• Journal of Microbiology and Biotechnology
• /
• v.28 no.10
• /
• pp.1723-1729
• /
• 2018

The aim of this work is to investigate the protective efficacy of emodin, an active, naturally-occurring anthraquinone derivative of several traditional Chinese herbs, against Brucella abortus infection in macrophages. Brucella were incubated with different concentrations of emodin and showed that bacterial survival rates were markedly reduced in a dose-dependent manner at increasing incubation time points. Through bacterial infection assay, the highest non-cytotoxic concentration of emodin demonstrated attenuated invasion of Brucella into macrophages, however it did not inhibit the growth of these pathogens within the host cells. On the other hand, emodin effectively decreased the number of bacteria that adhered to host cells, which indicated its potential as an anti-adhesin agent. Furthermore, using immunoblotting and FACS assay for detecting MAPK signaling proteins and F-actin polymerization, respectively, the results showed that the emodin-incubated cells displayed modest reduction in the phosphorylation levels of ERK1/2 and inhibition of F-actin polymerization as compared to control cells. These findings indicate the potential use of emodin as a naturally-occurring alternative method for the prevention of animal brucellosis although this requires confirmation of safe clinical doses.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.18-24
• /
• 2013

This work attempted to fabricate organic/inorganic nanocomposite by combining organic cellulose nanofibrils (CNFs), isolated by 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO)-mediated oxidation of native cellulose with inorganic nanoclay. The morphology and dimension of CNFs, and tensile properties and thermal stability of CNF/clay nanocomposites were characterized by transmission electron microscope (TEM), tensile test, and thermogravimetry (TG), respectively. TEM observation showed that CNFs were fibrillated structure with a diameter of about $4.86{\pm}1.341nm$. Tensile strength and modulus of the hybrid nanocomposite decreased as the clay content of the nanocomposite increased, indicating a poor dispersion of CNFs or inefficient stress transfer between the CNFs and clay. The elongation at break increased at 1% clay level and then continuously decreased as the clay content increased, suggesting increased brittleness. Analysis of TG and derivative thermogravimetry (DTG) curves of the nanocomposites identified two thermal degradation peak temperatures ($T_{p1}$ and $T_{p2}$), which suggested thermal decomposition of the nanocomposites to be a two steps-process. We think that $T_{p1}$ values from $219.6^{\circ}C$ to $235^{\circ}C$ resulted from the sodium carboxylate groups in the CNFs, and that $T_{p2}$ values from $267^{\circ}C$ to $273.5^{\circ}C$ were mainly responsible for the thermal decomposition of crystalline cellulose in the nanocomposite. An increase in the clay level of the CNF/clay nanocomposite predominately affected $T_{p2}$ values, which continuously increased as the clay content increased. These results indicate that the addition of clay improved thermal stability of the CNF/clay nanocomposite but at the expense of nanocomposite's tensile properties.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.294-302
• /
• 2010

Toxicity of 3-MCPD that comes from food manufacture and processing is well-known. Recent studies reported that 3-MCPD fatty acid ester which is formed by metabolic material was 10~2000 times as much as 3-MCPD in food. This study made analysis method of 3-MCPD fatty acid esters by recent research and laboratory work, and determined the content of 3-MCPD and 3-MCPD fatty acid esters in sources and meat processing products. 3-MCPD fatty acid esters were analysed by GC/MS, which were hydrolyzed from fatty acid and then transferred 3-MCPD was extracted and reacted with derivative subject. As a result of analysis method validation, LOD was 5.4ppb, LOQ was 9.0ppb.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.391-399
• /
• 2008

In this paper, we further generalize the work of Lin and Abel to the case of the first and the second order derivatives of energy release rates for two-dimensional, multiply cracked systems. The direct integral expressions are presented for the energy release rates and their first and second order derivatives. The salient feature of this numerical method is that the energy release rates and their first and second order derivatives can be computed in a single analysis. It is demonstrated through a set of examples that the proposed method gives expectedly decreasing, but acceptably accurate results for the energy release rates and their first and second order derivatives. The computed errors were approximately 0.5% for the energy release rates, $3\sim5%$ for their first order derivatives and $10\sim20%$ for their second order derivatives for the mesh densities used in the examples. Potential applications of the present method include a universal size effect model and a probabilistic fracture analysis of cracked structures.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.457-462
• /
• 2015

Hemicellulosic hydrolysates contain not only sugars but also several kinds of ethanol fermentation inhibitory substances such as carboxylic acids, furans and phenolic compounds. In this work, emulsion liquid membrane (ELM) was chosen as a separation technology to remove the inhibitors. A basic simulated hemicellulosic hydrolysate was composed of xylose as sugar, dilute sulfuric acid solution as solvent, and acetic acid as carboxylic acid, and furfural as furan derivative or p-hydroxybenzoic acid(HBA) as phenolic compound was added to the hydrolysate when necessary. Acetic acid and HBA as weak acid could be selectively removed from the hydrolysates in all the ELM systems considered here, but furfural as aldehyde was quite hard to remove. Also, when HBA was added to the basic simulated hemicellulosic hydrolysate, both of acetic acid and HBA in the feed phase could be selectively removed up to 99% in an ELM system with tributyl phosphate as extractant.

