• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.140-155
• /
• 2002

Void-free impression taking is important for the fabrication of accurate dental restorations. One of the essential properties of an impression material used for indirect fabrication of precision castings is the reproduction of the fine detail. The objective in this study was to determine the influence of mixing methods on the number of voids and surface detail reproduction. The number of voids and surface detail reproduction were evaluated with the steteomicroscope $SZ-PT^{(R)}$ and photographed. The results were as follows ; 1. In comparison of the void formation according to mixing methods of all impression materials, mechanical mixing was better than hand mixing and there was significant difference(p<0.05) 2. In comparison of the void formation according to hand mixing of alginate impression materials($TOKUSO\;A-1{\alpha}^{(R)},\;CAVEX\;IMPRESSIONAL^{(R)},\;AROMA \;FINE\;DF\;III^{(R)}$), there was no significant difference among alginate groups. But the number of void was increased in the order of $Panasil^{(R)}\;contact,\;TOKUSO\;A-1{\alpha}^{(R)},\;Permlastic^{(R)}$ light bodied and there was significant difference (p<0.05). 3. In comparison of the void formation according to mechanical mixing of alginate impression materials($TOKUSO\;A-1{\alpha}^{(R)},\;CAVEX\;IMPRESSIONAL^{(R)},\;AROMA FINE\;DF\;III^{(R)}$), there was no significant different among alginate groups. But the number of void was decreased in order of $TOKUSO\;A-1{\alpha}^{(R)},\;Permlastic^{(R)}light\;bodied,\;Panasil^{(R)}$ contact and there was significant difference (p<0.05). 4. In comparison of the surface detail reproduction according to mixing methods of 3 types of impression materials($TOKUSO\;A-1{\alpha}^{(R)},\;Permlastic^{(R)}\;light\;bodied,\;Panasil^{(R)}\;contact$), there was no significant difference between hand mixing and mechanical mixing method 5. The surface detail reproduction was only influenced by impression materials, and produced better in order of $TOKUSO\;A-1{\alpha}^{(R)},\;Panasil^{(R)}\;contact,\;Permlastic^{(R)}$ light bodied. There was significat difference among 3 type of impression materials(p<0.05). From the above results, void formation is influenced by mixing methods and surface detail reproduction is influenced by impression materials than mixing methods. Therefore, to fabricate accurate restorations, proper impression material and mechanical mixing method are more effective and available clinically.

• 한국치위생학회지
• /
• 제1권2호
• /
• pp.171-180
• /
• 2001

The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.349-362
• /
• 1996

To determine the factors to affect on stone surface porosities produced from hydrogen gas of additional silicone, both putty and syringe type of 7 commercially different additional silicone impression materials(Blend-A-Scon, Correct VPS, Exaflex, Express, Extrude, Provil, Reprosil) were chosen and NewFujirock(GC) was poured into the impressions of detail-reproducing test block at 1, 15, 30, 45, 60 minutes after the impression materials had set and 4 specimens were made for each pouring time, each type of impression material, and each consisency and So, 280 specimens were made in total. The number of surface porosities of same area($2826 mm^2$) which were typically caused by hydrogen gas using the stereoscope(X 7.5) by two observers. Comparison of putty-syringe type and among the impression materials are tested by Kruscal-Wallis method and Mann-Whitney method(p<0.05). The results are as follows. 1. The number of porosities decreased as the pouring time of stone was delayed on both putty and syringe type of additional silicone materials. 2. The putty type significantly produced more porosities than syringe type except for the group of Reprosil.(p<0.05). 3. In case of putty type, the number of porosities increased as following order. Reprosil / Blend-A-Scon and Provil / Correct VPS and Extrude / Express and Exaflex. 4. In case of syringe type, Blend-A-Scon and Extrude produced no porosity and Exaflex and Provil at 30 minites, but Express produced porosities even at 60 minutes and the most. Additional silicone impression material releases hydrogen gas, and that fact can make the resulting die stone model useless. So, to minimize these adverse effects, it is desirable not to expose putty type of additional silicone on critical impression surface because putty type has a tendency to produce more porosities than syringe type. And it is important to have sufficient time before pouring the stone on impression because porosities produce less as time passes after setting of impression material. Also, there are differences among 7 additional silicone impression materials, so it is desirable to choose adequate brand of additional silicone for good laboratory work.

