단무지 제조 과정 중 탈염 공정이 단무지에 물리화학적 및 관능적 특성에 미치는 영향을 알아보기 위해 4가지의 소금농도(5, 10, 15, 20%)에서 3개월간 염장한 후 무의 소금 농도, Ca 함량, 텍스쳐 및 관능적 성질을 $25^{\circ}C$에서 탈염기간에 따라 조사하였다. 무 중 소금농도도 탈염시간이 증가함에 따라, 염장농도가 낮을수록 급격히 감소하여 소금농도의 감소와 탈염시간의 대수값 간에는 직선적인 관계가 성립되었으며, Ca 함량도 비슷한 경향을 보였다. 무 조직의 견고성은 탈염시간이 증가할수록 견고성도 증가하여 일반적인 김치류 실험과는 상이한 결과를 보였다. 또한 관능적 특성 비교 결과 짠 맛, 짠 냄새 그리고 신 맛, 신 냄새가 탈염기간 중 감소하였고, 군덕내 및 맛은 거의 변화가 없었으나 염장농도가 높을수록 그 강도가 매우 낮았다. 텍스쳐 중 사각사각한 성질은 5, 20% 염장농도에서 탈염 2일째까지 증가한 후 감소하였고 10% 염장농도에서는 계속 감소한 반면, 15% 염장농도에서는 계속 증가하였다. 따라서 종합적인 기호도 측면에서 보면 탈염 3일째의 염장농도 20% 단무지를 가장 선호하는 것으로 나타났다.
외부 환경에 노출된 철제문화재는 환경오염요인에 직접적으로 영향을 받아 부식에 취약하다. 특히 철제유물에 있어서 활성부식을 일으키는 염화이온($Cl^-$)은 반드시 제거되어야 하지만 옥외 철제문화재는 유물의 특성상 탈염의 대상에서 제외되고 있다. 그러므로 본 연구에서는 조선시대 철비를 대상으로 보존처리 및 탈염실험을 실시하였으며, 탈염은 흡습지를 이용한 탈염방법과 기존의 침적탈염방법을 함께 실시하여 그 효율성을 비교하였다. 탈염의 평가는 실체 금속 현미경, SEM-EDS, pH측정과 이온크로마토그래피(IC), XRD분석을 통하여 알아보았다. 실체 금속현미경으로 조사된 결과 부식은 층을 이루고 있으며 금속조직은 백주철로 확인된다. 또한 탈염 전 부식물에 대한 SEM-EDS분석결과 Fe와 O가 주로 검출되었으며 특히 Cl이 2.48wt%까지 측정되었다. 탈염용액에 대한 pH와 음이온을 분석한 결과에서는 흡습지를 이용한 탈염방법도 침적탈염방법과 유사한 탈염효과를 볼 수 있었다. 마지막으로 탈염 전 후 부식물에 대한 XRD분석 결과 탈염전에는 goethite, magnetite, lepidocrocite와 akaganeite가 검출되었으나 탈염 후에는 akaganeite가 검출되지 않아 흡습지를 이용한 탈염의 효과를 확인할 수 있었다. 그러므로 본 연구를 통하여 흡습지를 이용한 탈염방법에서도 기존의 침적탈염방법과 유사한 탈염효과를 확인할 수 있었다.
주조철제유물은 발굴 후 보존환경이 맞지 않은 경우 부식이 급속하게 진행되며 특히 블록형 파손이 발생하고 최종에는 분말화 된다. 따라서 부식 요인, 즉 $Cl^-$ 이온을 제거하는 탈염처리가 중요하다. 그러나 주조철제유물은 탈염과정 중 형태가 파손되는 경우가 빈번히 발생하여 탈염 과정을 생략하거나 탈수 등의 안정화처리로 그치는 경우가 많다. 기존의 탈염 방법은 주로 물을 이용한 알칼리 수용액 방법이다. 그러나 물의 수산화이온은 부식을 촉진시키고 높은 표면 장력으로 내부 균열을 확대시켜 주조철제유물의 탈염 과정 중 파손 원인으로 판단된다. 따라서 본 연구에서는 표면 장력이 낮은 에틸알코올을 이용하여 탈염을 실시하고 그 탈염 효과를 알아보았다. 실험 결과 에틸알코올 탈염방법은 상온의 알칼리 수용액 방법과 유사하거나 더 높은 $Cl^-$ 이온 용출 효과를 보여주었다. 또한 에틸알코올 방법은 수용액 방법보다 유물의 파손이 적고 Fe의 용출이 거의 없어 탈염의 안전성 측면에서 우수함을 확인하였다. 본 실험은 현장적용 가능한 유기 용매 탈염 방법을 검토한 것으로 추가 연구를 통하여 주조철제유물의 안전하고 효율적인 안정화 방안을 마련하고자 한다.
