• 대한토목학회논문집
• /
• 제34권6호
• /
• pp.1881-1891
• /
• 2014

2010년부터 턴키심의위원 풀 제도를 폐지하고, 상설심의위원 제도를 도입하여 현재까지 턴키입찰공사는 설계적합최적가방식, 종합평가방식으로서는 입찰가격, 설계점수조정, 가중치기준, 확정금액최상설계방식의 5가지 낙찰자 결정방식으로 선정하고 있다. 또한 낙찰자 결정방식으로서 설계심의분과위원회를 크게 중앙 지방 특별 설계자문위원회의 분과위원으로 구성하여 운영하고 있으나, 아직 로비 부담에 대해서 개선되지 못한 것은 심의위원 풀제에서 상설심의위원으로 심의 주체만 변경되었을 뿐, 턴키입찰에서 설계심의가 가지는 비중과 설계심의방식도 과거와 유사하기 때문이다. 그러므로 가격경쟁을 부분적으로 강화하여 설계점수가 낙찰을 좌우하는 풍토를 개선하고, 기술경쟁은 영업력보다 실질적인 기술력이 경쟁력을 가질 수 있도록 설계심의제도를 개선하는 것이 필요하다. 이에 이 연구는 낙찰자 결정방식의 설계심의 운영제도와 문제점 그리고 개선된 설계심의방안을 제시하였다.

• 한국소음진동공학회논문집
• /
• 제26권6_spc호
• /
• pp.687-696
• /
• 2016

A series of process to design an acoustic lens for underwater imaging is reviewed and the method to evaluate characteristics of the lens is investigated. If the target specification of lens is given, the design process consists of the material selection, evaluation of its properties, lens geometry design, prediction of lens characteristics, manufacturing, and evaluation by measurement. In this study, an actual acoustical lens is made by cutting polymethylpentene block. The characteristics of lens are predicted by the hybrid method, combination of ray tracing and Rayleigh integral. For the direct comparison between the prediction and measurement results, a simulation method based on the equivalent source method is suggested to reflect the actual radiation pattern of transducer used for measurements. Finally, the measurement is conducted in a small water tank to observe the actual characteristics of the manufactured lens.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.59-67
• /
• 2017

Purpose: As we are facing the global crisis from the climate change and energy depletion, urgent actions are needed to design a integrated sustainable building. This paper suggests that a sustainable design awards can stimulate for architects to bring the cutting-edge ideas into a realized building in comparison to green building certification system. AIA COTE Top 10 design awards, organized and run by AIA(American Institute of Architects) COTE(Committee on the Environment) from 1997, is analyzed as a case study. By researching the core of the AIA COTE Top 10 design awards system in terms of evaluation measures and submission requirements, meaningful suggestions were drawn to supplement Korea Green Building Awards system and to design and realize leading green buildings in Korea. Method: The comparison between AIA COTE Top 10 and Korea Green Building Design Awards was made in terms of evaluation measures, submission requirements, and green building certification systems. Result: This paper finally suggests the following three points in conclusion: 1) Set the standards of evaluation measures reflecting the three aspects(economy, environment, social) of sustainability, 2) Set the qualitative evaluation measures and corresponding submission requirements that can apply in the design awards in comparison to green building certification system, 3) Develop and balance submission requirements in response to evaluation measures to proceed systematic evaluation of the green buildings.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.237-243
• /
• 2013

Objective: The present study developed an estimation method of boundary zone representative humanoids(hereafter, EBZ method) using descriptive statistics on the design target population. Background: The boundary zone method(hereafter, BZ method) generates representative humanoids at a boundary zone that statistically accommodates a designated percent of the design target population; however, the BZ method has a practical limitation because it requires a large scale anthropometric database on the design target population. Method: The EBZ method developed in the present study consisted of 3 steps. In the first step, the boundary zone of accommodating a designated percent(e.g., 90%) is formed under the assumption of normal distributions for anthropometric sizes. In the second step, cases that fall within the boundary zone are estimated using descriptive statistics(mean, standard deviation, and covariance) on the design target population. In the last step, K-mean cluster analysis is conducted for the cases, and representative humanoids are selected from each of clusters. Results: Evaluation results showed that mean accommodation percent of the EBZ method was 90.9%(range: 90.8~91.1%) which is similar to the target percent(90%). In addition, standard deviation of accommodation percent for 100 repetitions was 0.1%. Lastly, the number of representative humanoids generated by the EBZ method(n = 20) was similar to the BZ method(n = 16). Conclusion: The EBZ method can generate representative humanoids which accommodate a designated percent of the design target population using descriptive statistics. Application: The EBZ method can be utilized in the generation of humanoids for ergonomic design and evaluation of products when the large scale anthropometric database on the design target population is not existed.

