• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.813-822
• /
• 2002

The purpose of the present study is first to refine the mathematical material models for moisture and temperature distributions in early-age concrete and then to incorporate those models into finite element procedure. The three dimensional finite element program developed in the present study can determine the degree of hydration, temperature and moisture distribution in hardening concrete. It is assumed that temperature and humidity fields are fully uncoupled and only the degree of hydration is coupled with two state variables. Mathematical formulation of degree of hydration Is based on the combination of three rate functions of reaction. The effect of moisture condition as well as temperature on the rate of reaction is considered in the degree of hydration model. In moisture transfer, diffusion coefficient is strongly dependent on the moisture content in pore system. Many existing models describe this phenomenon according to the composition of mixture, especially water to cement ratio, but do not consider the age dependency. Microstructure is changing with the hydration and thus transport coefficients at early ages are significantly higher because the pore structure in the cement matrix is more open. The moisture capacity and sink are derived from age-dependent desorption isotherm. Prediction of a moisture sink due to the hydration process, i.e. self-desiccation, is related to autogenous shrinkage, which may cause early-age cracking in high strength and high performance concrete. The realistic models and finite element program developed in this study provide fairly good results on the temperature and moisture distribution for early-age concrete and correlate very well with actual test data.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.19-31
• /
• 2007

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio and containing fly ash and blast furnace slag. Internal humidity change and shrinkage strain were about 10%, 10%, 7%, 11%, 11% and $320{\times}10^{-6}$, $270{\times}10^{-6}$, $231{\times}10^{-6}$, $371{\times}10^{-6}$, $350{\times}10^{-6}$ respectively on OPC30, O30F10, O30F20, O30G40, O30G50 and from the results, fly ash made humidity change and strain decrease but slag increase comparing with ordinary portland cement. Considering only relation internal humidity and shrinkage by self-desiccation, humidity change and shrinkage represented the strong linear relation regardless of mineral admixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.37-45
• /
• 2012

This study was carried out to examine the optimal treatment conditions of ethanol and glycerine for processing technology development of preserved flowers in carnation (Dianthus caryophyllus) 'Desio' commonly used for flower design. For this purpose, effects of dipping duration of ethanol solution and treatment duration and concentration of glycerine on preserved flower quality were evaluated. Ethanol treatment resulted in perfect dehydration and decoloration of petals and it was proper at 24~48 hours under high brightness and low chroma. Appropriate concentration and time of glycerine treatment was 30% at 36 hours because it resulted in Munsell value of 4.0R in Hue, 6.49 in Value, and 19.8 in Chroma (4.0R 6.49/14) representing the most approximate value to that of fresh petals. Decreasing rate in weight after desiccation tended to reduce by longer time of immersing and higher concentration. Weight after 12 hours of immersing reduced up to 86~90% according to treatment time in non-treatment group of glycerin, meanwhile, it reduced up to 51~69% under higher concentration of 40%. However, weight after 48 hours of immersing reduced up to 90% regardless of desiccation time in non-treatment group of glycerine, to the contrary, decreasing rate reduced by 46~54% through glycerine treatment of 40%. Time for desiccation required 24 hours in glycerin concentration of 10~20% except 6 hours of immersing time, however, higher concentration resulted in increased time up to 48 hours.

• Plant Disease and Agriculture
• /
• v.5 no.1
• /
• pp.64-66
• /
• 1999

Black leg occurred in potato (Solanum tuberosum L.) grown in Pyungchang, Kangwon-Do, Korea. The symptoms began as small water-soaked lesions on stem, and the affected stems discolored black to brown. It became yellow under dry condition. When lower parts of potato were affected in the field, wilting of leaves and desiccation of the stem were developed. The causal organism was isolated from lesions and identified as Erwinia carotovora subsp. atroseptica based on the morphological, physiological and biochemical characteristics. E. carotovora subsp. atroseptica is the first described bacterium which causes black leg in potato in Korea.

• Korean Journal of Environmental Biology
• /
• v.23 no.2 s.58
• /
• pp.135-140
• /
• 2005

In order to construct an artificial cultivation of Nostoc flagelliforme on solid medium, we attempted to assess the viability of approaches, which utilized either BG-11 agar or sand medium using both sterile and non-sterile algal segments. In the trial in which the BG -11 agar medium was inoculated with the non-sterile algal segments, the algae exhibited the rapid growth in the initial 4 days of cultivation. However, after 4 days of cultivation, the growth rate of the algae slowed, and the algal growth was completely stopped by 7 days of cultivation. When the BG -11 medium was inoculated with the sterile algal segments, the algae exhibited the rapid growth for a longer period of 8 days, reaching a length of 24.9 mm. The growth rate during this period was measured to be $24.5\%$. After the 8 days of cultivation, the algal growth rate began to slow and had almost stopped by the 13 days of cultivation. On the other hand, when the sterile algal segments were inoculated onto a sand plate, the algal segments decomposed, reaching total decomposition after 11 days of cultivation. By way of contrast, the desiccation treatment samples continued to grow for 14 days of cultivation. After 14 days of cultivation, the algae achieved a length of 26.1 mm, with a growth rate of $30.6\%$. Our results indicate that periodic desiccation may constitute an effective strategy for the prevention of algal decomposition.

