• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.8
• /
• pp.1086-1093
• /
• 1997

Conceptual system design of a multistage centrifugal air-compressor is the first loop of design procedure. The properly designed system is important for compactness, low manufacturing cost, easy controllability, fast extension for the new specification of the compressor. A simple procedure of conceptual system design is proposed in the present study using simple analysis. A few examples of the procedure for a real system are shown and several design aspects are discussed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.163-168
• /
• 2000

In this paper, a 3-D computer-aided die design process was developed for automobile rear frame with drawing, trimming, flanging, cam-piercing and piercing for tool design. The tool design has been done using Pro/Engineer on a personal computer. It is composed of four stations. The goal of this research is to apply each of stations for the standard tool specification to each station.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.43-51
• /
• 1994

The design technique of turbo pumps has been developed due to an increasing demand from related industrial fields. But infant stage of turbomachinery in the domestic industry needs more fundamental design method. Among various types of pumps, centrifugal pump was chosen because of its wide industrial application. It is difficult to decide the correct specification of centrifugal impeller, because of its complex flow analysis at the inlet, passage and outlet. This study is limited on the impeller blade design and its related performance analysis.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.99-118
• /
• 2018

Recently, the limit state design method in the design of the structure is in global trend, but it is limited to a few structures in Korea. Since the introduction of the limit state design method has recently been attempted for tunnels, which are the main underground structures, it is surely necessary to understand the latest limit state design method. Therefore, based on the recently published AASHTO LRFD Road Tunnel Design and Construction Guide Specification (2017), structural load factors and load combinations were reviewed, and various factors which should be applied for the review of structures have been analyzed. In this study, utility tunnel section and subway tunnel sections used in Korea were analyzed by the limit state design method, and we have analyzed the direction of application of limit state design method through studying the tendency of member force by various influential factors such as ground conditions, load modifier and joint stiffness.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1919-1928
• /
• 1999

There are no standard language for the specification of speed-independent circuits because existing specification methods are designed appropriately to each synthesis methodology. This paper suggests a method of using VHDL, a standard hardware description language, for the specification and synthesis of speed-independent circuits. Because VHDL is a multi-purpose language, we define a subset of VHDL which can be used for the synthesis. We transform the VHDL description into a signal transition graph and then synthesize speed-independent circuits by using a previous synthesis algorithm which uses a signal transition graph as the specification method. We suggest a systematic transformation method which transforms each VHDL statement into a partial signal transition graph and then merges them into a signal transition graph. This work is a step towards to the development of an integrated framework in which we can utilizes the existing CAD tools based on VHDL. Also, this work will enable a easier migration of the current circuit designers into asynchronous circuit design.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.63-66
• /
• 2002

This paper proposes a new identification method to be able to meet the design specifications. By introducing a controller factor in Pade apporximation of the previous system identification algorithm, relationships between system identification and design specifications are obtained through the Ziegler-Nickels tuning rule.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.431-442
• /
• 2010

Because embedded system is combined system of hardware and software, we should design by considering elements such as real-time, reactive, small size, low weight, safe, reliable, harsh environment, low cost, and so on. However, those are poorly reflected on current embedded system development. Especially, there is few existed framework-based embedded system development. As a result, there are many internal codes which is not related with system operation in currently developed embedded system, and reusability or variability is not considered into embedded system development. Therefore we propose a formal specification technique using Z language to guarantee completeness or consistency of design of reusability framework proposed for improving reusability of embedded system. Also we assure correctness of framework design by checking Z model through Z-Eves Tool.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.96-102
• /
• 2008

In a large screen sized LCD-TV, a backlight system with only one cold cathode fluorescent lamp(CCFL) can not meet brightness specification. Thus, considerable numbers of CCFLs are used to meet brightness specification. In this paper, the design guide for the inverter transformer which can drive 4 CCFLs instantaneously is presented. With the presented design, the inverter transformer that guarantee identical lamp currents under the nonidentical lamp characteristic condition, can be implemented easily. The developed inverter transformer is adopted in a 42" LCD-TV backlight. The experimental results are presented to show the validity of the presented design guide.

• Journal of the Korean Home Economics Association
• /
• v.49 no.10
• /
• pp.49-56
• /
• 2011

The purpose of this study is to research the difference between the size suggested by brand uniforms and the size suitable for high school girls. We compared and analyzed the size system of brand uniforms after researching the wearing conditions of uniforms of 4 brands (A, B, C, D) in order to establish a size system of brand uniforms that fits different body types of teenagers. First, we conduct research on the actual condition of brand uniforms worn by high school girls, and investigate unsatisfactory factors and problems. Second, we actually measure the uniform size of each brand and analyze measurement differences between each brand. Our results show each brand uniform has different size specifications and the importance of appropriate size specification is greater as students select uniform based on design and brand awareness rather than body size. Compared with the average body size the skirt and especially the blouse is much smaller with no extra room compared with standard size 85 blouses and size 71 skirts. Therefore, the adjustment of size specification is needed in brand school uniforms. However, a larger scale investigation is needed as this study was conducted with a limited sample size.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.4
• /
• pp.273-285
• /
• 2008

In this paper we propose an engineering bill of materials (E-BOM) copy method that can be utilized to manage the product information for each equipment during building a product lifecycle management (PLM) system in the order-specific semiconductor equipment manufacturer. The previous works studied on an E-BOM creation and management method for the mass manufacturing and production. The method is difficult to apply to an environment in which many engineering changes occur and the different specification to each equipment is required such as semiconductor equipments and facilities adopting built-to-order instead of built for inventory. Moreover the method is known to be the major drawback to deteriorate the design efficiency. Our E-BOM copy method enables users efficiently to manage the specification of a product and shortens the product development cycle. To implement the E-BOM copy method in the PLM environment, we developed the E-BOM copy system that automatically generates new parts and their numbers according to the numbering rule while copying the E-BOM from existing semiconductor equipments and then can apply the parts for reuse to new semiconductor equipments. This system can duplicate not only 3D CAD data but also technical documents.