• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.106-108
• /
• 2008

This paper deals with the design for speed controller to drive PMSM by matrix converter without DC-link circuit as the power conversion system of AC servo motor drive. To design the speed controller of PMSM drive, the closed-loop transfer function of speed controller is calculated and then the frequency-domain response characteristics are analyzed by bode plot using Matlab. Based on the results by bode plot, the speed control gains are determined. As the real effects of controller designed in the frequency-domain display in the time-domain, the performance of speed controller is confirmed by the step response of speed controller. The design examples are shown and its validity of the design method mentioned in the paper is verified through PSIM simulation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.97-107
• /
• 2015

Research was initiated to investigate a vegetation characteristics of the species of ground cover plants mixed with herbeceous and woody plants on a cut slope. 4 different ground cover plants (Miscanthus sinensis var. purpurascens, Pennisetum alopecuroides, Festuca arundinacea and Zoysia japonica) were seeded at the same rate of $10.0g/m^2$ with herbaceous plants (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena, Chrysanthemum zawadskii and Coreopsis drummondii L) at the total seeding rate of $7.5g/m^2$ and native woody plants (Lespedeza bicolor Turcz, Indigofera pseudo-tinctoria and Albizzia julibrissin) at the total seeding rate of $7.5g/m^2$, respectively. This experiment was treated with 3 replications on a randomized block design. Data such as surface coverage rate(%), the germinating number, plant height and visual quality were analyzed. There were no statistic differences observed in the soil hardness and the soil moisture content while a significant difference was observed in the surface coverage rate and the germinating number. The surface coverage rate and the germinating number were significantly high in the Pennisetum alopecuroides plot when compared with the Miscanthus sinensis var. purpurascens plot, the Festuca arundinacea plot and the Zoysia japonica plot, respectively from the viewpoint of ground covers. Especially, the surface coverage rate was considerably low in the Festuca arundinacea plot. However, the surface coverage rate and the germinating number were no statistic differences observed in this treatment from the viewpoint of herbaceous and woody plants. Also, both of the plant height and visual quality were high in the Pennisetum alopecuroides plot when compared with the Miscanthus sinensis var. purpurascens plot, the Festuca arundinacea plot and the Zoysia japonica plot, respectively. We concluded that Pennisetum alopecuroides was the optimum plant from the treated ground covers mixed with native woody and herbaceous plants for the balanced emergence from the viewpoint of the ecological slope vegetation.

• Journal of Popular Narrative
• /
• v.26 no.3
• /
• pp.255-288
• /
• 2020

The purpose of this study is to propose 'plot lamination methodology' for planning and analyzing of storytelling. The story contents with a certain volume of narrative might have several important characters. Most of the characters have meaningful influences on the context of the story through their choices and actions as they go through dynamic changes to construct and deconstruct relationships. The plot lamination methodology is the result of an attempt to look at the process from the 'strategic' point of view by focusing on the fact that the main characters with supplementary nature contribute to the independent formation of subplot based on the main plot driven by the protagonist. Regardless of how they live their own unique and autonomous life in the narrative, the main characters hold a relatively subordinate position within the centripetal force of the main plot. Their journeys tend to expand/emphasize/divide up the process of the main plot's 'persuasion via causality,' and also individualize into the functions of emotional sympathy (pathos), moral, ethical perspective (ethos), and rational logic (logos). As such, the subplots of main characters are laminated according to these three functional traits, which could become multi-layered through second or third laminations, depending on the number and roles of other characters. If the plot lamination methodology is further developed through follow-up studies, it will open up the possibilities of the strategic design (planning) and aesthetic criticism (analysis) regarding the procedure of conjugation /branching of subplot and/from the main plot.

• Communications for Statistical Applications and Methods
• /
• v.4 no.1
• /
• pp.139-149
• /
• 1997

For split plot designs exact univariate F tests of the within-subjects main effect are based on the assumption of multisample sphericity. Type I error rates and power are reported for the F test and two tests designed for use when multisample sphericity is violated: the $\widetilde{\xi}$-adjusted test and the Corrected Improved General Approximation(CIGA) test.The results indicate that even though the F test and the $\widetilde{\xi}$-adjusted test have better power than the CIGA test in some conditions, the F test and the $\widetilde{\xi}$-adjusted test do not control Type I error rates when the design is unbalanced and the F test dose not have a good control of Type I error rates when sphericity assumption is severely violated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.513-518
• /
• 2001

As the machining depth increases, the drilling torque increases and fluctuates and the risk of drill failure also increases. Hence, drilling torque control is very important to prevent the drill from failure. In this study, a PID controller was designed to control the drilling torque in a machining center. The plant including the feed drive system, cutting process, and spindle system was modeled for controller design. The Ziegler-Nichols rule was used to determine the controller gain and control action times. The root locus plot was used to tune the controller gain for a certain cutting condition. Also, suggested was a simple method to obtain the tuned controller gain for an arbitrary cutting condition not using the Ziegler-Nichols rule and root locus plot. The cutting torque control, performance of the designed controller and the effect of gain tuning on the control performance were examined.

