• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.36-41
• /
• 2005

The effects of low temperature plasma treatment on the properties of three types of foams, polyurethane(PU), injection phylon(IP), and phylon(PH) that used for footwear mid-sole were examined. The change of surface properties of foams were characterized by electron scanning microscope, contact angle measurement, and universal testing machine. Adhesion was tested by T-peel tests of plasma treated foams/polyurethane adhesive joints. The contact angle of three types of foams were decreased dramatically with the plasma treatment time, specifically noticeable in the case of phylon(Ph). It has shown the relationship with the contact angle of phylon(PH) and the distance between electrode and samples. The peel strength of foams were increased with the increase of plasma treatment time.

• Journal of Distribution Science
• /
• v.21 no.4
• /
• pp.47-56
• /
• 2023

Purpose: the research aims to analyze the impact of the distribution of knowledge through online learning on the intellectual potential of PhD students and produce recommendations for policy to improve intellectual capacity. During the literature review, it was determined that a large number of studies examined the impact of online learning on the quality of education at different levels. Research design, data and methodology: the research methodology is based on subjective assessment and studying the students' opinions. The basis of the study was a comprehensive analysis of primary data obtained through a sociological survey of PhD students. 324 respondents from humanitarian, medical and natural faculties participated in the survey. Results: the study revealed that online learning helps increase students' intellectual potential. PhD students had a positive attitude towards the transition from traditional education to online learning. It should be noted that, according to the results, the most popular gadgets were laptops and smartphones, which were characterized by high mobility and ease of use. Based on the obtained results, recommendations were developed for the formation of online learning with a focus on increasing students' intellectual potential. Conclusions: based on the results of the assessment of educational and innovative potential, policy recommendations and further research in this area were proposed.

• Korean Institute of Interior Design Journal
• /
• v.25 no.5
• /
• pp.63-70
• /
• 2016

Modern society is suffering from the phenomena of low-fertile, ultra-aging, and low-growth. On this social flow, most social classes undergo vulnerable situation and their overall housing and living condition have difficulties. So far many housing guidelines for diverse population were developed, recently, inclusive 'Customized Housing Design Guideline for Childcare Families' in terms of maintaining family and society has been completed. The purpose of this study is to analyze User Benefit Characteristics of 'Customized Housing Design Guideline for Childcare Families'. The research subjects are essential 140 guidelines appropriate to children's development and parents' care. The research method is contents analysis and the analysis criterion are 4 concepts of the User Benefit Criteria- 'Behavioral Facilitation (BF)', 'Physiological Maintenance (PhM)', 'Perceptual Maintenance (PM)', 'Social Facilitation (SF)'. 3 people inter-raters reliability was established. Altogether, the guidelines were rated in the order of PhM>PM>BF>SF, and these characteristics are similar as common universal design guidelines. This showed the supportability of spatial characteristics in the guidelines related to user's special behaviors. Also, the results show the importance of outdoor space planning for safe social interactions. The supportable characteristics of 'Customized Housing Design Guideline for Childcare Families' could be expected to efficiently apply for new housing development in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.883-888
• /
• 2007

Investigation of improving the properties of UV detector which uses the wide bandgap of ZnO are under active progress. The present study focused on the design and fabrication of i-ZnO/p-inversion $layer/n^--Si$ Epi. which is characterized with very thin p-type inversion layer for UV detectors. The i-ZnO thin film for achieving p-inversion layer which was grown by RF sputtering at $450^{\circ}C$ and then annealed at $400^{\circ}C$ in $O_2$ gas for 20 min shows good intrinsic properties. High (0002) peak intensity of the i-ZnO film is shown on XRD spectrum and it is confirmed by XPS analysis that the ratio of Zn : O of the i-ZnO film is nearly 1 : 1. Measurement shows high transmission of 79.5 % in UV range (< 400 nm) for the i-ZnO film. Measurement of $V_r-I_{ph}$ shows high UV photo-current of 1.2 mA under the reverse bias of 30 V.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.133-142
• /
• 1992

The slow strain-rate test($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$) was performed to understand the tensile properties of chopped strand glass mat/polyester composite in air and synthetic sea water. (pH 6.0, 8.2, 10.0) For the tested composite subjected to tensile loading in air and synthetic sea water (ph 6.0, 8.2, 10.0), the tensile properties are a little decreased as strain rate decrease and a little decrease in stiffness is observed in $1{\times}10^{-7}sec^{-1}$. The tensile properties were some changed in case the pH value in synthetic sea water is varied.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1569-1574
• /
• 2005

