• 방사선산업학회지
• /
• 제17권1호
• /
• pp.101-110
• /
• 2023

Radiation and radioisotopes have a high value in terms of utilization that can be used in convergence with various fields. However, due to the specificity of radiation, the use of radiation and radioisotopes is more difficult than in other industrial fields and also involves complex regulations. There are no clear industrial technology standards in these fields. Therefore, the growth of the radiation industry, especially including small companies, is being delayed. Since industrial technology standards play an important role in providing an institutional basis for the continuous development and settlement of domestic technology, the development of technical standards for the radiation and radioisotope industries can lead to systematic growth of the domestic radiation industry. To this end, the technology classification of the radiation industry was promoted and classified into 7 major categories, and detailed classification was divided according to the characteristics of each technology. In addition, a demand and perception survey on the need for industrial technology standards was conducted on RI licensed institutions and companies, and as a result, 61.4% responded that it was necessary, and in particular, they recognized the need for radiation safety(63.3%). In this paper, the technical classification for the radiation field is presented as the first step in the development of industrial technical standards for the radiation industry. In addition, the plan of the current status information and preparation of standard procedures of each category will be discussed.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.612-618
• /
• 2007

There are a lot of openings, holes and slots in ship structural members. It is not easy to solve the troubles around the openings adequately at the detail design stage, because there are a lot of concerning locations. There are not also clear design rules of classification societies and it is not possible to apply direct calculation for all the concerning members. Therefore, it is necessary to set up simplified approach such as a standard or guidance in order to decide the opening design quickly. For this study, guidance and regulations of each classification and several companies were surveyed. Grillage analysis and the refined mesh method were used to evaluate the strength around hole considering boundary condition and more detailed member arrangement. As a result, the standard for opening design was established and verified.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.20-25
• /
• 2006

In the design of class 1 components to apply ASME code section III NB, a fatigue is considered as one of the important failure mechanisms. Fatigue analysis procedure and standard fatigue design curve(S-N curve) is suggested in ASME code, which had to be performed to meet the integrity of components at the design step. As the plant life extension for operating power plants and the long-lived plant design, however, are being progressed, the fact which the existing ASME fatigue design curve can not consider fatigue effects sufficiently comes to the fore. To find the technical solution for these problems, a number of researches and discussion are continued up to now. In this study, the detailed fatigue analyses using the 3 dimensional modeling for the fatigue-weakened components were performed to develop the optimized fatigue analysis procedure and their results are compared with other reference solutions.

• 복식
• /
• 제62권3호
• /
• pp.73-83
• /
• 2012

The purpose of this study is to contribute in developing guidebooks that can be used in the courses of needlework study by comparing and analyzing the contents and organizations of needlework-related teaching resources available at the present university and fashion-related educational institutions. This research could help us train technical human resources to be highly adaptable in industrial settings. The results of this study showed that the overall organization of contents is mostly divided into such categories as needlework kits, basic hand sewing, seam finishing, partial needlework and decorative needlework. The study results also indicated that such content organization must be considered in basic needlework/sewing processes and that each content needs to provide more various and detailed information by reflecting recent trends in design. Partial needlework has different applications in terms of interlining attachment, subsidiary materials, or sewing techniques; therefore, consistent descriptions and standard guidelines should be given according to what material is used and which design is planned. This study found that most teaching resources covered only needlework or sewing techniques without giving specific descriptions of types of materials, lining and interlining that can have great influence on sewing methods and instructions on how to use the materials. These findings suggest that the teaching resources need to add further technical instructions for the proper use of materials especially in response to the recent release of brand-new materials and sewing machines in the market.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.80-90
• /
• 2019

Fuel cell hybrid electric vehicle is an attractive solution to reduce pollutants, such as noise and carbon dioxide emission. This study presents an approach for energy management and control algorithm based on energetic macroscopic representation for a fuel cell hybrid electric vehicle that is powered by proton exchange membrane fuel cell, battery and supercapacitor. First, the detailed model of the fuel cell hybrid electric vehicle, including fuel cell, battery, supercapacitor, DC-DC converters and powertrain system, are built on the energetic macroscopic representation. Next, the power management strategy was applied to manage the energy among the three power sources. Moreover, the control scheme that was based on back-stepping sliding mode control and inversed-model control techniques were deduced. Simulation tests that used a worldwide harmonized light vehicle test procedure standard driving cycle showed the effectiveness of the proposed control method.

