• Journal of the Korean Home Economics Association
• /
• v.46 no.6
• /
• pp.13-19
• /
• 2008

In this paper, the dyeing ability of the volcanic ash dyeing on cotton knitted fabrics were investigated. Acrylic copolymer was used to improve the depth of fabric color in the dyeing process. K/S values of dyed fabrics were measured to examine the dyeing properties. Two different classes of dyeing process were tested; (1) volcanic ash dyeing after pretreatment and (2) simultaneous co-treatment with volcanic ash and acrylic copolymer. In the first process, the effects of parameters such as the concentration of volcanic ash, concentration of Na2S04, dyeing time, dyeing temperature and pH of dyebath were noted. In the second process, the effects of parameters such as concentration of acrylic copolymer, dyeing time and temperature, and drying temperature were noted. Experimental results showed that the co-treatment of acrylic copolymer improved the dyeing properties of cotton knitted fabrics with volcanic ash. For the first dyeing experiment, concentration of dispersing agent was 0.1%, concentration of volcanic ash was 4%, treatment time was 20minutes, concentration of $Na_2SO_4$ was 2%, treatment temperature was $60^{\circ}C$ and treatment pH of dyebath was neutral. In the second dyeing experiment, concentration of acrylic copolymer was 2%, treatment temperature was $80^{\circ}C$, treatment time was 40 minutes, and treatment drying temperature was $150^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.20-27
• /
• 2006

Lyocell is a not only environmentally-friendly but also very advantageous fiber. When Lyocell is soaked in water, its wet tenacity does not decrease and elongation and moisture regain of it are better than cotton. However, one drawback of lyocell is its fibrillation. The fibrills of lyocell were generated during wet process such as scouring and dyeing deteriorates the dyeing color depth and the appearance of fabric. The purpose of this study was to decrease the fibrillation tendency of lyocell fabric using crosslinking agent, epichlorohydrine(ECH). The effects of NaOH scouring and ECH crosslinking were observed. The different types of ECH addition methods to lyocell and the various concentrations of ECH in crosslinking reaction onto dyeing characteristic and fibriallation were investigated. Weight loss and whiteness index of crosslinked lyocell by ECH were examined. K/S values of ECH treated lyocell fabrics dyed with reactive dye were measured and SEM images of untreated and treated lyocells were observed extensively to define the fibrillation tendency. The results were as follows ; 1) ECH treatment showed the effect of weight loss and scouring because ECH crosslinking reaction was conducted in alkaline condition. 2) The increase in ECH concentration from 5 to 30% does not affected K/S value changes. 3) ECH crosslinking can effectively prevent the fibrillation tendency of lyocell.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.395-402
• /
• 2018

Increased emphasis on competency-based learning modules and widespread departure from traditional models of Halstedian apprenticeship have made surgical simulation an increasingly appealing component of medical education. Surgical simulators are available in numerous modalities, including virtual, synthetic, animal, and non-living models. The ideal surgical simulator would facilitate the acquisition and refinement of surgical skills prior to clinical application, by mimicking the size, color, texture, recoil, and environment of the operating room. Simulation training has proven helpful for advancing specific surgical skills and techniques, aiding in early and late resident learning curves. In this review, the current applications and potential benefits of incorporating simulation-based surgical training into residency curriculum are explored in depth, specifically in the context of plastic surgery. Despite the prevalence of simulation-based training models, there is a paucity of research on integration into resident programs. Current curriculums emphasize the ability to identify anatomical landmarks and procedural steps through virtual simulation. Although transfer of these skills to the operating room is promising, careful attention must be paid to mastery versus memorization. In the authors' opinions, curriculums should involve step-wise employment of diverse models in different stages of training to assess milestones. To date, the simulation of tactile experience that is reminiscent of real-time clinical scenarios remains challenging, and a sophisticated model has yet to be established.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.57-66
• /
• 2014