• Journal of Plant Biology
• /
• v.19 no.2
• /
• pp.37-40
• /
• 1976

The experiment designed to obtain information relative to the favourable levels to apply N.P.K fertilizer was conducted at the hop garden of College of Agriculture, S.N.U. in 1975. The varieties used were 1-year-old Cascade, Hallertau and Shinshuwase. The design of the experiment was a split plot design with 3 replications. Yields were recorded as fresh weight of harvested cones in gram per split plot. The results obtained from the experiment were as follows: 1. The results from analysis of the data for 3 varieties indicated that significant increase in yield were found due to the application of 46g N, 20g P2O5 and 60kg K2O per plant, although higher level thn the above caused a remarkable reduction of yield. 2. The individual fresh weight of harvested cones was significantly increased with application of nitrogen, phosphorus and potash, regardless of fertilizer levels. 3. Analysis of variance for yields showed that there were no significant interaction between fertilizer level and variety, i.e., all varieties used might require the same fertilizer level.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.295-299
• /
• 2008

This paper discusses tests of factor effect or contrast by the use of saturated design $k^n$ factorial design. The nine nonparametric rank measures in normality test using normal probability pot are proposed. Length's PSE(Pseduo Standard Error) test [4] which relies on the concept of effect sparsity is also introduced and extended to the margin of error(ME) and Simultaneous margin of error(SME).

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.127-135
• /
• 2008

The mission of the Forest Inventory and Analyis (FIA) program of the Forest Service, U.S. Department of Agriculture, is to conduct the national forest inventory of the United States of America for purposes of estimating the area of forest land; the volume, growth, and removal of forest resources; and the health of the forest. Users of FIA data, estimates, and related products include land managers, policy and decision-makers, forest industry, environmental organizations, and university researchers. To accomplish its mission, the FIA program has established a sampling design with an intensity of approximately one permanent plot per 2,400 ha across the entire country. Depending on the region of the country, each plot is remeasured at intervals of five or 10 years. The program releases data annually and reports estimates at the county level for each state every five years. Due to budgetary constraints and natural variability among plot observations, sufficient numbers of plots cannot be measured to satisfy precision guidelines for the estimates of many variables unless the estimation process is enhanced using ancillary data. Classified satellite imagery has been demonstrated to be a source of ancillary data that can be used with stratified estimation techniques to increase the precision of estimates with little corresponding increase in costs. A crucial factor restricting the utility of FIA data is that the exact locations of inventory plots cannot be released to the public. Thus, users are generally not able to obtain estimates for small areas or for their own areas of interest if exact plot locations are required. To compensate, satellite imagery, inventory plot data, and the k-Nearest Neighbors technique are being used to construct Internet-based maps of forest attributes from which estimates for arbitrary user-defined areas of interest may be obtained.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.43-52
• /
• 2019

The purpose of this study is to classify the building layout and plan types according to the urban location, use and function of civil and to analyze the characteristics by the type classified. After constructing a framework (Mathia type, Nagaya type, Detached House type) for analyzing Modern Private Housing Architecture in Gunsan, the research was conducted on 30 representative buildings, and a plot plan, a floor plan and elevation were created. After analyzing the relationship between the lot of land and the urban street, we classified the type of arrangement into Mathia type and Nagaya type which directly enter the building from the road, and derived the Detached House type which indirectly enters from the road. When we look at the use of the derived arrangement types, most of the Mathia type are commercial and residential buildings, and some of them are specially designed for commercial buildings. The Nagaya type appears in the form of commercial and residential house or residential private house, and the Detached House type is classified as residential style. As a relation with the urban street, the Mathia type and the Nagaya type are generally located on the main urban street, whereas the Detached House type is located on the small urban street. As a result of analyzing, the floor plan was changed according to the plot plan. The plan of the Mathia and Nagaya type are arranged to enter directly from the street, with commercial space being mainly located on the street, and the residential space being composed on the back or the second floor. the plan of the Detached House is a type that enters indirectly into the interior through a separate space (Courtyard), and forms an organic space between the residential interior and the front and rear yard. The purpose of this study is to investigate the Characteristics of a plot plan and a floor plan of Modern Private Housing Architecture in Gunsan by means of analysis considering the urban street, Uses of buildings, Construction method and the yard through actual measurement.

• Journal of the Korean Statistical Society
• /
• v.14 no.2
• /
• pp.100-117
• /
• 1985

This paper describes an outline of the sampling design for crop area survey and product survey in Korea. The design attempts to from a double statification, to obtain an efficient allocation of the sample and to reduce the sampling error by establishign crop concentrated strata. The optimum numbers of sample field and sample plot are investigated. The design is made it possible to reduce the sampling errors as well as to reduce the sample size further than the present survey.