• Journal of the Korean Data and Information Science Society
• /
• 제22권1호
• /
• pp.125-136
• /
• 2011

Ground-level ozone, an air pollutant that is monitored by the Environmental Protection Agency (EPA), damages human health by irritating the respiratory system, reducing lung function, damaging lung cells, and aggravating asthma and other chronic conditions. In March 2008, the EPA strengthened ozone standards by lowering acceptable limits from 84 parts per billion to 75 parts per billion. Here epidemiologic data is used to study the effects of ozone regulation on human health and assessed how various regulatory standards for ozone may affect nonaccidental mortality, including respiratory-related deaths during ozone season. The assessment uses statistical methods based on hierarchical Bayesian models to predict the potential effects of the different regulatory standards. It also analyzes the variability of the results and ho they are impacted by different modeling assumptions. We focused on the technical an statistical approach to assessing relationship between new ozone regulations and mortality while other researches have detailed the relationship between ozone and human mortality. We shows a statistical correlation between ozone regulations and mortality, with lower limits of acceptable ozone linked to a decrease in deaths, and projects that mortality is expected to decrease by reducing ozone regulatory standards.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.197-204
• /
• 2014

As more and more renewable energy resources are connected into the existing power system and their generation capacities are increasing, the need for regulations to minimize their impacts on the power grid is increasingly growing. And minimizing the irregular impacts made by grid-connected wind generators is important, since the output power generated by renewable energy resources can be changed easily by the weather condition and surrounding environment. In South Korea, an operational technical standard for distributed generation is used as a regulation, in which renewable energy sources including wind power are considered as a kind of distributed generation. In this paper, an international standard, IEC 61400-21, for the grid-connected wind turbine generating system(WTGS) will be introduced and a comprehensive and detailed review on the measuring methods of power quality characteristic parameters for WTGS based on the related IEC standards will be presented. Additionally, some prerequisites for applying the international standards to KEPCO system will be proposed.

• Current Research on Agriculture and Life Sciences
• /
• 제31권2호
• /
• pp.113-123
• /
• 2013

The carbon-offset mechanism based on forest management has been recognized as a meaningful tool to sequestrate carbons already existing in the atmosphere. Thus, with an emphasis on the forest-originated carbon-offset mechanism, the accurate measurement of the carbon stock in forests has become important, as carbon credits should be issued proportionally with forest carbon stocks. Various remote sensing techniques have already been developed for measuring forest carbon stocks. Yet, despite the efficiency of remote sensing techniques, the final accuracy of their carbon stock estimations is disputable. Therefore, minimizing the uncertainty embedded in the application of remote sensing techniques is important to prevent questions over the carbon stock evaluation for issuing carbon credits. Accordingly, this study reviews the overall procedures of carbon stock evaluation-related remote sensing techniques and identifies the problematic technical issues when measuring the carbon stock. The procedures are sub-divided into four stages: the characteristics of the remote sensing sensor, data preparation, data analysis, and evaluation. Depending on the choice of technique, there are many disputable issues in each stage, resulting in quite different results for the final carbon stock evaluation. Thus, the establishment of detailed standards for each stageis urgently needed. From a policy-making perspective, the top priority should be given to establishinga standard sampling technique and enhancing the statistical analysis tools.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.1-8
• /
• 2011

The overall goal of a safety based railroad system is either to eliminate hazards in designing or to minimize the possibility of it. In order to indicate system safety or low risk although it may not be possible to achieve zero risk conditions, first, it shall ensure that any disasters would occur due to system operation because the prescribed specifications are properly fulfilled and there are no failures of any kind. Second, the risk of faults or failures leading to a mishap must be eliminated or minimized by using fault-tolerance or fail-safe procedures. This paper will attempt to summarize the personal and social risk criterion at widely scattered points, presently used as a safety approach in all over EU, in order to establish the step by step procedures of the detailed standard for railway facilities. In addition, we present the new safety analysis method using the SIL-based evaluation standard and the Reachability Graph of the Petri Net.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권2호
• /
• pp.129-135
• /
• 2020

에너지분야 사물인터넷기술인 e-IoT 통신 및 서비스의 표준화 분야는 최신 기술로 새로운 시장이 창출되는 분야의 주도권을 확보하고 시장을 선점하기 위해 표준모델을 정의하고 실용모델을 실증하는 기술이다. 특히 4차 산업혁명의 기초 기술인 IoT 기술에 대한 프레임워크 개발, 표준화를 통한 상호연동성 확보, 표준 플랫폼의 운영 등을 위해 세부적인 기술규격들을 정의하고 있다. 본 논문에서는 e-IoT 표준 프로토콜 경량화 및 시험인증절차에 관한 방식을 제안한다. 제안된 방식은 향후 e-IoT 제품의 저전력 이슈에 대한 문제를 해결할 수 있는 제품 구현방안을 제공한다.