The purpose of this study is to design appropriate digital tools for the production of makeup designs. In this study, we used a three-dimensional facial avatar simulation program developed by the Electronics and Telecommunications Research. This study is based on the creation of three-dimensional CG digital art of facial avatar makeup, produced by using simulation technology. First, the actual application and the tools for digital-optimization and media features were created, leading to the research and cleanup. Second, the theoretical background was applied to the formative elements of oriental colors in the designing process. Makeup design elements include point, line, surface, color, and texture. In this study, effective makeup design was interpreted to be based on the representation of particular elements, notably the design principles of balance, proportion, rhythm, repetition, emphasis, contrast, harmony, and unity. In Asia, design is based on the visibility of red, blue, black, yellow, and white-the colors of the five elements-and the use of points, lines, and shapes. This study was recently under scrutiny in relations to digital simulation and various three-dimensional designs, in terms of how to take advantage of a wide range of applications, and how to apply the findings through media and the dissemination of basic research. This study applies the characteristics of the limited existing stereoscopic three-dimensional and digital simulation programs in order to take advantage of the empirical research, providing a basis to implement this research in a meaningful way. A follow-up study is needed to extend these findings and theoretical foundation through continuous observation and in-depth technical development and research.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.119-123
• /
• 1985

The author carried out an experiment to find out the response of rockfish, Sebastes schlegeli(Hilgendorf) to the color lights. The experimental tank($360L{\times}50W{\times}55H\;cm$) was set up in a dark room. Six longitudinal sections with 60 cm intervals are marked in the tank to observe the location of the fish. Water depth in the tank was kept 50 cm level. Light bulbs of 20 W at the both ends of the tank projected the light horizontally into the tank. Two different colored filters were selected from four colors of red, blue, yellow, and white, and they were placed in front of the light bulbs to make different colors of light. Light intensity were controlled by use of auxiliary filters intercepted between the bulb and the filter. The fishes were acclimatized in the dark for 50 minutes before they were employed in the experiment. Upon turning on the light, the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was given as the gathering rate of the fish. The colors favourited by the fish was found in the order of blue, white, yellow and red in day time, and yellow, blue, white and red at night time. The gathering rate of fish on illumination period was not constant and fluctuated with irregularity. The difference of the gathering rate on two different colors of light was great and the difference was larger in day time than in night time.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.6-10
• /
• 1984

The author carried out an experiment to find out the response of rock trout, Hexagrammos otakii (Jordan et starks) to the color lights. The experimental tank (360L$\times$50W$\times$55H cm) was set up in a dark room. Six longitudinal sections with 60cm intervals are marked in the tank to observe the loction of the fish. Water depth in the tank was kept 50cm level. Light bulbs of 20W at the both ends of the tank projected the light horizontally into the tank. Two different colored filters were selected from four colors of red, blue, yellow, and white, and they were placed in front of the light bulbs to make different colors of light. Light intensity were controlled by use of auxiliary filters intercepted between the bulb and the filter. The fishes were acclimatized in the dark for 50 minutes before they were 3employed in the experiment. Upon turning on the light, the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was given as the gathering rate of the fish. The colors favourited by the fish was found in the order of white, yellow, red and blue in day time, and red, yellow, blue and white at night time. The gathering rate of fish on illumination period was small and comparatively fluctuated with stability. The difference of the gathering rates on two different colors of light was great.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.289-302
• /
• 2007

Separation process of heavy minerals was performed with sand from Dunjang beach of Jaeundo, Shinangun, Chonnam, and the feasibility study separating heavy minerals was carried out, and their properties were studied. Samples were selected in three parts, which were upper part, middle part and lower part, with depth. Samples of heavy mineral groups separated with the spiral separator were chosen as starting materials, and they were separated with 3 times of table separation. Heavy minerals presenting in this area were ilmenite, zircon, rutile, anatase, monazite, and xenotime. In the results of 3 times of table separation, minor content of quartz, orthoclase, albite and muscovite were existed as gangue minerals. Accordingly, we concluded that additional specific gravity separation was needed. In the results of separation of heavy minerals by hand picking, it was confirmed that heavy minerals had various genesis because of their various roundness and color.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1303-1308
• /
• 2007

