• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.218-224
• /
• 2010

The prevalence of developmental defects of enamel and lesios by post-orthodontic decalcification has been reported with increasing frequency. Even though there have been increasing interests and clinical challenges in esthetic improvement of these lesions, few of studies were reported for using non-invasive approach which is a very significant matter for child and young adults. This study was conducted to assess clinical effect on the improvement in color of these lesions via resin infiltration method developed as minimum invasive technique for white spot. For the 38 maxillary anterior teeth with calcification problem, the changes in color between before- and after- infiltration treatment, were evaluated and summarized as following. 1. A week after infiltration, 25% of developmental defects and 61% of decalcification lesions were improved in color as the value of ${\Delta}E $ below 3.7. 2. 40% of the developmental defects and 6% of decalcification lesions showed no significant change. 3. The developmental defects showed more remarkable changes in color 1 week after infiltration rather than immediately after the treatment. From our study results, it is considered that the amount of color improvement depended on the depth of lesion. In other words, for the lesion having more depth than the depth infiltrant resin can penetrate into, infiltration treatment showed no significant effect. Therefore, for clinical indication of resin infiltration treatment, further research on precise measurement technique of lesion depth is strongly required.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.431-438
• /
• 2006

The determination of the depth of deteriorated concrete is one of the main problems in the structural assessment of concrete structures that have been subjected to a fire. This information is particularly important in order to optimize the future operations of repair/strengthening, or in decision-making concerning a possible demolition. The purpose of this study is to propose evaluation technique of damaged depth of concrete exposed at high temperature. In order to evaluate damaged depth of core picked at member under fire, the 24 specimens have been made with variables of concrete strength(20 MPa, 40 MPa, 60 MPa) and heating exposure condition in 600 and 800 for 2 hours. Color change analysis and water absorption after heating have been measured and split tensile stress test was performed to ka the residual compressive strength against the depth of specimen. The results show that the deeper of the depth from heating face, water absorption ratio is smaller and residual stress ratio is larger and the color of heated face is changed to red color. Using this technique at damage evaluation of fired structure, We evaluate damaged depth of member under fire and determine the reasonable strengthening range.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.967-971
• /
• 2003

As the concerns over health increased in 1990's, research and development on the health material were also activated. The development of UV-cut textile became the hot issue, because the damage of W irradiation due to ozone depletion has become widely known. UV-cut effect is determined by the material, the color, the organization and the density of UV-cut fibers. UV-cut effect is very different according to the fibers. Polyester is known to have a better effect. Even in the same textile material, staple fiber has more effect than filament fiber. Different colors have different offsets. Although textiles have the same color, the effects can be different according to the depth of color. PET, PET/cotton blend, nylon and cotton fabrics were ultraviolet cutting finished with padding method using several absorbers. These UV-cut effect can be improved through the processing. Safety of UV-cut textile for the body must be considered future, Until now the figure of the UV-cut effects has been emphasized. There has been no experiment on the human body, although the textiles are directly on the human body. Futhermore there os no safety standard of UV-cut textiles. Therefore every effort will be made to set the standard UV-cut processing is established. The need of UV-cut products will be known to the consumers.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.1-6
• /
• 2009

Due to the different camera properties of the multi-view camera system, the color properties of captured images can be inconsistent. This inconsistency makes post-processing such as depth estimation, view synthesis and compression difficult. In this paper, the method to correct the different color properties of multi-view images is proposed. We utilize a gray gradient bar on a display device to extract the color sensitivity property of the camera and calculate a look-up table based on the sensitivity property. The colors in the target image are converted by mapping technique referring to the look-up table. Proposed algorithm shows the good subjective results and reduces the mean absolute error among the color values of multi-view images by 72% on average in experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.378-390
• /
• 2015

Image projectors can turn any surface into a display. Integrating a surface projection with a user interface transforms it into an interactive display with many possible applications. Hand gesture interfaces are often used with projector-camera systems. Hand detection through color image processing is affected by the surrounding environment. The lack of illumination and color details greatly influences the detection process and drops the recognition success rate. In addition, there can be interference from the projection system itself due to image projection. In order to overcome these problems, a gesture interface based on depth images is proposed for projected surfaces. In this paper, a depth camera is used for hand recognition and for effectively extracting the area of the hand from the scene. A hand detection and finger tracking method based on depth images is proposed. Based on the proposed method, a touch interface for the projected surface is implemented and evaluated.

