• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.3
• /
• pp.151-156
• /
• 1986

There are differences in recommendations in the USA as to whether nitrogen fertilizer should be applied when establishing alfalfa (Medicago sativa L). The reason for not applying nitrogen is because some researchers found the addition of nitrogen reduced nodulation of alfalfa plants. A replicated experiment was conducted under controlled environmental conditions at the University of Nevada-Reno, Reno, Nevada, USA, to determine the effects of nitrogen application on seedling growth and nodulation of alfalfa when grown in a cool environment. A sterile sand was used in the growing media to which a complete nutrient solution minus nitrogen was applied volumetrically to each pot daily. Half of the pots received $NH_4NO_3$, at the rate of 11.2 kg/ha, at seeding and two and four weeks after planting, giving a total nitrogen application rate of 33.6 kg/ha. Rhizobia inoculant (R-12) consisted of a mixture of strains 171-15a. 1682c and 80 PI 265 of Rhizobium meliloti. Inoculant was applied to the seeds prior to planting and to the sand media at two and four weeks after seeding. Twenty seeds were planted in pots 14.0 cm in diameter and 11.5 cm deep. Seedlings were thinned after emergence to ten plants per pot. They were grown in a controlled environment chamber with a 16-hour light period. Soil temperatures at 6 cm depth ranged from $5.7^{\circ}C\;to\;21.5^{\circ}C$ and had a daily mean of $16.2^{\circ}C$ Plants were harvested at weekly intervals for seven weeks at which time root, shoot and total length, dry weight, volume and number of nodules per plant were determined. Root, shoot and total length were not affected by nitrogen fertilizer. However, application of nitrogen increased the size of the seedlings as determined by dry weight and volume when compared to plants which were not fertilized. This indicates that rhizobia did not fix enough atmospheric nitrogen to promote good growth. Nitrogen application resulted in significantly more nodules per plant. The effect of nitrogen fertilizer became more apparent as the plant became older. Results of this experiment show there are benefits from applying nitrogen at a low rate when establishing alfalfa under a cool environment.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.165-170
• /
• 2009

The increase in P availability to rice under flooded soil conditions involves the reductive dissolution of iron phosphate and iron (hydr)oxide phosphate. However, since $NO_3^-$ is a more favourable electron acceptor in anaerobic soils than Fe, high$NO_3^-$ loads function as a redox buffer limiting the reduction of Fe. The effect of adding $NO_3^-$ on Fe reduction and P release in paddy soil was investigated. Pot experiment was conducted where $NO_3^-$ was added to flooded soil and changes of redox potential and $Fe_2^+$, $NO_3^-$ and $PO_4^{3-}$ concentrations in soil solution at 10 cm depth were monitored as a function of time. Redox potential decreased with time to -96 mV, but it was temporarily poised at about 330${\sim}$360 mV when $NO_3^-$ was present. Nitrate addition to soil led to reduced release of $Fe_2^+$ and prevented the solubilization of P. Phosphate in pore water began to rise soon after incubation and reached final concentrations about 0.82 mg P/L in the soil without $NO_3^-$ addition. But, in the soil with $NO_3^-$ addition, $PO_4^{3-}$ in pore water was maintained in the range of 0.2${\sim}$0.3 mg P/L. The duration of inhibition in $Fe_2^+$ release was closely related to the presence of $NO_3^-$, and the timing of $PO_4^{3-}$ release was inversely related to the $NO_3^-$ concentration in soil solution. The results suggest that preferential use of $NO_3^-$ as an electron acceptor in anaerobic soil condition can strongly limit Fe reduction and P solubilization.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.2
• /
• pp.159-166
• /
• 2011

This experiment was carried out to investigate the effect of application of swine slurry (SS) and slurry composting-biofilteration liquid fertilizer (SCB) on productivity of sorghum${\times}$sorghum hybrid (SSH) and soil environment in reclaimed land of Sukmoon in Korea. Dry matter (DM) yields of SSH in the treatments of SS and chemical fertilizer (CF) were higher than those of in SCB treatment in reclaimed land, but DM yields in SS and CF did not show a significant difference as compared to SCB. Nutritive values of SSH were not different among CF, SS and SCB. In soil samples collected at the end of the experiment, the concentration of organic matter was significantly increased by SS and SCB as compare to that at the beginning of the experiment (P<0.05), whereas the concentration of total nitrogen was not affected by SS and SCB. To investigate the moisture content of soil, the soils were collected from three layers; surface (0~5 cm), intermediate (10~15 cm), and deep (20~25 cm) layer. The moisture contents of soils increased according to the soil depth and the soil moisture was immediately affected by the amount of rainfall. Therefore, we suggest that the cultivation of SSH using SS in reclaimed land is possible and that additional nitrogen fertilizer was surely applied in case of application of SCB to cultivate SSH.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.10
• /
• pp.15-24
• /
• 2017