Desalting methods for chloride ions from the excavated iron objects were studied. These methods were compared with room temperature and heating condition of treating solution. During the Desalting treatments the $Cl^-$concentration of the solution were measured regularly and the plotted for $Cl^-$concentrations the square root of time, heating methods showed that the $Cl^-$ ions are more extracted. For the desalting treatments these plots were found to be flattening line, it was showed the changing second solution. Also, the changing solution in the room temperation detected less $Cl^-$ ions of heating treatment solution. As the examination for the relative humidity has compared for desalting objects during 8 days, it was showed a re-corroded appearance of R.H90%. As it did not detected a $Cl^-$ ions of re-corroded section, these phenomena were showed the naturally occuring corrosion of the objects in the high relative humidity.
배추의 염절임(5$0^{\circ}C$, 25% 소금용액)및 탈염(5$0^{\circ}C$, 증류수)과정중 침지시간에 따른 물질이동을 수분흡수 또는 유출, 소금유출 또는 흡수 및 환원당유출로써 조사하였다. 염절임 과정중 수분유출과 소금흡수는 초기 6시간 침지과정에서 빠르게 이루어진 후 증가현상이 둔화되었다. 24시간 염절임 과정 후 초기 100g 배추무게당 수분유출과 소금흡수는 각각 33.35g과 6.26g이었다. 염절임과정중 수분함량은 94.29%에서 83.11%로 줄어들었다. 환원당농도 역시 29.2mg/$m\ell$에서 6.5mg/$m\ell$로 낮아졌으며, 침지시간(hr) 의 평방근을 이용한 직선식은 Y=30.1841-5.0269√t이었다. 24시간 염절임 한후 탈염과정에서의 수분흡수와 소금유출은 초기 4시간 침지과정에서 빠르게 이루어진 후 직선적으로 계속적인 증가현상을 나타내었다. 12시간 탈염과정 후 초기 100g배추 무게당 수분흡수는 20.82g이 었으며, 소금유출은 9.14g이었다. 탈염과정에서의 소금유출이 염절임과정의 소금흡수보다 높은 이유는 염절임 및 탈염과정에서 배추의 고형분 유출에 기인된 것이었다. 12시간의 탈염공정으로 김치 제조시 배추의 적정 소금농도인 3%로 낮출수 있었다. 이때의 환원당농도는 1.6mg/$m\ell$로 낮아졌으며, 침지시간의 평방근을 이용한 직선식은 Y=6.7854-1.5992√t로써 염절임 공정의 기울기값 (-5.0269)과 비교할때 탈염공정에서의 환원당 겉보기 유출속도는 낮았다.
The performance of an electrodialyzer for concentrating seawater is predicted by means of a computer simulation, which includes the following five steps; Step 1 mass transport; Step 2 current density distribution; Step 3 cell voltage; Step 4 NaCl concentration in a concentrated solution and energy consumption; Step 5 limiting current density. The program is developed on the basis of the following assumption; (1) Solution leakage and electric current leakage in an electrodialyzer are negligible. (2) Direct current electric resistance of a membrane includes the electric resistance of a boundary layer formed on the desalting surface of the membrane due to concentration polarization. (3) Frequency distribution of solution velocity ratio in desalting cells is equated by the normal distribution. (4) Current density i at x distant from the inlets of desalting cells is approximated by the quadratic equation. (5) Voltage difference between the electrodes at the entrance of desalting cells is equal to the value at the exits. (6) Limiting current density of an electrodialyzer is defined as average current density applied to an electrodialyzer when current density reaches the limit of an ion exchange membrane at the outlet of a desalting cell in which linear velocity and electrolyte concentration are the least. (7) Concentrated solutions are extracted from concentrating cells to the outside of the process. The validity of the computer simulation model is demonstrated by comparing the computed results with the performance of electrodialyzers operating in salt-manufacturing plants. The model makes it possible to discuss optimum specifications and operating conditions of a practical-scale electrodialyzer.