• Smart Structures and Systems
• /
• v.21 no.3
• /
• pp.279-286
• /
• 2018

The free longitudinal vibration of a circular truncated nanocone is investigated based on the nonlocal elasticity theory. Exact analytical formulations for tapered nanostructures are derived and the nonlinear differential governing equation of motion is developed. The nonlocal small scale effect unavailable in classical continuum theory is addressed to reveal the long-range interaction of atoms implicated in nonlocal constitutive relation. Unlike most previous studies applying the truncation method to the infinite higher-order differential equation, this paper aims to consider all higher-order terms to show the overall nonlocality. The explicit solution of nonlocal stress for longitudinal deformation is determined and it is an infinite series incorporating the classical stress derived in classical mechanics of materials and the infinite higher-order derivative of longitudinal displacement. Subsequently, the first three modes natural frequencies are calculated numerically and the significant effects of nonlocal small scale and vertex angle on natural frequencies are examined. The coupling phenomenon of natural frequency is observed and it is induced by the combined effects of nonlocal small scale and vertex angle. The critical value of nonlocal small scale is defined, and after that a new proposal for determining the range of nonlocal small scale is put forward since the principle of choosing the nonlocal small scale is still unclear at present. Additionally, two different types of nonlocal effects, namely the nonlocal stiffness weakening and strengthening, reversed phenomena existing in nanostructures are observed and verified. Hence the opposite nonlocal effects are resolved again clearly. The nano-engineers dealing with a circular truncated nanocone-based sensors and oscillators may benefit from the present work.

• Advances in nano research
• /
• v.10 no.4
• /
• pp.359-371
• /
• 2021

A tumor immune interaction is a main topic of interest in the last couple of decades because majority of human population suffered by tumor, formed by the abnormal growth of cells and is continuously interacted with the immune system. Because of its wide range of applications, many researchers have modeled this tumor immune interaction in the form of ordinary, delay and fractional order differential equations as the majority of biological models have a long range temporal memory. So in the present work, tumor immune interaction in fractional form provides an excellent tool for the description of memory and hereditary properties of inter and intra cells. So the interaction between effector-cells, tumor cells and interleukin-2 (IL-2) are modeled by using the definition of Caputo fractional order derivative that provides the system with long-time memory and gives extra degree of freedom. Moreover, in order to achieve more efficient computational results of fractional-order system, a discretization process is performed to obtain its discrete counterpart. Furthermore, existence and local stability of fixed points are investigated for discrete model. Moreover, it is proved that two types of bifurcations such as Neimark-Sacker and flip bifurcations are studied. Finally, numerical examples are presented to support our analytical results.

• Geomechanics and Engineering
• /
• v.28 no.1
• /
• pp.49-64
• /
• 2022

In this work, the bending and dynamic behaviors of advanced composite plates resting on variable visco-Pasternak foundations are studied using a simple shear deformation integral plate model. The research is carried out with a view to a three-parameter foundation including the influences of the variable Winkler coefficient, the constant Pasternak coefficient and the damping coefficient of the elastic medium. The present theory uses a displacement field with integral terms instead of derivative terms by including also the shear deformation effect without introducing the shear correction factors. The equations of motion for advanced composite plates are obtained using the Hamilton principle. Analytical solutions for the bending and dynamic analysis are deduced for simply supported plates resting on variable visco-Pasternak foundations. Some numerical results are presented to demonstrate the impact of material index, elastic foundation type, and damping coefficient of the foundation, on the bending and dynamic responses of advanced composite plates.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.1-8
• /
• 2023

In recent years, robots have been utilized in various industries to reduce workload and enhance work efficiency. The following mobility offers users convenience by autonomously tracking specific locations and targets without the need for additional equipment such as forklifts or carts. In this paper, deep learning techniques were employed to recognize individuals and assign each of them a unique identifier to enable the recognition of a specific person even among multiple individuals. To achieve this, the distance and angle between the robot and the targeted individual are transmitted to respective controllers. Furthermore, this study explored the control methodology for mobility that tracks a specific person, utilizing Simultaneous Localization and Mapping (SLAM) and Proportional-Integral-Derivative (PID) control techniques. In the PID control method, a genetic algorithm is employed to extract the optimal gain value, subsequently evaluating PID performance through simulation. The SLAM method involves generating a map by synchronizing data from a 2D LiDAR and a depth camera using Real-Time Appearance-Based Mapping (RTAB-MAP). Experiments are conducted to compare and analyze the performance of the two control methods, visualizing the paths of both the human and the following mobility.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.599-604
• /
• 2021

In an era where AI artificial intelligence converges into each field, design of AI-CARE function and UI UX design are in the spotlight. The application of shape design and the trend of color are important for visual effects to match new features. In this paper, we would like to use this to present an example of the arrangement and application of form trends and to present design directions. In the introduction, the latest design environmental factors were analyzed and studied in the direction of the new proposal. In the text, the design direction and consideration of the design in the planning were studied by separating the functional design form, and the direction of the design work was presented. At the stage of form and color, a plan was proposed to match the flow of minimalism, universal design, and affordance design. A study method based on case practice is a consideration of how to consider content on shapes and colors specialized in the partial design work, and proposed to enable graphic production of new areas of UI UX in content images to be feasible. Through this study, the design direction and planning of the derivative method of shape and color was reached by suggesting design directionality and validity for each AI CARE bed PART.