A self-supported temporary excavation method called Inclined Earth Retaining structure (IER) has been developed by improving an existing excavation method. The stability of the IER was proved with both model tests and field tests. Especially, the results of the model tests proved that the lateral displacement of a model retaining wall was significantly reduced in clay. In this study, the applicability of the IER installed in the soft clay ground is estimated by analyzing survey data collected in the construction field. The results of FE analysis show that the lateral displacement of the IER decreased by 70.9% of that of a single row, self-supported retaining wall using the same number of H-piles. Thus, using the IER method in the soft clay ground will increase the stability of the excavated ground with the effect restraining its lateral displacement. Furthermore, using Deep Cement Mixing (DCM) to the upper half embedded depth of front support is recommended as a subsidiary method of reducing the lateral displacement of IER in the soft clay ground based on FE analysis results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1275-1284
• /
• 2018

Objective: A 28-d trial was conducted to evaluate the effect of diets with different energy and lipase levels on performance, nutrient digestibility, serum profiles, gut health, and carcass quality in broilers. Methods: A total of 720 one-day-old male Ross 308 broilers ($45.4{\pm}0.5g$) were randomly assigned to one of the following four treatments: i) RET, reduced energy treatment (metabolizable energy = 2,950 and 3,100 kcal/kg for starter and finisher diet), ii) BDT, basal diet treatment (metabolizable energy = 3,050 and 3,200 kcal/kg for starter and finisher diet, iii) RET015, RET+0.15 g/kg lipase, and iv) RET03, RET+0.3 g/kg lipase. There were 10 replications (cages) per treatment with 18 birds per cage. Results: During d 1 to 14, broilers fed BDT, RET015, and RET03 diets had higher (p<0.05) body weight gain than those fed RET diet. During d 1 to 14, 15 to 28 and the overall experiment, feed conversion ratio in RET03 treatment was lower (p<0.05) compared with RET treatment. On d 14, the apparent total tract digestibility (ATTD) of dry matter (DM), ether extract (EE), and gross energy in RET03 treatment was higher (p<0.05) than those in RET treatment, while the ATTD of N was increased (p<0.05) by RET03 treatment. On d 28, broilers fed RET03 diet had higher (p<0.05) ATTD of DM than those fed RET and RET015 diets, while the ATTD of EE in BDT and RET03 treatments was increased (p<0.05) compared with RET and RET015 treatments. Broilers fed RET03 diet had higher villus height (VH) and VH:crypt depth (CD) ratio than those fed RET and BDT diets. The activity of pancreatic lipase in BDT and RET03 treatments was higher (p<0.05) than that in RET treatment. Conclusion: Taken together, lipase supplementation (3,000 U/kg feed) increased growth performance, nutrient digestibility, VH, VH:CD ratio and lipase activity, but decreased triglyceride, low-density lipoprotein cholesterol and the abdominal fat percentage in broilers fed reduced energy diet.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.123-127
• /
• 2014

We developed a digital 3-axis flux-gate magnetometer for magnetic field signal measurement from warship during demagnetizing and degaussing processes. For the magnetometer design, we considered following points; the distance between magnetic field measurement station and magnetometer located under sea is about several 100 m, the magnetometer is exposed to magnetic field of ${\pm}1mT$ during demagnetizing process, and magnetometer is located under the sea about 30 m depth. To overcome long distance problem, magnetometer could be operated on wide input supply voltage range of 16~36 V using DC/DC converter, and for the data communication between the magnetometer and measurement station a RS422 serial interface was employed. To improve perming effect due to the ${\pm}1mT$ during demagnetizing process, magnetometer could be compensated external magnetic field up to ${\pm}1mT$ but magnetic field measuring rang is only ${\pm}100{\mu}T$. The perming effect was about ${\pm}2nT$ under ${\pm}1mT$ external magnetic field. The magnetometer was tested water vessel with air pressure up to 6 bar for the sea water pressure problems. Linearity of the magnetometer was better than 0.01 % in the measuring range of ${\pm}0.1mT$ and noise level was $30pT/\sqrt{Hz}$ at 1 Hz.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1025-1032
• /
• 2005