• 한국치위생학회지
• /
• 제8권4호
• /
• pp.89-99
• /
• 2008

In this study, polyvinylsiloxane impression materials were investigated to examine the characteristics of the impression materials that affect the accuracy of the final restoration. The flow property of impression materials which can reproduce the detail in the oral cavity and accurately duplicate it, and the tear strength and strain-in-compression which can cause problems when it is being removed from the oral cavity were studied. The results are as follows. 1. As for the flow properties of impression materials, Imprint II was 18.24${\pm}$0.30, which was the highest: and Twinz was 8.9${\pm}$0.62, which was the lowest. There was no significant difference among Imprint II, Examixfine, and Genie(p<0.05). 2. As for the tear strength of impression materials, Imprint II had the highest level, while Genie had the lowest value. There was no significant difference between Twinz and Genie(p<0.05). 3. As for the strain-in-compression, there were significant differences by impression material groups(p<0.05); the strain-in-compression of Examixfine was shown to be the highest at 5.56${\pm}$0.56, Twinz and Imprint II followed respectively, and Genie has the lowest at 3.19${\pm}$0.23. 4. Flow showed the correlation with tear strength but no significant connection to strain-in-compression. Also, there was no significant correlation between the tear strength and strain-in-compression (p<0.05). Making impression to reproduce oral tissue and tooth is an important part of making final restoration. The accuracy of impressions is influenced by the methods of taking impression or other condition. However the property itself of impression materials is the most essential and the materials with proper qualities should be selected.

• 한국실내디자인학회논문집
• /
• 제24권2호
• /
• pp.171-179
• /
• 2015

The aim of this study is to figure out the preference features on design components of shop facade on the basis of the questionnaire survey on short-term memory and sensory memory of human right after an image experiment. As for a preceding research, this study examined the design features of facade into tangible elements and intangible elements, and also classified them into physical, aesthetical, marketing and symbolic components in detail. And, it extracted 5 representative elements in preceding studies including shape, material, pattern, color and sign, which is the standard of a questionnaire survey and preference analysis. The subjects of the experiment were 30 men and women who were over 20 years old majoring interior design. They were exposed to 20 images with 10 seconds respectively through a video, and were asked to respond the questionnaire promptly. The findings of preference analysis of design components of facade including shape, material, pattern, color and sign are as follows. Firstly, shape was the most interesting and attracting component, and designs applied with shape of objects such as 'web', 'drawer', 'wheel' and 'button' obtained high preference. Secondly, as for material, block, steel, exposed concrete board attracted higher preference as memorable materials than other materials. Material was affected by shape, pattern and color. Thirdly, pattern was the most lasting element. Designed pattern had higher preference than simple pattern. Fourthly, as for color, red and green with strong stimulation and attention attained priority having long lasting memory. Fifthly, when visiting a shop, sign out of 5 elements of shape, material, pattern, color and sign drew attention the most. As for the preference of location of sign, 'center top' was the most noticeable. The findings of this study could be utilized for facade design, and also could be used for commercialization considering highly preferred components, and top preference aspects of such elements. advised that to give an impression to customers is important to make a successful design for sales marketing, which, in turn, would lead customers to revisit the shop.

• 환경영향평가
• /
• 제4권3호
• /
• pp.9-13
• /
• 1995

In July 1993 a new prescription of the EC was finished, concerning the voluntary participation of enterprises in a common auditing system. By this in the EC-member countries there must be founded centers of environmental auditing where experienced experts of environmental auditing should be accredited. These accredited experts are controllers for evaluating and certification of carried out environmental-auditings. An environmental-auditing practically represents an environmental assessment for an already existing enterprise with establishing corresponding programmes and strategies for the internal management to improve the environmental relations. Much experiences, which could be collected in the field of EIA during the last years may be transfered to this new task immediately. Only an essential difference there should not be overseen because of national legislation EIA in the defined cases must be carried out. By the EC-prescription carrying out an environmental-auditing for an enterprise is optional, it is recommended only. It was not introduced as a must. In spite of this fact because of the hard competition on the market there will be developed a pressure for the enterprises, to carry out such environmental-auditings. At present already a number of first projects in this direction can be seen, in the first line above all enterprises with the necessary economic power want to use this possibility, to gain better positions on the market. We have already gathered the first experiences in this field. We arranged corresponding contacts to several enterprises within the surroundings of Dresden. Within an opening discussion, where the project is explained and discussed with the management of the enterprise very detailed, the understanding, the readiness and the cooperation for the project are generated necessary prerequesits for the success of the whole work. By means of careful detail-work in collaboration with all departments and on all levels of the enterprise the total mass and energy-balances of the factory established and analysed. There are included also such ranges like material delivery, personal policy, public relations and sale as well as waste management. It is important that all people working in the factory have the feeling to be our partners, and not to have the impression to be checked or controled by an outside organization. This one of the most important factors of environmental auditing, in order to wake up and to develop a common interest on all sides. At the end of the environmental auditing there will be according to the prescription of the EC a catalogue of measures to do immediately, short time, mean time and long time for improvement of the environmental situation of the enterprise. All proposals are made in connection with a corresponding economic evaluation. These measures and programmes are declared as the environmental manual and are the basis for the work of the environmental management of the enterprise for the next three years. According to the EC-prescription, the enterprise with this environmental manual can get a corresponding certificate, which may be used for public relation purposes.

