• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.403-418
• /
• 2007

The objective of this research was to characterize the fate and transport of Cr(VI) contaminated groundwater in the Daejeon industrial area. Five subsidiary monitoring wells were newly installed and two existing wells were utilized for the investigation and the reduction process of Cr(VI) contaminated groundwater of the Daejeon(Mun-pyeong) national groundwater monitoring station. The Cr(VI) concentrations at the shallow aquifer well of the station were in the range of 3.2-4.5 mg/L indicating continuous contamination. However, Cr was not detected at the deep bedrock well and the other monitoring wells except MPH-1 and 3. The Cr(VI) concentrations of MPH-1 and MPH-3 were below the drinking water guideline value (0.05 mg/L). Therefore, the plume of the Cr(VI) contaminated groundwater was predicted to be confined within the narrow boundary around the station. The soluble/exchangeable Cr(VI) concentrations were below the detection limit in all core and slime samples taken from the five newly installed wells. Although the exact source of contamination was not directly detected in the study area, the spatial Cr(VI) distribution in groundwater and characteristics of the core samples indicated that the source and the dispersion range were confined within the 100 m area from the monitoring station. The contamination might be induced from the unlined landfill of industrial wastes which was observed during the installation of an subsidiary monitoring well. For the evaluation of the natural attenuation of Cr(VI), available reduction capacities of Cr(VI) with an initial concentration of 5 mg/L were measured in soil and aquifer materials. Dark-gray clay layer samples have high capacities of Cr(VI) reduction ranging from 58 to 64%, which is obviously related to organic carbon contents of the samples. The analysis of reduction capacities implied that the soil and aquifer materials controlled the dispersion of Cr(VI) contamination in this area. However, some possibilities of dispersion by the preferential flow cannot be excluded due to the limited numbers of monitoring wells. We suggest the removal of Cr(VI) contaminated groundwater by periodical pumping, and the continuous groundwater quality monitoring for evaluation of the Cr(VI) dispersion should be followed in the study area.

• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.94-102
• /
• 1997

Purpose: There have been some efforts to diagnose intracranial aneurysm through a non-invasive method using MRA, although the process may be difficult when the lesion is less than 3mm. The present study prospectively compares the results of high resolution, fast speed slice interpolation MRA and DSA thereby examing the potentiality of primary non-invasive screening test. Materials and Methods: A total of 26 cerebral aneurysm lesions from 14 patients with subarachnoid hemorrhage from ruptured aneurysm (RA) and 5 patients with unruptured aneurysm(UA). In all subjects, MRA was taken to confirm the vessel of origin, definition of aneurysm neck and the relationship of the aneurysm to nearby small vessels, and the results were compared with the results of DSA. The images were obtained with 1.5T superconductive machine (Vision, Siemens, Erlangen, Germany) on 4 slabs of MRA using slice interpolation. The settings include TR/TE/FA=30/6.4/25, matrix $160{\times}512$, FOV $150{\times}200$, 7minutes 42 seconds of scan time, effective thickness of 0.7 mm and an entire thickness of 102. 2mm. The images included structures from foramen magnum to A3 portion of anterior cerebral artery. MIP was used for the image analysis, and multiplanar reconstruction (MPR) technique was used in cases of intracranial aneurysm. Results: A total of 26 intracranial aneurysm lesions from 19 patients with 2 patients having 3 lesion, 3 patients having 2 lesions and the rest of 14 patients having 1 lesion each were examined. Among those, 14 were RA and 12 were UA. Eight lesions were less than 2mm in size, 9 lesions were 3-5mm, 7 were 6-9mm and 2 were larger than IOmm. On initial exams, 25 out of 26 aneurysm lesions were detected in either MRA or DSA showing 96% sensitivity. Specificity cannot be estimated since there was no true negative of false positive findings. When MRA and MPR were used concurrently for the confirmation of size and shape, the results were equivalent to those of DSA, while in the confirmation of aneurysm neck and parent vessels, the concurrent use of MRA and MPR was far superior to the sole use of either MRA or DSA. Conclusion: High resolution MRA using slice interpolation technique showed equal results as those of DSA for the detection of intracranial aneurysm, and may be used as a primary non-invasive screening test in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.355-361
• /
• 2006

