• International Journal of Computer Science & Network Security
• /
• v.23 no.11
• /
• pp.8-20
• /
• 2023

The current study aims to determine digital transformation (organizational, technical, and human resources) requirements at Saudi universities from Umm Al-Qura University faculty members' perspectives. The researcher used a quantitative approach based on the descriptive analytical design. To answer the questions of the study, the researcher used the questionnaire as a data collection tool. The questionnaire was sent electronically to faculty members working in colleges and institutes affiliated with Umm Al-Qura University in Makkah Al-Mukarramah, Saudi Arabia. The questionnaire consisted of the three dimensions of digital transformation: organizational; technical; and human resources requirements. The results showed that requirements related to human resources came first with an average of 2.25 then the organizational requirements with an average of 1.95, and in the last, technical requirements came with an average of 1.64. In addition, some suggestions were given by the participants (faculty members) related to the mechanism that could contribute to implementing digital transformation at Saudi universities. Likewise, at the end of the study, the researcher has given some suggestions related to the implementation of digital transformation requirements at Saudi universities.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.388-403
• /
• 2018

We investigated design requirements of vent lines for Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor. We developed design requirements of areas of the rupture disks of the steam generator, a diameter of the gas vent line of the sodium dump tank, a diameter of the gas vent line of the water dump tank, a diameter of the water dump line of the steam generator. With the design requirements, we calculated the time to vent fluid inside the steam generator and analyzed the transient pressure behavior, also evaluated the close pressure value of the isolation valve of the water dump line. Our results are expected to be used as basis information to design Sodium-Water Reaction Pressure Relief System of Prototype Generation IV Sodium-Cooled Fast Reactor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.555-560
• /
• 2002

This paper addresses the methodologies for manufacturing systems design. While a number of design methods are used in product or part design, methods for manufacturing systems design are rarely known. Two approaches, simulation and axiomatic design theory, are discussed with respective case examples. The usual purpose of using simulation is to identify the bottleneck of a manufacturing system or to evaluate its performance with the aim of configuring the manufacturing system. The simulation typically proceeds in steps such as problem definition, model building, numerical experimentation, analysis and evaluation. The axiomatic design method transforms customer attributes into functional requirements and repeats mapping processes between functional domain and physical one until a satisfactory level of refinement of the functional requirements and the design parameters is reached. Possible design alternatives are evaluated by applying the independence axiom as well as the information axiom.

• Architectural research
• /
• v.17 no.3
• /
• pp.83-91
• /
• 2015

A comprehensive understanding of functions and performances enables a selection of appropriate alternatives to the existing design and can prevent defective design. A performance-based design quality management can ensure successful project completion. This study proposes a new model for design quality management in order to prevent defective design and to minimize design change. The new quality management model defines the requirement about function and performance based on technical characteristic, and assesses suitability for design alternatives. This study attempts to propose a quality matrix assessment method that can compare the alternative design and requirements defined with the new quality management model. This method can judge conformity and suitability of design quality in accordance with the requirements configured.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1549-1554
• /
• 2018

Recently the design of railway systems have been performed, based on the analysis of operational conditions and service targets, it is to optimize the effectiveness and efficiency of system operation. Many RAMS requirements have been developed to transform operation conditions into system design characteristics. However, our railway industry has not actived the application of RAMS into system design performance. According to short of RAMS application, many technologies that have been developed are not only applied the existing systems that is operating, but also have not succeed to apply for new systems. In order to design the effective and efficient railway systems that are optimized to operation conditions and service targets, a systems approach and RAMS management are necessary in railway development, operation and maintenance. Therefore, in this study, the RAMS performance requirement design methods are discussed. the allocation methods from system level to each devices of subsystems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.157-167
• /
• 2008

Through this study, the standard design guidelines for high speed train with power cars have been derived to meet the crashworthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulation requires some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 kph, and a collision against a standard deformable obstacle of 15 ton at 110 kph. A standard high speed train composition was defined as 2PC-2ET-6T with 17ton axle load, similar to KTX-2 for the Honam express line. Using theoretical and numerical analyses, some crashworthy design guidelines were derived in terms of mean crush forces and energy absorptions for major crushable components. The derived design guidelines were evaluated and improved using one dimensional spring-mass dynamic simulation. It is shown from the simulation results that the suggested design guidelines can easily satisfy the domestic crashworthiness requirements.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.26-39
• /
• 2006

A synthetic aperture radar (SAR) system can provide all-weather, day and night imaging capability, and thus, is very useful in surveillance for both civil and military applications. In this paper, the X-band spaceborne SAR system design procedure is introduced with the key design parameters for mission and system requirements characterized by the small satellite platform. The SAR imaging mode design technique is presented, and the design results are analyzed for standard mode performance evaluation. In line with the system requirements, the X-band SAR payload and ground reception/processing sub-systems are presented with the key design results and image applications examples. The designed small satellite SAR system shows the wide range of imaging capability, and proves to be an effective surveillance system in light-weight, high-performance and cost-effective points of view.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.426-432
• /
• 2013

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. Particularly, architectural information is generated and managed through the life cycle of a building, from conceptual design stage to the construction and maintenance. A Building Information Model (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. BIM technology accomplished quantitative development being utilized in various disciplines. However, it is necessary to develop environment and requirement for qualitative improvement of BIM based project. Particularly, requirement is very important for architectural design evaluations. The purpose of this study is to develop and apply of quality control requirement for improving the quality of architectural design in open BIM environments. To achieve this purpose, the authors have investigated case study for open BIM data quality control (software, guideline and application case) and classified quality control targets according to physical/logical quality and data quality. In addition, the authors have defined open BIM based quality control process and developed quality control requirements. Finally, the authors have developed rule based quality check system using requirements for efficient quality control based on open BIM.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.123-126
• /
• 2005

We develop the evaluation method of functional requirements for excavator design. The functional requirement of the product can be deduced from voice of customer. QFD method is used in order to convert customer requirement to functional requirement. The measure of information index is used to evaluate quantitatively the product quality characteristics. The correlation score between customer requirements and functional requirements and benchmarking score of competitors are basic data for the measure of information.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.1
• /
• pp.67-72
• /
• 2009

User Requirements are analyzed and quantified by decision making models and system engineering methods to select alternative concepts which satisfy the various requirements. In this study, the design concepts for guided missile are derived using Quality Function Deployment(QFD) and Analytic Hierarchy Process(AHP). The design alternatives that satisfy the user requirements are extracted by QFD and Morphological Matrix, then the best design concept are obtained using AHP and Pugh concept Selection.