• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.9-16
• /
• 2021

Due to the prolonged infectious disease of COVID-19 worldwide, there are various security threats due to network attacks on Internet of Things devices that are vulnerable to telecommuting. Initially, users of Internet of Things devices were exploited for vulnerabilities in Remote Desktop Protocol, spear phishing and APT attacks. Since then, the technology of network attacks has gradually evolved, exploiting the simple service discovery protocol of Internet of Things devices, and DRDoS attacks have continued to increase. Existing SSDPs are accessible to unauthorized devices on the network, resulting in problems with information disclosure and amplification attacks on SSDP servers. To compensate for the problem with the authentication procedure of existing SSDPs, we propose a hash-based SSDP that encrypts server-specific information with hash and adds authentication fields to both Notify and M-Search message packets to determine whether an authorized IoT device is present.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.3
• /
• pp.60-71
• /
• 2017

Smart devices such as smart phones, smart TVs, and smart pads have become essential devices in recent years. As the popularity and demand grows, the performance of smart devices is also getting better and users are dealing with a lot of things such as education and business using smart devices instead of desktop. However, smart devices that still have poor performance compared to desktop, even with improved performance, have difficulty running high performance applications due to limited resources. In this paper, we propose a load balancing algorithm applying the characteristics of smart devices to overcome the resource limitations of devices. in order to verify the algorithm, we implemented the algorithm after adding the distributed processing system service in Android platform. After constructing the cluster on the smart device, various experiments were conducted. Through the analysis of the test results, it is confirmed that the proposed algorithm efficiently improves the overall distributed processing performance by effectively aggregating different amounts of computing resources in heterogeneous smart devices.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.4
• /
• pp.276-283
• /
• 2007

Background: A national health care initiative recommends routine spirometry screening of all smokers over age 45 or patients with respiratory symptoms. In response to the recommendation, new, simple, and inexpensive desktop spirometers for the purpose of promoting widespread spirometric screening were marketed. The performance of these spirometers was evaluated in vivo testing with healthy subjects. However, the clinical setting allows spirometric assessment of various pathologic combinations of flow and volume. Objective: The aim of this study was to compare the accuracy of a desktop spirometer to a standard laboratory spirometer, in a clinical setting with pathologic pulmonary function. Method: In a health check-up center, where screening pulmonary funct test was performed using the HI-801 spirometer. Subjects who revealed the ventilation defect in screening spirometry, performed the spirometry again using the standard Vmax spectra 22d spirometer in a tertiary care hospital pulmonary function laboratory. Pulmonary function test with both spirometer was performed according to the guidelines of the American Thoracic Society. Results: 109 patients were enrolled. Pulmonary function measurements (FVC, $FEV_1$, PEFR, FEF25%-75%) from the HI-801 correlated closely (r=0.94, 0.93, 0.81, 0.84, respectively) with those performed with the Vmax spectra 22d and showed the good limits of agreement and differences between the 2 devices; FVC +0.35 L, $FEV_1$ +0.16 L, PEFR +1.85 L/s, FEF25%-75%-0.13 L/s. With the exception of $FEV_1$, FEF25%-75%, these differences were significant(p<0.05) but small. Conclusion: The HI-801 spirometer is comparable to the standard laboratory spirometer, Vmax spectra 22d, with high accurary for $FEV_1$ and FVC and acceptable differences for clinical use.

• Water Engineering Research
• /
• v.2 no.4
• /
• pp.199-207
• /
• 2001

A computer-assisted desktop is developed for layout design of a concrete gravity dam on the basis of safety and economy. Using a set of regression equations, a dam layout is proposed. With reference to the regression equations and relevant input data, overall dam dimensions are determined by satisfying the stability criteria jointly under usual, unusual, and extreme loading conditions with the desired hydraulic conformity. Among several feasible alternatives, the program enables a designer to select the optimum layout, which corresponds to the minimum total cost of the structure. The method is applied to a case study to examine dimensions of proposed alternatives and to compare them with those of an existing dam.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2534-2539
• /
• 2007

Launch vehicles are exposed to aerodynamic heating conditions while flying at high Mach numbers in the atmosphere. In this study aerodynamic heating test for fairing nose-cone was done using ATSF(Aerodynamic Thermal Simulation Facility) and Engineering Model for fairing. ATSF is a facility that can simulate given temperature profile using about 4,000 halogen heaters on fairing model. Aerodynamic heating profile is got from result of thermal analysis using MINIVER, Thermal Desktop and SINDA/FLUINT. After aerodynamic heat test, it is found that initial temperature of fairing inner surface and thickness of BMS has important effects on temperature of fairing inner surface. Also it is confirmed that maximum temperature of fairing nose-cone inner surface during flight is lower than allowable temperature limit. Later, thermal correlation between thermal analysis and experimental results will be done using aerodynamic heating test result