In this study, effects of influent C/N(COD/Nitrate) ratio and dissolved oxygen(DO) concentration on biological nitrate removal from groundwater were investigated in the fixed-type biofilter. Influent nitrate of 30 mg/L was removed completely by biological denitrification at the C/N ratio of 10 and 4.0, while residual nitrate of 5 mg/L occurred at the C/N ratio of 2.0, which resulted from deficiency of organic electron donor. Furthermore, nitrite was accumulated up to about 5 mg/L as the C/N ratio decreased to 2.0. Increase in DO concentration also inhibited denitrification activity at the relatively high C/N ratio of 5.0, which decreased the nitrate removal efficiency. Although the influent DO concentration was reduced as low as 0.3 mg/L using sodium sulfite($Na_2SO_3$), effluent nitrite was up to 3.6 mg/L. On the other hand, nitrate was completely removed without detection of nitrite at the DO concentration of 0.3 mg/L using nitrogen gas($N_2$) sparging. The organic matter for denitrification in biofilter were in the range from 3.0 to $3.5gSCOD/g{NO_3}^--N$, while utilized these values increased at the high DO concentration of 5.5 mg/L. In addition to the high DO concentration and the low influent C/N ratio, DO control by chemical such as sodium sulfite affected on biological denitrification, which resulted in the reduction of nitrate removal efficiency and nitrite build-up in a biofilter.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.273-291
• /
• 2016

Some ceramic artifacts representing time-wise from comb pattern pottery in the Neolithic Age to white porcelain in Joseon Dynasty were selected from 7 sites in the north and south area of Charyeong Mountain Range in order to making techniques interpretation and development process of ancient ceramics through physicochemical and mineralogical quantitative analysis. Studied pottery samples in the Prehistoric times showed trace of ring piling in soft-type, and pottery in the Three Kingdoms Period had both soft and hard-type but kettle-ware and storage-ware were made with ring piling, but table-ware was made by wheel spinning. Different from pottery after the Three Kingdom Period when refinement of source clay was high, pottery in the Neolithic Age and in the Bronze Age exhibited highly mineral content in sandy source clay, which showed a lot of larger temper than source clay. Groundmass of celadon and white porcelain almost did not reveal primary minerals but had high content of minerals by high temperature firing. Ceramic samples showed some different in major and minor elements according to sites irrespective of times. Geochemical behaviors are very similar indicating similar basic characteristics of source clay. However, loss-on-ignition showed 0.01 to 12.59wt.% range with a large deviation but it rapidly decreased moving from the Prehistoric times to the Three Kingdom Period. They have correlation with the weight loss due to firings, according to burning degree of source clay and detection of high temperature minerals, estimated firing temperatures are classified into 5 groups. Pottery in the Neolithic Age and in the Bronze Age belongs from 750 to $850^{\circ}C$ group; pottery in the Three Kingdom Period are variously found in 750 to $1,100^{\circ}C$ range of firing temperature; and it is believed celadon and white porcelain were baked in high temperature of 1,150 to $1,250^{\circ}C$. It seems difference between refinement of source clay and firing temperature based on production times resulted from change in raw material supply and firing method pursuant to development of production skill. However, there was difference in production methods even at the same period and it is thought that they were utilized according to use purpose and needs instead of evolved development simply to one direction.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.187-192
• /
• 2017

The consumption of herbal medicines has been increasing with growing interest in health. However, due to recent climate change and the complex distribution process of herbal medicines with high import dependence the likelihood of contamination with mycotoxin has been increased. Mycotoxins are emerging as key indicators for ensuring safety of herbal medicines. A total of 498 herbal medicine samples were screened for mycotoxin contamination in this study. Aflatoxin in the herbal medicine samples was extracted by using immunoaffinity column, then the extracted aflatoxin was quantified via high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD) method. The extraction method was verified by linearity, recovery, LOD and LOQ. Aflatoxins were detected in 39/498 samples in an average of $7.670{\mu}g/kg$ ($0.610-77.452{\mu}g/kg$ range). Although safety standards for Corydalis Tuber is not currently available in korea, five of the 39 samples had high concentration of aflatoxins (average of $14.9{\pm}4.1{\mu}g/kg$). In conclusion, it is urgent to establish safety criteria of aflatoxin in Corydalis Tuber. The results of the current study suggest that continuous monitoring is necessary for proactive management of herbal medicine safety.