• Journal of Pharmacopuncture
• /
• v.19 no.4
• /
• pp.359-362
• /
• 2016

Objectives: Loss of lumbar lordosis causing pain and curvature of the vertebral skeleton to one side is a relatively uncommon disease. To our knowledge, successful treatment of loss of lumbar lordosis with any potentized homeopathic drug diluted above Avogadro's limit (that is, above a potency of 12C) has not been documented so far. In this communication, we intend to document a relatively rare case of loss of lumbar lordosis with osteophytic lippings, disc desiccation, and protrusion, causing a narrowing of secondary spinal canal and a bilateral neural foramina, leading to vertebral column curvature with acute pain in an adolescent boy. Methods: The patient had undergone treatment with orthodox Western medicines, but did not get any relief from, or cure of, the ailment; finally, surgery was recommended. The patient's family brought the patient to the Khuda-Bukhsh Homeopathic Benevolent Foundation where a charitable clinic is run every Friday with the active participation of four qualified homeopathic doctors. A holistic method of homeopathic treatment was adopted by taking into consideration all symptoms and selecting the proper remedy by consulting the homeopathic repertory, mainly of Kent. Results: The symptoms were effectively treated with different potencies of a single homeopathic drug, Calcarea phos. X-ray and magnetic resonance imaging (MRI) supported recovery and a change in the skeletal curvature that was accompanied by removal of pain and other acute symptoms of the ailment. Conclusion: Homeopathy can be a safe, much less expensive, non-invasive, and viable alternative for the treatment of such cases.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.358-361
• /
• 1998

This study was carried out to develop a short term hardening method of tree seedlings of Rhus chinensis Mill., Evodia daniellii Hemsley and Parthenocissus tricuspidata(Sieb. et Zucc.) Planck for afforestation on a concave and a crack of cut-rock slope. The seedlings were grown in a cylinder shaped pot made of polyvinyl net with the soil media of peatmoss, vermiculite, clay, compost, fertilizer, and absorbant(40:25:19:15:1:0.1, v:v). They were cultivated in a greenhouse for four months and in field condition for two months. During the last three months of the growing period the seedlings were hardened by periodic desiccation and irrigation in 4 to 10 days interval. The hardened seedlings showed lower leaf water potential, higher leaf osmotic pressure, and lower T/R ratio than those before the hardening. The hardened seedlings survived well on the soil medium in the concave of cut-rock slope.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.670-678
• /
• 2016

We compared the germination rate of dehisced ginseng (Panax ginseng) seeds that were dried under two different conditions, slowly at $15^{\circ}C$ [relative humidity (RH) 10-12%] and rapidly under a laminar airflow cabinet at $25^{\circ}C$ (RH 22-25%). The measurements showed that drying rate and seed moisture content (SMC) play important roles in storage ability and vigor. The seeds that were dried rapidly at $25^{\circ}C$ showed high GR compared with the seeds that were dried at $15^{\circ}C$ after 6 and 12 months of storage at $-80^{\circ}C$ irrespective of MC. Seeds dried slowly at $15^{\circ}C$ with MC higher than 7.0% showed high GR maintenance after storage at $-18^{\circ}C$ and at $4^{\circ}C$ in comparison with rapidly dried seeds. However, the GR of the slowly desiccated seeds decreased as mean SMC was reduced to less than 5.0%, whereas the rapidly dried seeds were distinguished by significantly high GR irrespective of the storage conditions. The ginseng seeds desiccated under different conditions showed differences in storage performance. Seeds with 7-9% MC that were dried slowly at $15^{\circ}C$ for 5-7 days showed high GR after $4^{\circ}C$ and $-18^{\circ}C$ storage; however, longer periods of desiccation decreased the germination level remarkably compared with that of rapidly dried seeds.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.249-256
• /
• 2002

High performance concrete is prone to large autogenous shrinkage due to its low water to binder ratio (W/B). The autogenous shrinkage of concrete is caused by self-desiccation as a result of water consumption by the hydration of cement. In this study, the autogenous shrinkage of high performance concrete with and without fly ash was Investigated. The properties of fresh concrete, slump loss, air content, and flowability as well as the mechanical properties, compressive strength and modulus of elasticity, were also measured. Test results was shown that the autogenous shrinkage of concrete increased as the W/B decreased. For the same W/B, the autogenous shrinkage of high strength concrete with fly ash was considerably reduced although the development of its compressive strength was delayed at early ages. Furthermore, the autogenous shrinkage and compressive strength of high strength concrete were more rapidly developed than those of normal strength concrete. It was concluded that fly ash could improve the quality of high strength concrete with respect to the workability and autogenous shrinkage.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.2
• /
• pp.65-78
• /
• 2017

In this study, stable carbon isotopic analysis (22 specimens) and magnetic susceptibility analysis (23 specimens) were conducted out on the specimens collected from two points (trench DT1, DT2) in the floodplain of Jemincheon(hereinafter the Jemin plain) to reconstruct the Holocene Environments (Period I, Period II, Period III) of the Jemin plain in Gongju, Chungnam. The results were as follows: In Period I (approximately 7,480~4,940 yrs B.P.) and especially around 7,480~7,320 yrs B.P., it was cool-dry and there were two minor climate fluctuations. This period received a continuous flow of sediments, rather than massive amounts of sediments due to abrupt flooding, and therefore, there was almost no soilization process. Period II(approximately 4,940~2,600 yrs B.P.) was also relatively cool-dry. However, in Period II b, unlike I, the minor climate fluctuations were less pronounced. In this period, flooding and desiccation repeated, inducing soilization processes especially around 3,160 yrs B.P. In Stage III (~360 yrs B.P.), it was warm and humid compared to II b. However, in III a, there was no inflow of sediments due to irregular flooding, and in fact, soilization process was more manifested than during II b due to the impact of the desiccation environment. However, there were some mass movements from Bonghwang Mt. (a.s.l. 147m) caused by heavy rains and typhoon during III b (approximately 360 yrs B.P.), thus moving a large amount of debris (i.e. gravel), which resulted in sedimentation.