• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.143-152
• /
• 2017

Restriction of completely randomization within a block can be handled by a split plot factorial design splitted by several plots. $3{\times}3$ split plot factorial design with two fixed main factors and one fixed block shows that powers of the rank transformed statistic for testing whole plot factorial effect and split plot factorial effect are superior to those of the parametric statistic when existing effect size is small or the remaining effect size is relatively smaller than the testing factorial effect size. Powers of the rank transformed statistic show relatively high level for exponential and double exponential distributions, whereas powers of the parametric and rank transformed statistic maintain similar level for normal and uniform distributions. Powers of the parametric and rank transformed statistic with two fixed main factors and one random block are respectively lower than those with all fixed factors. Powers of the parametric andrank transformed statistic for testing split plot factorial effect with two fixed main factors and one random block are slightly lower than those for testing whole plot factorial effect, but powers of the rank transformed statistic show comparative advantage over those of the parametric statistic.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.27-31
• /
• 2011

In many industrial experiments, some practical constraints often force factors in an experiment to be much harder to change than others. Such an experiment involves randomization restrictions and it can be thought of as split-plot experiment. This paper investigates the path of steepest ascent/descent within a split-plot structure. A method is proposed for calculating the coordinates along the path.

• Water for future
• /
• v.10 no.2
• /
• pp.81-90
• /
• 1977

The research is conducted to study the effect of the soil physical properties in the direct sowing culture on the water requirement, growth, and yield of rice with Early-Tongil at the experimental paddy field of the Sangju agri. and seri. junior college in Keyngbuk province from 6th May to 15th September in 1977. The experimental plots are designed with the four plots which are non-irrigated standard (plowing to 15cm), non-irrigated deep lowed (plowing to 25cm), irrigated standard (plowing to 15cm), and irrigated deep plowing plot (plowing to 25cm) and also each plot is repreated four times by the split plot design. The results obtained are summarized as follows: 1) The soil sample was ML to 10cm depth from ground surface and those from 10cm to 20cm depth and from 20cm to 30cm were CL. Each specific gravity was 2. 6, 2. 6 and 2. 7. 2) The weather during culturing period was the sane as the normal year of mean temperature. The precipitation was little and the distribution of it was disordered comparing to normal year but the heavy sunshine gave good effect on ripening. 3) Percolation loss was increased more at the non-irrigated plot than at the irrigated plot, and that of deep-plowed plot was increased more. 4) Grain yield per 10a. of non-irrigated deep plowed plot was 898kg, it was greated than others but there wa no significance. 5) A significant difference in the number of spikelets per panicle was found between nonirrigated plot and irrigated plot, and the number of spiklelets per panicle at the nonirrigated plot was more than that of the irrigated plot. But there was no significance in the other yield components-number of panicle, fertility abd ripening ratio-at the irrigated plot, ut weight of 100 grains was higher at non-irrigated plot. 6) Yield and growth at the deep plowed plot were higher than those of standard plowed plot.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1686-1696
• /
• 2022

The impedance matching circuit design technique based on the phasor plot introduced in this paper is based on the impedance triangle of electric circuit. It is a technique that designs through the construction of a phasor figure using the values given to the matching circuit design. The design pattern is based on L-type, inverted L-type, T-type, and 𝜋-type, and unknown reactance elements are determined through phasor shapes. In this paper, using a design by phasor plot, we design several cases, such as the case where the input and output ports are pure resistance and have reactance. It was confirmed that the design value was verified by serial-parallel equivalent conversion to achieve matching. This design technique can immediately grasp the phase or size of input/output power, so it is expected to be applied mainly in a low frequency band due to rapid design change and application.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.651-658
• /
• 2018

Purpose: The algorithm described in Lim(1998) is available to determine the sample size directly given specified significance level, power and signal-to-noise ratio. We research on the efficient determination of the sample size by visual methods. Methods: We propose three graphs for investigating the mutual relationship between the sample size r, power $1-{\beta}$ and the detectable signal-to-noise ratio ${\Delta}$. First graph shows the relationship between ${\Delta}$ and $1-{\beta}$ for the given r and it can be checked whether the power is sufficient enough. Second graph shows the relationship between r and ${\Delta}$ for the given power $1-{\beta}$. Third graph shows the relationship between r and $1-{\beta}$ for the given ${\Delta}$. It can be checked that which effects are sensitive to the efficient sample size by investigating those graphs. Results: In factorial design, randomized block design and the split plot design how to determine the sample size directly given specified significance level, power and signal-to-noise ratio is programmed by using R. A experiment to study the split plot design in Hicks(1982) is used as an example. We compare the sample sizes calculated by randomized block design with those by split plot design. By using graphs, we can check the possibility of reducing the sample size efficiently. Conclusion: The proposed visual methods can help an engineer to make a proper plan to reduce the sample size.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.271-272
• /
• 2006

This paper presented a new experimental gain tuning technique for a Multi-Axis Servo System. First, the investigation for proportional gain of velocity control loop by using a Dynamic Signal Analyzer (DSA) was performed. Using the FUNCTION characteristic of DSA based on the Bode plot, the Bode plot of open loop transfer function was obtained. In turn, the integral gain of a servo controller can be found out by using the Integration time constant extracted from the Bode plot of open loop transfer function. In the meanwhile, the positional gain of the servo controller has been obtained by using the Bode plot of the closed loop transfer function. We have also proposed the technique to find out an optimal parameter of a notch filter, which has a great influence on vibration reduction, by using the damping factor extracted from the Bode plot of closed loop transfer function.

