이를 위해 고속도로를 대상으로 영상과 루프 검지기에서 각각 수집된 교통량 차이를 비교분석하고 통계적으로 검증하였으며, 실측교통량과의 오차율을 분석하였다. 분석 결과, 영상검지기와 루프검지기에서 각각 수집된 교통량은 동일 구간, 동일한 시간대에 수집된 자료라도 차이가 있었으며, 이는 통계적으로 유의하였다. 또한 루프검지기에서 수집된 교통량이 실측교통량과의 가장 차이가 적어, 대표 구간 교통량 생성 시 루프 및 영상 교통량을 평균하는 현재의 방법보다 영상검지기보다 신뢰도가 높은 루프 검지기 자료를 대표치로 이용하는 방법을 제안하였다. 이는 다양한 신뢰도를 보이는 많은 데이터를 이용하여 대표치를 생성하는 것보다, 하나라도 보다 신뢰성이 높은 데이터를 대표치로 이용하는 것이 훨씬 양질의 데이터를 생성할 수 있음을 보여준다. 다만, 루프검지기라고 할지라도 유지관리 및 기타 다양한 요소에 의해 신뢰도가 저하될 수 있으므로 검지기 상태에 대한 검증과 평가는 반드시 전제되어야 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제16권2호
• /
• pp.173-183
• /
• 2005

This paper studies quick detection of variance change point for iid data. For development of sensitive and adaptive variance change point detector, moving variance ratio is employed as a variance ratio estimator. It is shown that selection of tuning parameters of detector, (i.e., information and lag tuning parameters) is critical for detector to achieve desirable sensitivity and adaptiveness. Interestingly our simulation result reveals limitations of the commonly used change ratio against the previous day. Our results will provide useful insight when the detector is applied to time series data.

• Communications for Statistical Applications and Methods
• /
• 제19권4호
• /
• pp.579-590
• /
• 2012

Local linear jump detection in a discontinuous regression function involves the choice of the bandwidth and the performance of a local linear jump detector depends heavily on the choice of the bandwidth. However, little attention has been paid to this important issue. In this paper we propose two fully data adaptive bandwidth selection methods for a local linear jump detector. The performance of the proposed methods are investigated through a simulation study.

• ETRI Journal
• /
• 제29권2호
• /
• pp.143-152
• /
• 2007

In this paper, we propose a time-varying modified minimum mean-squared error (MMSE) detector for the detection of higher data rate signals in a multirate asynchronous code-division multiple-access (CDMA) system which is signaled in a fast Rayleigh fading channel. The interference viewed by a higher data rate symbol will be periodic due to the presence of a lower data rate symbol which spans multiple higher data rate symbols. The detection is carried out on the basis of a modified MMSE criterion which incorporates differential detection and the ratio of channel coefficients in two consecutive observation intervals inherently compensating the fast variation of the channel due to fading. The numerical results obtained by the MMSE detector with time-varying detection show around 3 dB (M=2) and 6 dB (M=4) performance improvement at a BER of $10^{-3}$ in the AWGN channel, while introducing more computational complexity than the MMSE detector without time-varying detection. At a higher $E_b/N_0$, the proposed scheme can achieve a BER of approximately $10^{-3}$ in the presence of fast channel variation which is an improvement over other schemes.