• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.57-64
• /
• 2004

There are two major types of underwater blasting at Korea, bridges and harbor construction work. Pier blasting for lay the foundation bridges construction is used dry excavation working (drilling and charging) after pump out water and then fire pump in water that is same as bench blasting. In contrast, underwater blasting for harbor construction and increase of harbor load depth is used to barge with digging equipment that is in oder to drilling on the surface and blasting work(charge, hook-up) under water. Thus, there are need to special concern such as charge method and hook-up method different from tunnel blasting work and bench blasting work. If do not use special concern breaks out dead pressure and mis fire because of there are so many difficult condition such as water pressure, obstruct field of vision. In this study underwater blasting at Busan Harbor Construction have consider with special concern that is plastic pipe charge method used to MegaMITE I and specialized buoy hook- up method make far initial system detonate on the surface used to TLD. The results is designed blast pattern charge per delay effect an inspection of verify between predict velocity and measure velocity. minimized break out mis fire consideration charge method, hook up method. According to result best underwater blasting design is 105mm drilling dia, MeGAMITE II, HiNLL Plus(non electric detonator).

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.293-304
• /
• 2013

Because the present groundwater law broadly regulates a simple and impractical guideline ignoring aquifer characters and geology, general purpose facilities for protection of groundwater contamination is still considered unsatisfactory to ensure groundwater resources. In recent, there have been growing attempts in the packer development as crucial techniques and devices for groundwater protection. This study investigated the application of packer grouting techniques to contaminated groundwaters of two well sites in the Andong and Yeongi areas, both of which revealed a satisfactory effect with improved water quality: 94% decrease in turbidity at the Andong area and 60% decrease in $NO_3$-N, respectively. Based on aquifer characters including geology, weathering depth, fracture pattern, hydraulic gradient, and the flow path of contaminants, the integrated properties of groundwater contamination should be evaluated and treated with the help of accurate analyses such as bore hole imaging and monitoring data. Packer grouting and casing on well to ensure the useful aquifer free of contaminant are expected to play important role in inhibiting the inflow of contaminants when adequately applied. Therefore it is concluded that these can serve as reliable tools in remediation and protection of contaminated groundwater as well as efficient utilization of groundwater.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.297-306
• /
• 2000

To improve the performance of MEMS devices, fabricating single-crystalline silicon HARS (high aspect ratio structure) with thicknesses of up to several tens of micrometers has been an active research topic in recent years. However, achieving electrical isolation, which is required for actuating a structure or sensing an electrical signal, has been one of the main problems in single-crystalline silicon HARS fabrication technologies. In this paper, new isolation technologies using high aspect ratio oxide beams and sidewalls are developed to achieve electrical isolation between electrodes of single-crystalline silicon HARS. The developed isolation technologies use insulating oxide structural supports from either the structural sides or from the bottom. In this case because the trench oxide supports have a depth of several tens of ${\mu}m$, the effects of residual stress must be considered. In this paper, insulating supports are fabricated using PECVD TEOS films, the residual stress of the insulating supports is measured, and the effect of the residual stress on the structure is analyzed. It is shown using microresonators, that the developed isolation technologies can be effectively used for HARS using single-crystalline silicon.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.1
• /
• pp.15-23
• /
• 1985

Growth response and evapotranspiration of tobacco as to each soil moisture condition treated with different height of ground water table such as 30cm, 100cm, 170cm, and 230cm were investigated. The results obtained were as follows; 1. Soil water potential in the rhizosphere (25cm depth from surface) treated with ground water table (G.W.T) of 230 cm was less than -6.5 bar at 60 days after transplanting. 2. Dry weight of leaves per plant was the highest in the pot treated with 100 cm G.W.T and was the lowest in the pot treated with 230 cm G.W.T.. Leaves/Stem ratio of dry weight was the lowest in the pot treated with 230 cm G.W.T. This would show that extension of leaves as compared with elongation of stem was suppressed. .3. In the roster stress condition of 230 cm G.W.T., extension of leaves was continued until the latter growth stage, Relative growth rate of leaf area per plant of the pot with 30 cm G.W.T. was the highest through all growth period after fixation of G.W.7., but owing to lower density of leaf, the dry weight of leaves per plant was less rather than that of the pot with 170 cm G.W.T. at 64 days after transplanting. 4. The highest evapotranspiration per plant per day was shown at the 45th day after transplanting in the pots with 30cm and 100cm G.W.T. and at 60 days in the pots with 170cm and 230cm G.W.T respectively. 5. In the soil moisture conditions with 30cm and 100cm G.W.T., evapotranspiration per plant per hour was much higher in the daytime that at night as well as in clear day than in rain-cloudy day owing to loner relative humidity , but in the water stress condition with 230 cm G.W.T., that was much lower. 6. Total evapotranspiration per plant during the whole growing period of 64 days was in order of 30cm > 100 cm > 170 cm > 230 cm G.W.T.. Total evapotranspiration for 34 days after fixation of G.W.T was much higher at night than in the daytime in case of water stress conditions i.e 170cm and 230cm G.W.T. but in normal condition of the pots with 30cm and 100cm G.W.T. that was much higher in the daytime than at night. 7. Leaf water potential of the 3rd and 6th leaf from top at 64 days after transplanting was in order of 100cm > 30 cm > 170cm > 230cm G.W.T. The reason why leaf water potential in the pot with 30cm was less than that in the pot with 100cm G.W.T. would be the abnormal turgidity with low density of cell substrates by the excess water absorption in the pot with 30cm G.W.T..