• Journal of Gastric Cancer
• /
• v.1 no.1
• /
• pp.55-59
• /
• 2001

Purpose: Several studies of an endoscopic mucosal resection(EMR) have been reported, but reports about benign protruding lesions that arise at the scar of EMR for early gastric cancer (EGC) or a gastric adenoma are rare. The purpose of this study was to elucidate endoscopic and histological characteristics of benign protruding lesions which arise at the scar of an EMR for EGC and a gastric flat adenoma. Materials and Methods: In 101 lesions (73 gastric flat adenomas and 28 EGCs) from 96 patients, 16 lesions developed new protruding lesions that arose at the scar of the EMR. We retrospectively analyzed the endoscopic findings of initial and protruding lesions, and several other clinical factors (H. pylori infection, eradication therapy, and proton pump inhibitor (PPI) or H2-blocker use). Results: 1. The mean duration until detection of the protruding lesion was 8.9 months ($1.5\∼27$). Protruding lesions arose at the scar of the EMR in 1 of 28 EGCs ($3.6\%$) and from 15 of 73 gastric flat adenomas ($20.5\%$). All of the patients were men. 2. With respect to the endoscopic findings, the shapes of the protruding lesions were as follows: 10 Yamada (Y) I, 4 Y-II, 1 Y-III, and 1 flat lesion. Histological examination of the protruding lesions revealed regenerating hyperplasia in 5 lesions, intestinal metaplasia in 5, and both in 6. 3. The incidence of these lesions was higher in cases of tubular adenomas with focal high-grade dysplasia than in cases of tubular adenomas without dysplasia (p<0.05). 4. The incidence of H. pylori infection was higher in patients ($81.7\%$) who developed a protruding lesion than in those ($51.8\%$) who did not develop (p=0.029); also, the incidence of use of PPI was higher in those patients (p=0.045). However, eradication therapy for H. pylori and duration of use of PPI or H2-blocker showed no difference between groups. Conclusions: It may be possible that the potential hyperplasia that may reside in normal mucosa surrounding EGC or a gastric adenoma might awaken during the healing process of the EMR ulcer and develop to benign protruding lesions. And, H. pylori and PPI might also be related to the development of the protruding lesions.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.211-217
• /
• 2003

The Principal component analysis (PCA) is a well-known data analysis method that is useful in linear feature extraction and data compression. The PCA is a linear transformation that applies an orthogonal rotation to the original data, so as to maximize the retained variance. PCA is a classical technique for obtaining an optimal overall mapping of linearly dependent patterns of correlation between variables (e.g. neurons). PCA provides, in the mean-squared error sense, an optimal linear mapping of the signals which are spread across a group of variables. These signals are concentrated into the first few components, while the noise, i.e. variance which is uncorrelated across variables, is sequestered in the remaining components. PCA has been used extensively to resolve temporal patterns in neurophysiological recordings. Because the retinal signal is stochastic process, PCA can be used to identify the retinal spikes. With excised rabbit eye, retina was isolated. A piece of retina was attached with the ganglion cell side to the surface of the microelectrode array (MEA). The MEA consisted of glass plate with 60 substrate integrated and insulated golden connection lanes terminating in an 8${\times}$8 array (spacing 200 $\mu$m, electrode diameter 30 $\mu$m) in the center of the plate. The MEA 60 system was used for the recording of retinal ganglion cell activity. The action potentials of each channel were sorted by off­line analysis tool. Spikes were detected with a threshold criterion and sorted according to their principal component composition. The first (PC1) and second principal component values (PC2) were calculated using all the waveforms of the each channel and all n time points in the waveform, where several clusters could be separated clearly in two dimension. We verified that PCA-based waveform detection was effective as an initial approach for spike sorting method.