• 한국전통조경학회지
• /
• 제29권4호
• /
• pp.1-13
• /
• 2011

본 연구의 목적은 옛사람들이 '연'이라는 식물소재를 활용한 방법과 그로부터 취하고자 했던 가치와 의미, 감상 태도 등에 대한 실제적 사례들을 고찰하는데 있다. 이를 위한 연구의 방법은 연에 대한 감상과 관념세계가 반영된 시문과 회화를 고찰하고 해석하는 기술(description)적 연구방법이 사용되었다. 본 연구의 결과를 요약하면 다음과 같다. 첫째, 연의 관상 가치는 대규모 집단식재와 부지규모의 소규모 식재, 분연(盆蓮)으로 나누어 볼 수 있었다. 특히 대규모 면적에 집단적으로 식재된 연은 여타의 초화류와 차별화되는 독특한 경관을 제공하였다. 별서와 후원 등 사적인 공간에 연지를 조성하고, 연을 애호한 여러 사례들을 확인할 수 있었다. 이러한 장소는 연이 개화할 무렵에 아회의 장소 등으로 활용되었다. 작은 연지조차 조성하기 어려운 경우에는 분지를 이용하여 연을 즐기기도 하였다. 또 꽃과 잎, 줄기와 연밥 등 세부요소 모두의 관상가치가 뛰어난 점은 연의 또 다른 특징의 하나로 볼 수 있다. 둘째, 주돈이의 '애련설(愛蓮說)'에 '향원익청(香遠益淸)'으로 표현된 향기는 연의 중요한 매력 중 하나이다. 전통정원에 있어서 연은 향기를 제공하는 후각적 요소로 활용되었다. 옛사람들은 연의 향기를 단순히 즐기는 것에 더해 '군자의 품격'에 비유되는 상징물로 여겼으며, 이를 시문과 그림으로 표현하였다. 셋째, 연은 청각적 요소로도 활용되었다. 즉, 수면과 넓은 연잎에 빗방울이 어우러져 내는 소리를 '연당청우(蓮塘廳雨)' 또는 '하당야우(荷塘夜雨)'라 하여 운치 있는 소리로 즐겼다. 넷째, 연꽃을 구경하는 여름놀이를 '세속에 오염된 마음을 씻는다'라는 의미의 세심(洗心)놀이라고 하였다, 이러한 풍류는 일반 서민들로부터 왕가에 이르기까지 폭넓은 계층이 즐겼다. 이 밖에 연과 관련된 풍류로 큰 연잎과 속이 빈 줄기의 특징을 이용하여 술을 마시는 방법인 '벽통주(碧筒酒)' 혹은 '하심주(荷心酒)', 상비주(象鼻酒)가 있다. 또 유교의 영향으로 남녀유별이 엄격하던 조선시대에 연밥과 '채련곡'은 남녀 간의 연애감정을 표현하기 위한 중요한 기호(記號)가 되기도 하였다. 따라서 많은 '채련곡'이 전해지며, 남녀 간의 애정을 묘사한 여러 풍속화에는 연당이 배경으로 등장한다. 연은 고대 이래로 사상과 종교 등 문화적 배경을 초월해 폭 넓은 계층이 애호하여 왔다. 이러한 연유로 인해 연이 갖는 다양한 상징적 의미와 사찰 등 종교시설과 관련된 식재 사례를 다각적으로 고찰하지 못한 점은 본 연구의 한계이며 추후 연구과제이기도 하다.