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.1
• /
• pp.53-59
• /
• 1986

The effects of soil moisture on seasonal changes of photosynthesis, transpiration and stomatal resistance were studied in sorghum (Pioneer 931) and sorghum - sudangrass hybird (Pioneer 988) at Suweon in 1985. Soil moisture was maintained with approximately 100, 80, 60 and 40% of field moisture capacity in large concrete pot (12m length $\times$ 1m width $\times$ 1m depth). 1. Photosynthesis and transpiration showed a sharp seasonal changes and reacted similarly to water stress and environmental factors, and were the highest in the middle of August, and were the lowest in the beginning of October. Sorghum - sudan hybird had better photosynthesis, transpiration and stomatal control than those of sorghum in hot summer season. 2. The rate of photosynthesis of 60 and 80% field moisture capacity was higher than that of 100 and 40% throughout growing season, but the effect of soil moisture on photosynthesis varied seasonally by climate factors. Optimum soil moisture was 60% in early summer and fall, and was 60 - 80% in hot summer season. 3. Drought and over-moisture affected physiological metabolism of plant, and so the dry matter yield of 40 and 100% field moisture capacity decreased by 70% compared with that of 60% field moisture capacity.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.1
• /
• pp.25-30
• /
• 1987

There are differences in opinion as to whether nitrogen fertilizer should be used when establishing alfalfa (Medicago sativa L.). Various reports show that under a hot environment, rhizobia (Rhizobium meliloti) are not as effective in fixing atmospheric nitrogen as they are under moderate temperatures. It is also believed that the addition of nitrogen fertilizer inhibits nodulation of alfalfa seedlings. A replicated experiment was conducted under controlled environmental conditions at the University of Nevada-Reno, Reno, Nevada, USA, to determine the effects of nitrogen application on seedling growth and nodulation of alfalfa grown in a hot environment. Sterile sand was used as the growing media to which a complete nutrient solution minus nitrogen was applied volumetrically to each pot daily. In addition, half of the pots received NH4-$NO_3$, at the rate of 11.2 kg per ha at seeding and at two and four weeks after planting giving a total nitrogen application rate of 33.6 kg per ha during the seven-week experimental period. Rhizobia inoculant (R-12) consisted of a mixture of strains 171-15a, 1682c and 80 PI 265 of (Rhizobium meliloti). Inoculant was applied to the seeds prior to planting and to the sand media at two and four weeks after seeding. Twenty seeds were planted in pots 14.0 cm in diameter and 11.5 cm deep. Plants were thinned to ten plants per pot after emergence and were grown in a controlled environment chamber with a 16-hour light period. Soil temperature at 6 cm depth ranged from 17.4^{\circ}C.$ to 31.1^{\circ}C.$ and had a daily mean of 26.5^{\circ}C.$. Plants were harvested at weekly intervals for seven weeks. Root, shoot and total length, dry weight, volume and number of nodules per plant were determined. Root, shoot, and total length were greater in seedlings grown in soil where nigrogen was applied than that grown in soil to which no nitrogen was applied. The average size of the seedlings as determined by volume and weight was more than two times greater where plants were fertilized with nitrogen. Nodule number per seedling was also greater when nitrogen was applied compared to those which received no nitrogen. The differences were greater as the plants became older. The rhizobia did not fix enough nitrogen for adequate growth of seedlings. This is probably due to high temperature growing conditions that caused the rhizobia to become relatively ineffective as compared to cooler growing conditions. Data suggests it would be desirable to apply nitrogen at seeding when alfalfa is established under hot conditions that occur in mid- or late summer.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.257-269
• /
• 2001