Recently, precast concrete tracks are replacing ballast track for efficient and economic maintenance of track. Precast concrete railroad tracks are manufactured in factory, and transported to railroad construction site for installation. Therefore, quality of precast concrete track itself should be sufficiently good. On the contrary to the convenient manufacturing of precast concrete track, the installation of a precast concrete track requires careful steps. Typically, a precast concrete track is placed on an approximately 15-cm thick lean concrete layer. A mortar is filled between lean concrete layer and precast concrete track to adjust the sloping angle of a precast concrete track for a safe train operation at a curvy section. Then, the use of filled mortarproduces a void underneath a precast concrete track, which is harmful to structural safety of a precast concrete track undercyclic loading. Therefore, it is essential to make sure that there is no void left beneath a precast concrete track after mortar filling. In the continuous resonance method, the amplitude of frequency response measured using an instrumented hammer and an accelerometer is plotted against a pseudo-depth, which is half of the wave velocity divided by frequency. The frequency response functions are measured at consecutive measurement locations, 6-cm interval between measurement points, and then combined together to generate a 2-D plot of frequency response. The sections with strong reflections or large amplitude of frequency response are suspicious areas with internal voids and unfilled areas. The 2-D frequency response plot was efficient in locating problematic sections just by examining the color shade of a visualized plot in 2-D format. Some of the problematic sections were drilled to make a visual inspection of mortar filling. The visual image of interface between mortar and precast concrete track was verified using the validity of the continuous resonance technique adopted in this research.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.135-145
• /
• 2022

In this study, the dyeability of 0.06-denier-per-filament (dpf) ultrafine sea-island-type nylon knitted fabric was investigated and compared with that of 1.0-dpf general nylon with respect to four types of dyes. In particular, leveling, milling, half-milling, and metal-complex dyes were compared at concentrations of 0.5%, 1.0%, 2.0%, 4.0%, and 8.0% on-weight-fabric (o.w.f). In each case, staining was performed at 100 ℃. The dyeabilities of the materials were compared in terms of the depth of color as defined by the ratio of the absorption coefficient (K) to the scattering coefficient (S). Results indicated generally low K/S values for both the 0.06-dpf ultrafine sea-island-type nylon and 1.0-dpf general nylon. In terms of the dye type, the milling and half-milling dyes exhibited K/S values of ≥20 for all colors of yellow, red, and blue for the 0.06-dpf ultrafine yarn sea-island-type nylon, which were superior to those of the other dye types. Hence, the milling and half-milling dyes are considered more suitable than the other dyes. Further, a comparison of dye fastness and compatibility revealed that the half-milling dye was the most suitable dye for the 0.06-dpf ultrafine sea-island-type nylon.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.247-256
• /
• 2021

With the continuous progress and development of the social economy, the importance of commodity packaging is increasingly manifested. It has become an important form of communication between businesses and consumers, and an important means of competition between businesses. The research scope of the thesis: First, through literature investigation, analyze the function of packaging design and consumers' buying attitude, and analyze the name, color, logo, illustration, etc. for general chocolate packaging and travel souvenir chocolate packaging. Research method: Through questionnaire survey, according to consumers' purchasing attitude and personal value of package design, we have in-depth understanding of consumers' purchasing power and package design's influence on purchasing conditions and research. According to the results of this study, first, from the perspective of general chocolate packaging and travel souvenir chocolate packaging to consumer consumption phenomena, general chocolate is more popular. Second, when consumers buy products, the taste of chocolate is more important than product packaging design. Third, in each product group, consumers value their own value when buying chocolate products. Fourth, due to the two important attributes of packaging design and taste, ordinary chocolate has a higher purchase intention than travel souvenir chocolate.