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.215-222
• /
• 2012

Design-build is expanding gradually in large construction projects over 10billion won, and continue to work in health care facilities is increasing in this way. This constructional method in health care facilities, despite the many advantages, many problems caused by design changes are being raised. Raises the question of design changes on the side of construction contract, such as approval systems have been studied in the field of construction. The purpose of this study design in aspects of architectural planning on changing the grasp of the issues outlined in the ITB and bid evaluation criteria through consideration of the basic plan for improvement guidelines and evaluation criteria is presented. In conclusion, Design build, according to the presence of existing users are more likely to lead to design changes. Thus, hospital architecture, depending on how it is considered that constructional methods. And evaluation items of ITB(Invitation To Bidder) for a large part of the change in the variables evaluated in the hospital building is not suitable for the design build. Instead, the overall shape of the building and department, unit type and size, vertical and horizontal parts of the circulation system in the shape of the building that does not change in structure and etc should be considered for evaluation.

• 한국실내디자인학회논문집
• /
• 제20권3호
• /
• pp.41-48
• /
• 2011

The purpose of this study was to analyze research trends in post-occupancy evaluation and to explore Improvement Directions. Also this study investigated historical development of domestic POE researches and current discussions to POE in architecture and interior design fields. The results were as follows. For the purpose of this study, 55 articles from 3 journals were selected and analyzed. 55 articles analyzing POE methodology and applying POE method were published from 1990 to 2010. In the 1990s, studies on introduction of POE method, potential and limitation were conducted. In the 2000s, the research theme showed the study for evaluation of apartment measuring the residents satisfaction. Gathering the opinions of designers and people in architecture field, they have recognized the need to perform POE, indeed it has been difficult to find POE researchers and utilized POE data. Nevertheless, some of them have performed POE of their building and got feedback from residents. In conclusion, to apply POE method and develop its potential, it is necessary to minimize the barriers. It should Therefore, be performed POE by stakeholders who are designers, builders and residents and POE data would be provided a variety of types. Furthermore, POE certification system should be designed at the government level and basically, POE courses must be included in the architectural curriculum.

• 한국지진공학회논문집
• /
• 제18권2호
• /
• pp.95-103
• /
• 2014

The current AISC341-10 standard specifiesa value of 0.02 radian for the minimum rotation capacity of connections for the intermediate steel moment frame system. However, despite of the advances realized in the domains of performance evaluation method and analysis method, research onthe minimum rotation capacity of the intermediate steel moment frame systemsatisfying the seismic performance has not been conducted in detail. In this study, the intermediate moment frame systemisdesigned with respect to current standards and the seismic performance in accordance with the rotational capacity of connections is evaluated using the seismic performance evaluation method presented in FEMA-P695. The minimum rotation capacity of intermediate steel moment frames required to satisfy seismic performance as well as the major design values affecting the seismic performance of moment frame areestimated. To that goal, the design parameters are selected and various target frames are designed. The analysis models of the main nonlinear elements are also developed for evaluating seismic performance. The resultsshow that the 20-story structure doesnot meet the seismic performance even if it satisfies the rotation capacity of 0.02 radian.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.247-257
• /
• 2002

Recently, performance-based analysis/design methods such as the capacity spectrum method and the direct displacement-based design method were developed. In these methods, the estimation of energy dissipation capacity due to inelastic behavior of RC structures depends on empirical equations which are not sufficiently accurate. On the other hand, in a recent study, a simplified method for evaluating energy dissipation capacity was developed. In the present study, based on the evaluation method, a new seismic design method for flexure-dominated RC walls is developed. In determination of seismic earthquake load, the proposed design method can address variation of the energy dissipation capacity with design parameters such as dimensions and shapes of cross-sections, axial force, and reinforcement ratio and arrangement. The proposed design method is compared with the current performance-based design methods and the applicability of the proposed method is disscussed.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.9-19
• /
• 2011

Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. In this paper, a design decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. An illustrative example is used to demonstrate the application of the proposed framework.

• 한국지반신소재학회논문집
• /
• 제8권2호
• /
• pp.21-29
• /
• 2009

블록식 보강토옹벽의 설계 시 국부적 안정성 평가에 있어서 실험적 방법을 통한 전면블록과 보강재 사이의 연결강도에 대한 특성을 평가해야 한다. 그러나 NCMA 및 FHWA에서 제안하고 있는 연결강도 평가방법을 적용할 경우에는 다소 보수적인 평가결과 나타나게 된다. 따라서 본 연구에서는 전면블록과 지오그리드 보강재 사이의 연결강도 시험을 수행하였다. 또한 시험결과를 NCMA, FHWA 및 Soong & Koerner가 제안한 평가방법에 의해 블록식 보강토옹벽 설계사례에 적용하였다. 그 결과, Soong & Koerner에 의해 제안된 연결강도 시험으로부터 얻어진 극한연결강도를 허용연결강도로서 적용하여도 설계시 요구되는 안정성을 만족하는 것으로 나타났다.