To develop new hole-blocking materials for phosphorescent organic light-emitting diodes (PhOLEDs), 5,6-dihydro-2,9-diisopropyl-4,7-diphenyl[1,10]phenanthroline (1) and 5,6-dihydro-2,9-diisopropyl-4-(4-methoxyphenyl)-7-phenyl[1,10]phenanthroline (2) were synthesized. While the absorption spectrum of 1 is very similar to that of 2, the photoluminescence spectrum of 1 has the feature of the narrower and blue-shifted blueviolet emission at the peak of 356 nm compared to that of 2. The HOMO and LUMO energy levels of 1 and 2 were estimated from the measurement of cyclic voltammetry, and 1 has the appropriate levels for a holeblocking layer (HBL). The use of 1 as a HBL in a green PhOLED led to good efficiency of 23.6 cd/A at 4.4 mA/$cm^2$.

• Korean Institute of Interior Design Journal
• /
• v.26 no.2
• /
• pp.72-82
• /
• 2017

Current world population is rapidly ageing and the disabled population is expected to age seriously as well. The concern about the elderly and the disabled is increased largely not just the field of social welfare and service but the housing planning where the physical environment of everyday life is. Recently in Ireland, 'Universal Design Guideline for Homes' is established and proposed in public. It is considered as initial and special national policy for the socially venerable. The purpose of this research is to analyze the User Benefit Characteristics(UBC) of 'Universal Design Guideline for Homes in Ireland' and clearly organize the characteristics for comprehensive communication. The research subjects are 444 guidelines of 'Universal Design Guideline for Homes in Ireland.' The research is conducted by contents analysis technique, and each guideline is analyzed by the 4 main concepts of UBC- 'Behavioral Facilitation(BF)', 'Physiological Maintenance(PhM)', 'Perceptual Maintenance(PM)', 'Social Facilitation(SF).' As results, the User Benefit Characteristic of 'Universal Design Guideline for Homes in Ireland' is ordered by PhM>PM>BF>SF. The design guidelines are supposed to support ageing in place and sustainable living in the existing houses even though people are ageing or being disabled. 'Universal Design Guideline for Homes in Ireland' supports safe behavior and comfort cognition especially in indoor and surrounding outdoor environment. This research is significant for sharing the knowledge and comprehension of decreasing environmental stress of the elderly in specific, and could be utilized for developing new elderly housing in future.

• Communications for Statistical Applications and Methods
• /
• v.6 no.1
• /
• pp.107-116
• /
• 1999

We propose a sample design which minimize Bayes risk for cluster smpling in sampling inspection. We treat a pilot sample and an additional sample size as random variable. In addition we compute an appropriate cluster size for handling over-dispersion.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.2
• /
• pp.117-130
• /
• 2001

Investigations of low-rice unbounded reinforced concrete shear walls with or without openings are performed with comparison of analytical and experimental results. Theoretical analysis is based on nonlinear finite element algorithm, which incorporates concrete failure criterion and nonlinear constitutive relationships. Studios focus on the effects of height-to-length ratio of shear walls, opening ratio, horizontal and vertical reinforcement radios, and diagonal reinforcement. Analytical solutions conform well with experimental results. Equations for cracking, yielding and ultimate loads with corresponding lateral displacements are derived by regression using analytical results and experimental data. Also, failure modes of low-rise unbounded shear walls are theoretically investigated. An explanation of change in failure mode is ascertained by comparing analytical results and ACI code equations. Shear-flexural failure can be obtained with additional flexural reinforcement to increase a wall's capacity. This concept leads to a design method of reducing flexural reinforcement in low-rise bounded solid shear wall's. Avoidance of shear failure as well as less reinforcement congestion leer these walls is expected.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.4
• /
• pp.1-10
• /
• 2006

In This paper, the settlements of soft ground and the undrained shear strength were compared for verify the improvement effect of PBD method, completed in the Busan New Port phase 1-1 site. Through the describing of design cases with the PBD method, the effects of the improvement method with CPT data were evaluated comparing with measured results. We expect that the output from this research is useful in future for design and analysis when similar soft grounds are planned to be used.