• Clinical and Experimental Pediatrics
• /
• v.51 no.9
• /
• pp.971-976
• /
• 2008

Purpose : Surveillance for detecting and managing latent tuberculosis infection (LTBI) is a key component of tuberculosis control. The classic surveillance tool, the tuberculin skin test (TST), may have some limitations when used in the Bacillus Calmette-$Gu{\acute{e}}rin$ (BCG)-vaccinated population. The object was to perform a blood test $QuantiFERON^{(R)}$-TB Gold In Tube (QFT-G IT) based on the detection of interferon-$\gamma$ ($IFN-{\gamma}$) released by T cells in response to Mycobacterium tuberculosis-specific antigens, and to compare the efficacy of this new diagnostic tool for LTBI with that of TST. Methods : For six months, between October 1, 2006 and April 30, 2007, data were collected from 111 patients under 15 years of age at Severance Children's Hospital. TST and QFT-G IT tests were performed with children with or without contact histories of tuberculosis. In addition to these tests, we examined comparative data from 29 adults who had tuberculosis, to detect false negative rates in the QFT-G IT method. Results : Thirty-three children had household contact histories. In this group, 15% and 42% of cases were found to be positive using the QFT-G IT assay and TST, respectively. Agreement was low between these two tests (${\kappa}=0.39$). In the adult active tuberculosis group, the QFT-G IT false negative rate defined as a positive culture and a negative QFT-G IT result was 12.5%. Conclusion : In diagnosing LTBI in children, the usefulness of a whole-blood $IFN-{\gamma}$ assay employing TB-specific antigens will be revealed only by examining additional longitudinal clinical data; this study serves as a starting point in that process.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.5
• /
• pp.379-384
• /
• 2008

Background: Sputum decontamination with NALC-NaOH (N-acetyl-L-cysteine-sodium hydroxide) is known to better detect Mycobacterium tuberculosis (M. tb) by culture than that with using NaOH, which is widely used in Korean hospitals. In this report, sputum samples collected from pulmonary tuberculosis (TB) patients were treated with either NaOH or NALC-NaOH, and we compared the results of smear and culture positivity to determine whether the NALC-NaOH treatment method improves culture positivity in the sputum samples, and especially for those sputum samples that are smear negative and scanty. Methods: For each decontamination method, 436 sputum samples from pulmonary TB patients in the National Masan Tuberculosis Hospital were collected for this study. Sputum from a patient was collected two times for the first and second day of sampling time, and these samples were employed for the decontamination process by performing the 4% NaOH and NALC-2% NaOH treatment methods, respectively, for detecting M. tb by an AFB (Acid Fast Bacilli) smear and also by culture in solid Ogawa medium. Results: The NaOH and NALC-NaOH treatment methods did not significantly affect the AFB smear positivity of the sputum samples (33.0% vs 39.0%, respectively, p=0.078). However, the culture positive percents of M. tb in the Ogawa medium treated with NALC-NaOH and NaOH were 39.7% and 28.0%, respectively, which was a significantly different (p=0.0003). This difference in culture was more prominent in the sputum samples that were smear negative (the positive percents with NALC-NaOH and NaOH were 15.8% and 7.2%, respectively, p=0.0017) and scanty (NALC-NaOH and NaOH were 60.8% and 42.9%, respectively, p=0.036), but not for a smear that was 1+ or higher (p>0.05). Conclusion: NALC-NaOH treatment is better than NaOH treatment for the detection of M. tb by culture, but not by smear, and especially when the AFB smear is negative and scanty.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1270-1276
• /
• 2013

Laver, a red algae belonging to the genus Porphyra tenera, is one of the most widely consumed edible seaweeds in Korea, China, and Japan. Lavers are usually consumed in dried, roasted, and seasoned forms to improve their palatability. We evaluated the composition of amino acids, minerals, and trace heavy metals in these three differently cooked forms of laver. The moisture and ash contents of three differently cooked lavers ranged from 1.49~9.69% and 6.07~10.31%, respectively. The crude protein and lipid content ranged from 17.24~36.88% and 0.52~42.42%, respectively. Dried laver was found to be a good source of amino acids such as taurine, alanine, and glutamic acid (871.10 mg, 833.53 mg, and 719.77 mg per 100 g dry weight, respectively). Laver was a good source of macro and micro minerals such as K, Ca, Mg, Na, P, I, and Fe, although laver more extensively cooked (roasted and seasoned) contained less minerals compared to the dried form. Mercury levels in the three differently cooked forms of laver were all less than 100 ng/g dry weight (the limit of detection with our methodology). The levels of arsenic were the most abundant elements in the differently cooked laver. There was a clear variation, depending on the cooking process, in terms of amino acid, mineral, and trace metal contents of laver.