Numerical simulation is performed to understand the structural behavior of an underground radwaste repository, assumed to be located at the depth of 500 m, in a granitic rock mats, in which a fault intersects the roof of the repository cavern. Two dimensional universal distinct element code, UDEC is used in the analysis. The numerical model includes a granitic rock mass, a canister with PWR spent fuels surrounded by the compacted bentonite inside the deposition hole, and the mixed bentonite backfilled in the rest of the space within the repository cavern. The structural behavior of three different cases, each case with a fault of an angle of $33^{\circ},\;45^{\circ},\;and\;58^{\circ}$ passing through the cavern roof-wall intersection, has been compared. And then fro the case with the $45^{\circ}$ fault, the hydro-mechanical, thermo-mechanical, and thermo-hydro-mechanical interaction behavior have been studied. The effect of the time-dependent decaying heat, from the radioactive materials in PWR spent fuels, on the repository and its surroundings has been studied. The groundwater table is assumed to be located 10m below the ground surface, and a steady state flow algorithm is used.

• Journal of the Korean Society of Groundwater Environment
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1996

The Nanji landfill is one of the biggest uncontrolled landfill in terms of its size and scale in the world. Because the landfill was constructed on the very vulnerable alluvial deposit installing no pollution control systems such as bottom liner and leachate collection systems, it has caused a serious adverse effect to near-by groundwater and surface water systems. A through remedial investigation comprising plume detection and site-characterization was performed to design the remedial measure. As a part the investigation, comprehensive water quality study was conducted, using ten existing observation wells and one bundle type monitoring well, to determine the contaminant indicators for the plume delineation and to define the vertical and horizontal variation of specific contaminants via distances from the landfill. The results clearly shows that EC and temperature are a good pollution indicators and the vertical concentrations of specific contaminants measured in the fully screened wells are 20 to 90% more than those measured at the same depth in bundle type well which is located just 2 m apart. This paper presents a cost effective monitoring and sampling method to define the contaminant plume and obtain a basic data for leachate control measures.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.14-20
• /
• 1986

Responses of three different crops to soil water status were investigated in a Bonryang Sandy loam for 5 years. The changes in soil water potential, water and nutrient uptakes, growth pattern, water use efficiency and yield were analyzed under different irrigation conditions. Chinses cabbage showed more water stress than radish and red pepper in the non-irrigatedcultivation. The higher soil water potential, the more nutrient and water uptake, and evapotranspiration were observed. Water use efficiency was increased with the increase of evapotranspiration up to the optimum amount, whereas the efficiency was decreased when evapotranspiration was exceeded the optimum lebel. Little growth of chinese cabbage was observed when the soil water potential was lower than -1.7 bar at 20-30 cm depth in spring cultivation. The optimum soil water potential for irrigation was -0.2 bar, -0.5 bar and -0.2 - -0.5 bar for chinese cabbage, radish and red pepper, respectively. Optimum irrigation markedly improved the crop quality and yield in comparison to non irrigation condition.

• Journal of Technology Innovation
• /
• v.21 no.2
• /
• pp.25-56
• /
• 2013

As science and technology are emphasized as national competitiveness, major nations designate new growth engine industry and establish the effective investment and the development strategy to enhance industrial development and competitiveness through science and technology. New industrial sectors such as Biotechnology and renewable energy have been spot lighted as major new growth engines and this competitive situation is getting fiercer. Universities and research institutions in each country selected and announced the future promising technological field which will produce ripple effect in the future on a regular basis. In Korea, various research institutions continue to select and announce the promising technological fields. In this study, we would like to study the method to derive the promising technological field in the field of biotechnology spotlighted as a new growth engine by utilizing patent information. We would like to derive the major technological field by collecting domestic and international patents in the field of biotechnology using IPC code based technological classification and identifying bio technological trends utilizing text mining method for analysis of technological development trends with patents. Patent contour of US and Korea is compared and analyzed through analysis of text mining to derive the general technological development field in the field of biotechnology. After that, we would like to investigate research theme of promising biotechnology focused technological development through details on technological trends through in-depth analysis about technological field which draws interest more and more in Korea and other countries.