• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.428-432
• /
• 2010

연소기 챔버 노즐확장부 외피구조물의 성형특성에 대한 연구를 수행하였다. 노즐확장부 외피구조물의 제작에 사용되는 냉간압연 판재가 갖는 이방성 특성을 확인하기 위하여 세 가지 방향의 시편을 제작하여 인장시험을 수행하였으며, 그 결과를 이용하여 Lankford 값을 얻어 구조해석에 적용하였다. 실물형 연소기에 사용될 노즐확장부 외피구조물의 제작 및 성형공정을 통하여 외피구조물의 성형특성을 확인하였으며, 성형으로 얻은 변형률들을 구조해석 결과들과 비교하였다. 본 연구에서 얻은 결과들은 확대비가 더 큰 노즐확장부 제작을 위한 치구 및 성형공정의 설계에 활용될 예정이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.620-623
• /
• 2002

Spinning has been used widely for the manufacture of hollow parts with rotational symmetry. With developing CNC machine, CNC machine center can be applied to the spinning processes. In this paper, a study on the development of CNC spinning technology without mandrel is carried out. The deforming process of the spinning process was simulated by DEFORM 3D to give basic design data.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.236-239
• /
• 2009

Cowl cross bar, a component of automotive cockpit module, has been manufactured by using welding processes of several tube parts with different diameters. However, in order to reduce costs and increase the quality, it is required to develop a new production method to manufacture the cowl cross bar as one-piece In this study, therefore, eliminating the welding process, tube drawing process which is one of metal forming processes was designed by using combined drawing technique. In addition, the selectable range of area reduction ratio was defined as a design guideline and the designed process sequence was verified by finite element analysis.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.60-68
• /
• 2009

The objective of this paper is to design stamping die of inner reinforcement panel with DL 950 advanced high strength steel as stamping materials through numerical analyses and experiments. The stamping process was designed as bending dominant process consisting of 1 step of notching and 4 steps of bending processes. In order to obtain a proper design of the stamping die, various three-dimensional elasto-plastic finite element analyses were performed using a commercial code AUTOFORM V4.2. Design parameter of stamping die was chosen as the corner radius of the stamping die for each step. From the results of the FE analysis, feasible corner radii of the stamping die, which can minimize the deviation of corner angle of the stamped part from design data, and forming load for each part were estimated. Stamping experiments were carried out using the manufactured stamping die according to the proposed die design. The results of experiments were shown that the stamping die can successfully manufacture the inner reinforcement panel with DL 950 advanced high strength steel as base stamping material.

• 소성∙가공
• /
• 제12권2호
• /
• pp.102-109
• /
• 2003

In the manufacturing process of metal matrix composites parts, thixoforging is one of the most effective forming processes. The major purpose of the current study is to provide the proper conditions such as the die shape, the forging velocity, the forging time, the forging pressure and reinforcement injection velocity and pressure on various defects in thixoforged cylinder liner, filling tests were performed by MAGMA S/W. In order to evaluate the effectiveness of the calculated conditions which is given by computer aided engineering, A357, A380 and SiC$_{p}$/A380 cylind~5$mu extrm{m}$r liner were fabricated under the calculated conditions. SiC$_{p}$/A380 composite billets were fabricated by both the mechanical stirring and electrical magnetic stirring process. Incase fo SiC$_{p}$/A380 composite cylinder liner, reinforcement distribution and effect of reinforcement(SiC$_{p}$) content(10~20 vol. %)and size(5.5~14${\mu}{\textrm}{m}$) on the mechanical properties were investigatedstigated.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.106-113
• /
• 1996

Using stainless steel as the cold forged parts especially the outer parts of automobile is gradually increasing because it can bear up against the erosion and the wear. During cold forging of the stainless steel the working pressure acting on die surface are very high therefore the wear on die surface can be greatly increased. In cold forging processes, die failure must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. The die wear affects the tolerances of forged parts, metal flow and costs of processes etc. The only way to to control these failures is to develop methods which allow prediction of the die wear and which are suited to be used in the desing stage in order to optimize the process. In this paper, the rigid-plastic finite element method was combined with the wear prediction routine and then the forward extrusion process using stainless steel was analysed simultaneously. To minimize the die wear the FPS algorithm was applied and the optimal conditions of die configuration are suggested.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.41-46
• /
• 2016

Welding is an absolutely essential component of industries such as the automotive industry, the construction industry and even the aviation industry. Although it is a widespread technology it is still characterized by lots of uncertainties. This still requires well experienced and highly skilled workforce to design and perform safe welding processes. The early knowledge of distortion and residual stresses is almost an issue which is influenced mainly by the welding parameters and the fixture design. But more and more engineers want to know as well final properties of the assembled components. With the beginning of the computer age in the 1970s and 1980s last century, the numerical prediction of manufacturing processes using FEM was gradually getting better and has established itself in the industry since the 1990s as a standard tool. Unlike in metal casting and forming industry, however, the everyday use of FEM- simulation tools for welding processes eked out a shadowy existence for a long time. This paper will give a short classification of welding simulation types and a structured overview on the technical questions. Selected case studies and the benefits achieved through simulations with the software Simufact welding are discussed. Finally an outlook on future developments will be given.

• Design & Manufacturing
• /
• 제9권3호
• /
• pp.41-44
• /
• 2015

The progressive die is processing methods that can improve the productivity for sequentially transferring while continuously producing in multiple processes. In this study was carried out the die analysis through the load analysis acting on the terminal die and sheet metal forming also the study was carried out with respect to optimized die design for the terminal die and progressive die manufacturing using the CimatronE Die Design.

• 소성∙가공
• /
• 제25권1호
• /
• pp.5-11
• /
• 2016

The control of the roll velocities is essential in maintaining stability during ring rolling, but such control is difficult. The determination of the best roll velocities can be helped with the use of FE simulations and processing maps, which give the useful information such as power dissipation and flow instability for hot metal forming processes. In the current study, the workability of 7050 aluminum alloy is evaluated by using processing map. With the developed information, the stability of the ring rolling condition, called the Constant Growth Velocity Condition (CGVC), is evaluated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.225-230
• /
• 2002

As in most metal forming processes, die and lubrication are of vital importance in hydrostatic extrusion. An efficient die design and lubrication system selection reduce the pressure required for a given reduction ratio by lowering friction at the billet-die interface. In contrast to the conventional macroscopic extrusion, fine-wire fabrication requires higher extrusion pressure and effect of friction is much more significant. Forming fine Au, Ag, and Cu wire with hydrostatic extrusion process in cold condition, the effect of extrusion die angle, lubrication and billet's initial diameter was studied.