Benzotriazole (B.T.A) which has been mainly used for the stabilization processing method of excavated copper and bronze artifacts is vaporized within 2~3 years after the usage because it is unstable at the acid conditions and cannot protect the surface of artifacts. In this study, NaOH method which has been used for the steel artifacts was applied as a stabilization process for the method of copper and bronze artifacts to gush chlorine ion out. For the reproduction of excavated samples, copper and bronze plates were dipped in 0.1M HCl for 26 hrs to form CuCl, rusted at $70^{\circ}C$ with RH 75% for the formation of corrosion products, and desalted in 0.1 M NaOH solution. The concentration of chlorine ion was measured by using ionchromatography. During the desalting process, a large quantity of chlorine ions was gushed out in early period and corrosion products were not additionally generated through the re-corrosion experiment. This NaOH desalting process was found to be a method of stabilization process for copper and bronze artifacts from the formation of Tenorite (CuO) during desalting as a protection layer for corrosion.
Papermaking reconstituted tobacco is an important strategy for recycling the waste tobacco residues. To indentify the influences of the inorganic components on harmful components delivery in cigarette smoke, a self-made electrodialysis stack was assembled to desalt the tobacco extract. The influences of the applied current and extract content on the removal rate of the inorganic ions were investigated. Results indicated that the applied current was a dominant impact on the desalination performance. High currents lower than the limiting current density could accelerate the desalting efficiency but cause higher energy consumption. A current of 2 A, or current density of ${\sim}11mA{\cdot}cm^{-2}$, was an optimal choice by considering both the energy consumption and desalting efficiency. A 20% tobacco extract was an appropriate content for the electrodialysis process. More than 90% of inorganic ions could be removed under the optimum condition. The preliminary result indicated that removal of inorganic components was beneficial to decrease the harmful component delivery in cigarette smoke. Naturally, ED is an environmentally friendly and high-effective technology for desalting the tobacco extract.
Proteomics for biomarker validation needs high throughput instrumentation to analyze huge set of clinical samples for quantitative and reproducible analysis at a minimum time without manual experimental errors. Sample preparation, a vital step in proteomics plays a major role in identification and quantification of proteins from biological samples. Tryptic digestion a major check point in sample preparation for mass spectrometry based proteomics needs to be more accurate with rapid processing time. The present study focuses on establishing a high throughput automated online system for proteolytic digestion and desalting of proteins from biological samples quantitatively and qualitatively in a reproducible manner. The present study compares online protein digestion and desalting of BSA with conventional off-line (in-solution) method and validated for real time sample for reproducibility. Proteins were identified using SEQUEST data base search engine and the data were quantified using IDEALQ software. The present study shows that the online system capable of handling high throughput samples in 96 well formats carries out protein digestion and peptide desalting efficiently in a reproducible and quantitative manner. Label free quantification showed clear increase of peptide quantities with increase in concentration with much linearity compared to off line method. Hence we would like to suggest that inclusion of this online system in proteomic pipeline will be effective in quantification of proteins in comparative proteomics were the quantification is really very crucial.
철제유물에서 용출된 수용성 염소이온의 농도를 측정하는 가장 이상적인 방법은 탈염처리 용액을 이온크로마토그래피(Ion Chromatography)로 분석하는 것이지만 대부분의 문화재 관련기관에서는 예산이나 전문인력 부족 등의 이유로 사용하지 못하고 염소이온농도 측정기(Cl meter)를 주로 사용하고 있다. 본 연구는 철제유물의 탈염처리 용액에 대한 염소이온농도 측정기의 $Cl^-$ 이온 농도 측정결과와 이온크로마토그래피의 측정결과를 교차 검증하여 상호 기기간의 신뢰성과 안정성을 평가하고자 한다. 분석결과 초순수는 염소이온농도 측정기의 전극에 잔류하는 수용성 염소이온의 영향으로 미량의 염소이온이 검출되었고, Sodium sesquicarbonate 시약 성분에 미량으로 존재하는 수용성 염소이온이 검출되었다. 탈염처리한 수용액은 탈염 1차에서 가장 많은 염소이온이 측정되었으며, 탈염 2차부터 탈염 4차까지는 소폭 감소하다가 초순수을 이용하는 탈알칼리 단계에서부터 다시 감소하는 경향을 보였다. 염소이온농도 측정기마다 측정횟수에 따른 편차를 보였으며, 탈염용액 내에 염소이온 농도가 높을수록 편차는 심해졌다. 하지만 염소이온 농도가 낮을 경우 편차가 적어 철제유물의 염소이온농도를 측정하기 위한 측정기기로 안정된 결과를 보였다. 전기전도도 측정법은 알칼리 용액의 전기전도도가 높게 나타남에 따라 $Cl^-$ 이온의 함량을 예측하기에는 부적합한 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.