• The Korean Journal of Ecology
• /
• v.9 no.3
• /
• pp.161-184
• /
• 1986

An experiment was made in order to analyze the growth characteristics and productivity of Zoysia japonica under control, mowing and TIBA treatment conditions at the experimental farm of Kyung Hee univ. from May 26 to Oct. 1 in 1985. The field was planned by the randomized block design method and each treatment was given to three plots (2${\times}$2, 4${\times}$4 and 10${\times}$10 cm) and was replicated three times. Each plot was 1$m^2$ for Zoysia japonica. The sampling of each plot was taken once a week after sowing. In order to know the dry matter of total standing crops, kept 9$0^{\circ}C$ and weighted each organ of the plants. Total leaf area of a plant was measured by drawing method. The author adopted the growth analysis of English School. The increasing rates of numbers of leaf and stem were remarkably high in each plot between 10th and 12th weak after sowing and it was highest in TIBA treated plot. The increasin rate of leaf area in each plot was remarkably high beween 10th and 12th week and the maximum value of leaf area was 274.00c$m^2$ in TIBA treated plot of 100 plants/$m^2$. The increasing rate of standing crop was remarkably high between 10th and 12th week and the high increasing tendency in TIBA plot resulted from TIBA. The positive correlationship was founded between standing crop and leaf area. The evaporation rather than temperature acted as a main factor of negative correlation with standing crop during the experiment period. Solar radiation had a high positive correlation in the lower density of plot. C/F ratio was low, during the growth period, from 10th to 12th week after sowing and was low in the higher density under each treated plot. T/R ratio was not constant during the sampling period but was high in the lower density. The increasing rates of RGR and NAR were high between 11th and 12th week after sowing. Leaf area ratio was high in higher density in each plot and not constant in all treated plot.

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.187-191
• /
• 1994

A mixed forest community in Tokyusan was studied to determine the adequate plot area of tree stratum for investigating forest community structure. Nineteen nested plots were set up in the studied forest community, and species-area curve and performance curve were established. According to species-area curve, the minimum plot area where a given percentage increase in plot area produced less than the same percentage increase in number of species was 500$m^2$. The minimum plot area where a given percentage increase in plot area produced less than the half of the percentage increase in number of species was 1,000$m^2$. According to performance curve of the importance values of the major species, the minimum plot area where the importance value of the major species was distinguished from each other was 900$m^2$, and the minimum plot area was 500$m^2$ except for a big tree of Pinus densiflora distributed unexpectedly. According to performance curve of species diversity, the minimum plot area was 400$m^2$. Similarity indices between plot area above 900$m^2$ and total plot area were more than 90% and similarity indices between plot area above 400$m^2$ and total plot area were more than 85%. It may be as a conclusion that minimum plot area was generally about 500$m^2$ and in case of requiring more accuracy, minimum plot area was about 1,000$m^2$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1997

The purpose of this research was to investigate the effect of P fertilization and cutting fkquency without N fertilizer on nutritive value and nitrogen fixation activity of alfalfa. A field experiment was conducted on the experimental farm of Kongju National University at Yesan from 1994 to 1996. The experimental design was a split plot design with two P levels as main plot and two cutting frequencies as the sub-plot. The results obtained are summarized as follows. Available phosphate, exchangeable Ca and Na in the soil were slightly increased with P fertilizer and basal treatment of lime. Average DM yield was 1.5 ton and 1.4 ton in second and third year. There was no significant difference within P level and cutting kquency. The first cut showed higest CP value as cutting times increased the value tend to be lowered. Crude protein content in 3 and 4 cutting regimes were from 16.3 to 16.6% 17.4 to 17.9% respectively, but no significant effect were found among the main and sub-plot. ADF and NDF in 1995 were ranged from 38.2 to 39.9, 45.1 to 58.1% respectively. ADF was 2% more higher in 1996 compared to previous year and NDF was slightly higher in 1996. There was significant difference of ADF between main plot in 1995. .P, Ca, K and Mg of 200kg P level with 3 times cutting treatment in 1995 and 1996 were 0.32 and 0.23, 0.95 and 0.84, 3.24 and 2.87, and 0.36 and 0.26. Significant difference of K and Mg between cutting frequency was observed in 1995. Nitrogen fixing activity of 400kg P fertilizer plots were higher than 200kg P level and 3 times cutting plot also showed higher acetylene reduction activity than that of 4 cutting per year. Phosphate level and cutting frequency treatment of did not significantly affect nitrogen fixation activity.

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.150-153
• /
• 1995

A Pinus densiflora forest in Chuwangsan was studied to determine the adequate plot area of shrub stratum for investigating forest community structure. Nineteen nested plots were set up in the studied forest, and species-area curve and performance curve were established. According to species-area curve, the minimum plot area where a given percentage increase in plot area produced less than the same percentage increase in number of species was 900$m^2$. The minimum plot area where a given percentage increase in plot area produced less than the half of the percent-age increase in number of species was 1,500$m^2$. According to performance curve of the importance values of the major species, the minimum plot area where the importance value of the major species was distinguished from each other was 1,400$m^2$. According to performance curve of species diversity, the minimum plot area was 750-1,500$m^2$. Similarity indices between plot area above 900$m^2$ and total plot area were more than 90% and similarity indices between plot area above 625$m^2$ and total plot area were more than 85%. It may be given as a conclusion that minimum plot area was about 1,500$m^2$ in case of requiring more accuracy.