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.299-301
• /
• 2012

본 논문에서는 3D SW와 같은 고사양의 SW를 서버 기반의 온라인 SW 서비스로 제공하기 위하여 클라이언트의 GPU를 사용하여 그래픽 분할 실행 서비스를 제공하기 위한 데스크탑 창의 가상화에 대하여 소개한다. 그래픽 분할 실행은 서버에서 SW를 구동하고 실행되는 SW의 데이터 집중적인 작업은 서버에서 실행하고, 그래픽 작업들은 서버에서 처리되지 않고, GPU 가상화를 이용하여 클라이언트의 GPU에서 처리하여 SW를 서비스하는 방법이다. 이를 위하여 본 논문에서는 3D 그래픽 정보의 클라이언트 렌더링을 API 리모팅을 이용하여 처리하는 방법에 대하여 소개하고, 실행되는 SW의 2D 그래픽 기반 윈도우를 서버의 윈도우 관리 시스템에 독립적으로 클라이언트 PC에서 가상화하여 처리하는 방법을 제안한다. 또한, 제안된 방법이 서버의 창 관리 시스템에 종속적인 경우와 비교하여 사용자에게 유연한 서비스를 제공함을 알아본다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2012

In this paper, we proposed and developed a fast and efficient real time face detection and recognition which can be run on embedded system instead of high performance desktop. In the face detection process, we detect a face by finding eye part which is one of the most salient facial features after applying various image processing methods, then in the face recognition, we finally recognize the face by comparing the current face with the prepared face database using a template matching algorithm. Also we optimized the algorithm in our system to be successfully used in the embedded system, and performed the face detection and recognition experiments on the embedded board to verify the performance. The developed method can be applied to automatic door, mobile computing environment and various robot.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.425-430
• /
• 2006

현재 대부분의 데스크탑 시스템에서 사용자는 단지 하나의 마우스를 사용해서 컴퓨터와 상호작용을 하고 있다. 본 논문에서는 각각의 손으로 동시에 두 개의 마우스들을 사용할 때, 작업 성능에 대한 효과를 살펴보고자 한다. 본 논문에서의 실험에서는 데스크탑 환경에 기반한 간단한 게임 (날아오는 총알 피하기와 잡기)에서 세 개의 독립 변수들로 한 손 또는 양 손 사용 여부, 주위 상황(총알)의 변화 속도, 그리고 두 커서(캐릭터)들간의 거리 차이를 사용하고, 종속 변수로 사용자의 작업 성능(부딪친 총알 개수)을 측정하였다. 실험 결과에 의하면, 두 커서 (또는 두 캐릭터)와의 동시 상호작용이 필요할 때 한 손보다는 양 손을 사용할 때의 작업 성능이 통계적으로 유의하게 좋았고, 두 커서 사이에 거리가 멀수록, 그리고 총알의 속도가 느릴수록 작업 성능은 유의하게 좋았다. 독립 변수들 사이에는 서로 유의한 교호작용이 나타나지 않았는데, 이것은 작업 성능에 대한 양손의 효과가 다른 독립 변수들의 각 레벨과는 상관이 없었다는 것을 의미한다.

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.360-367
• /
• 2005

The injection-molded plastic parts have many surface defects: warpage, weldline, flowmark, zetting, scratching, shading and so on. As weldline was one of the major surface defects in the case of desktop monitor, warpage and surface shrinkage are the bigger problems of LCD monitor in the pursuit of light weight and thinner thickness of parts. Some measures to improve these defects were introduced in this paper. Based on these, the laboratory work to find out the optimum processing conditions and to get the best parts was repeated injection moulding try-out after reflecting these improvements. The defects of warpage and surface shrinkage was significantly improved after the improvements in the case of the 20.1 inch even if in the 15 and 17inch case the warpage size was a lttle over the allowed specification because of not taking the measure for parts design within the allowable limits from the required specification in the cause of cost down.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.15-18
• /
• 1998

Most existing FRADs support only permanent virtual circuit-based frame relay services. But several applications such as intranets, desktop video conferencing, remote access and voice applications typically do not require the dedicated bandwidth capabilities of PVCs because connections are only occasionally needed. So it drives the need of switched virtual circuit-based FRADs which offer potentail cost savings associated with dynamic bandwidth on demand connectivity. In this paper, we describe Frame Relay Network Access System(FNAS) that provides switched virtual circuit-based frame relay access for dial-up Internet services. The hardware configuration, software architecture and call processing flow of FNAS is explained.