• 유통과학연구
• /
• 제10권4호
• /
• pp.47-53
• /
• 2012

현대의 많은 기업은 경쟁사에 비해 자사기업의 제품에 대한 긍정적인 이미지를 증대시키기 위해 광고에 많은 노력을 기울여왔고, 최근 들어 멀티미디어의 급속한 발달은 광고의 효용성을 크게 증대시켰다. 이러한 상황에서 최근 소비환경의 급속한 변화는 수많은 브랜드를 양산해내고 있다. 또한 보통 소비자들이 쉽게 접하고 기업의 이미지의 제고를 통하여 시장우위를 점하기 위해서는 광고기법을 많이 활용할 수밖에 없다. 이러한 현대 광고행태는 모델이 차지하고 있는 비중을 더욱 커지게 만들고 있다. 따라서 본 연구는 광고모델의 유형별 특성을 검토해 보고자 하는 것을 목적으로 하였다. 연구를 위한 자료는 20대 이상의 대학생 남녀 230명을 대상으로 2011년 10월 20일부터 11월 5일까지 수집되었다. 또한, 광고모델의 특성이 구매의도와 브랜드 태도에 미치는 영향의 요인을 조사하기 위하여 수집되었으며, 자료의 수집은 20대 대학생 230명을 대상으로 수행하고, 조사방법으로는 설문지조사법을 이용하여 조사요원들이 1부씩 배부하여 회수하는 방법으로 연구를 진행하였다. 40부씩 5가지 모델의 사진이 첨부된 설문지를 통하여 광고모델별의 중점적 특성에 대해 파악한다. 결과를 요악하여 보면 구매의도에 미치는 광고모델의 특성과 브랜드 태도에 미치는 특성은 서로 비슷하지만 상이한 점을 찾아 볼 수 있다. 첫째, 구매의도에 미치는 영향으로는 신뢰성과 효율성이라는 결과가 도출되었다. 구매의사가 강하든 강하지 않든 고객들은 광고를 통한 구매의도의 영향을 받을 때 이 두 가지 특성을 가장 많이 고려한다는 결과이다. 광고를 통한 제품의 신용적인 면과 광고내용의 전달력을 위주로 판단하는 경향으로 드러났다. 둘째, 브랜드태도에 미치는 영향으로는 외향적 특성, 신뢰성, 효율성이라는 결과가 도출되었다. 브랜드 태도는 소비자나 고객이 그 기업에 대해 갖는 태도라고 할 수 있다. 이렇듯 구매 후에도 생성이 되고 소멸이 되는 이 브랜드 태도는 기업이 가장 강구하는 부분이다. 브랜드를 대신하여 광고를 하는 광고모델에 따라 브랜드 태도는 달라진다. 이 점을 유의하여 보았을 때, 광고모델의 외향적인 특성 또한 중요시 된다는 결과가 도출되었다. 따라서, 광고모델의 특성이 구매의도와 브랜드태도의 미치는 영향 중에서 브랜드 태도는 외향적 특성이 추가되어졌다. 이 도출의 결과는 브랜드 태도를 형성하는데 있어서 광고모델의 이미지가 직관된다고 설명이 되어 진다. 이렇듯 고객은 광고를 통해 소비자를 유혹하며, 광고상품에 대해 구매를 끌어당길 수 있다. 하지만 기업의 브랜드에 대한 긍정적인 태도를 확보하기 위하여 광고모델의 외향적인 이미지 또한 중요하다. 예를 들어 박경림은 10년 전 쯤 화장품 광고를 찍은 적이 있었다. 화장품 모델로 활약하며 토크프로그램에서 화장품 광고와 밀접한 말실수를 통해 손해배상을 하게 된 적이 있다. 당시 그 화장품을 구매한 고객들은 고액에 해당되는 금액 환불을 요구하였다. 이렇듯 기업 즉 브랜드의 얼굴을 맡는 역할은 광고모델이라 할 정도로 큰 역할을 하고 있는 것이다. 본 연구의 한계점으로는 대학생을 중심으로 한 점이 가장 큰 한계점이라고 지적할 수 있다. 또한 설문지 수가 230부에 불과하다는 점이 다소 부족함을 느끼게 만드는 요인이다. 더 나아가서, 광범위한 분석이 아니라 세분화하여 구체적인 분석을 도출할 수 있어야 했는데, 그러한 점이 본 연구의 한계점이라 할 수 있다. 향후 연구는 이러한 부족한 부분을 보완하고, 더욱 발전적인 방향으로 논의가 진행될 수 있도록 해야겠다.