• Journal of Korea Multimedia Society
• /
• v.19 no.4
• /
• pp.774-779
• /
• 2016

The conventional methods using color signal for tracking the movement of the object require a lot of calculation and the performance is not accurate. In this paper, we propose a method to effectively track the moving objects using the depth information from a depth camera. First, it separates the background and the objects based on the depth difference in the depth of the screen. When an object is moved, the depth value of the object becomes blurred because of the phenomenon of Motion Blur. In order to solve the Motion Blur, we observe the changes in the characteristics of the object (the area of the object, the border length, the roundness, the actual size) by its velocity. The proposed algorithm was implemented in the simulation that was applied directly to the tracking of a golf ball. We can see that the estimated value of the proposed method is accurate enough to be very close to the actual measurement.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3217-3238
• /
• 2018

In this paper, a depth image up-sampling method is put forward by using pixel classifying and jointed bilateral filtering. By analyzing the edge maps originated from the high-resolution color image and low-resolution depth map respectively, pixels in up-sampled depth maps can be classified into four categories: edge points, edge-neighbor points, texture points and smooth points. First, joint bilateral up-sampling (JBU) method is used to generate an initial up-sampling depth image. Then, for each pixel category, different refinement methods are employed to modify the initial up-sampling depth image. Experimental results show that the proposed algorithm can reduce the blurring artifact with lower bad pixel rate (BPR).

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.645-650
• /
• 2010

In this paper, we present the effect of binocular cues which plays crucial role for the visualization of a stereoscopic or 3D image. This study is useful in extracting depth and disparity information by image processing technique. A linear relation between the object distance and the image distance is presented to discuss the cause of cybersickness. In the experimental results, three dimensional view of the depth map between the 2D images is shown. A median filter is used to reduce the noises available in the disparity map image. After the median filter, two filter algorithms such as 'Gabor' filter and 'Canny' filter are tested for disparity visualization between two images. The 'Gabor' filter is to estimate the disparity by texture extraction and discrimination methods of the two images, and the 'Canny' filter is used to visualize the disparity by edge detection of the two color images obtained from stereoscopic cameras. The 'Canny' filter is better choice for estimating the disparity rather than the 'Gabor' filter because the 'Canny' filter is much more efficient than 'Gabor' filter in terms of detecting the edges. 'Canny' filter changes the color images directly into color edges without converting them into the grayscale. As a result, more clear edges of the stereo images as compared to the edge detection by 'Gabor' filter can be obtained. Since the main goal of the research is to estimate the horizontal disparity of all possible regions or edges of the images, thus the 'Canny' filter is proposed for decipherable visualization of the disparity.

• Korean Journal of Cognitive Science
• /
• v.22 no.3
• /
• pp.235-254
• /
• 2011

Two experiments were conducted to investigate the impact of binocular disparity information on Neon color spreading (NCS). The stimuli was the modification of Ehrenstein figure used by Redies and Spillmann(1981); inner and outer segments were achromatic and middle segments was chromatic. In experiment 1, the effect of binocular disparity was tested in each segment that were divided inner, middle and outer segments. In experiment 2, the impact of added segments that were put in different depth place were tested. The results showed that the segments on same place were, the clearer the NCS was. Consistent with the previous studies, the effect of color segment in front or in behind was not appeared. The case of added segments, regardless of added segments were placed either front or behind, the NCS was reduced. But the effect of added outer segments was more affect then added inner segments. This results were suggested that NCS could be affected by depth information but more affected by stage of before depth processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2727-2732
• /
• 2014

Recently, the researches of object tracking and recognition using Microsoft's Kinect are being actively studied. In this environment human hand detection and tracking is the most basic technique for human computer interaction. This paper proposes a method of improving the accuracy of the detected hand region's boundary in the cluttered background. To do this, we combine the hand detection results using the skin color with the extracted depth image from Kinect. From the experimental results, we show that the proposed method increase the accuracy of the hand region detection than the method of detecting a hand region with a depth image only. If the proposed method is applied to the sign language or gesture recognition system it is expected to contribute much to accuracy improvement.