This paper presents experimental and analytical studies on long-term behavior of square CFT columns with diaphragm. In order to investigate the effect of the diaphragm on the long~term behavior, experiments for six specimens with two diaphragms and three different column length, and three-dimensional finite element analysis for each specimen have been performed. The finite element models considering the interface behavior between the steel tube and the inner concrete were verified from comparison of the test results with the analysis results. From the test and the analysis results, the following conclusions were obtained. The confinement effect created by the diaphragm does not depends on column length and influences only a part of the whole column that is from the end to the depth which is the same to the width of the column. The shortening of the column with diaphragm which covers more than a half of the cross sectional area of the inner concrete is the same as that of the column under a load applied on the steel tube and the entire section of the inner concrete.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.430-439
• /
• 2002

The development of reinforcing steel is required in reinforced concrete structures. The standard hooks that have been widely used for the tensile development in the beam-column joints tend to create difficulties of construction such as steel congestion as the member cross sections are becoming smaller due to the use of higher strength concrete and higher grade steel. Using the reinforcing bars with end mechanical anchoring device (headed reinforcement) provides potential economies in construction such as reduction in development lengths, simplified details, and improved responses to cyclic loadings. In this paper, the pullout strengths and behaviors of the headed reinforcement were experimentally studied. In 33 pullout tests performed using D25 deformed reinforcing bars, the test parameters were embedment depth, edge distance, head size, and the use of transverse reinforcement. The pullout strengths determined from tests closely agreed with the pullout strengths predicted using the CCD method. The pullout strengths increased with increasing embedment depths nd edge distances. The strengths tend to increase with the use of larger heads. From the experimental program where the effect of the transverse reinforcement was examined, a modification factor to the CCD was suggested to represent the effect of such reinforcement that is installed across the concrete failure plane on the pullout strengths.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.563-572
• /
• 2004

Since bacterial plaque is known as the major cause of every oral disease, it is necessary to control plaque to maintain periodontal health. Although tooth brushing has been the typical method of plaque control, additional use of plaque control devices are necessary for cleansing interdental areas. Dental floss has been used for a long time as the additional plaque control device and proved to be effective. The newly developed embossed new dental pick is composed of elastic plastic material in form with its tip longer than other toothpick. In addition, as thickness of the tip gradually increases, it can be adapted easily with minimal trauma to interdental gingiva. The embossed tip can remove dental plaque easily, and the opposite end can approach lingual and palatal areas through triple angulation. Therefore, the authors studied the effect of embossed new dental pick and dental floss on periodontally involved 15 patient. The following results were obtained. 1. For embossed new dental pick, probing depth at baseline, 1 week, 4 weeks were $3.6{\pm}0.6mm$, $3.4{\pm}0.5mm$, $3.2{\pm}0.5mm$, respectively, and $4.2{\pm}0.9mm$, $4.1{\pm}0.9mm$, $4.0{\pm}0.9mm$, respectivly for clinical attachment level. 2. In case of embossed new dental pick, bleeding on probing at baseline, 1 week, 4 weeks were $43.0{\pm}4.4%$, $28.5{\pm}5.1%$, $22.2{\pm}5.6%$, respectively, and, at 1 week and 4 weeks, they were significantly different from that of dental floss. 3. Gingival index of toαhpick at baseline, 1 week, 4 weeks were $1.7{\pm}0.5$, $1.0{\pm}0.3$, $0.9{\pm}0.2$, respectively, and, $1.7{\pm}0.5$, $1.1{\pm}0.4$, $1.0{\pm}0.4$, respectively for plaque index, and $3.0{\pm}0.5$, $1.7{\pm}0.5$, $1.4{\pm}0.4$, respectively for proximal plaque index. proximal plaque index at 4 weeks was significantly different from that of dental floss. 4. The result of questionnaire showed that the two types of device were both satisfactory, however, embossed new dental pick had higher preference as well as satisfaction. As a result, embossed new dental pick is thought to be clinically effective for its simplicity and good accessibility.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.511-521
• /
• 1996

Periodontal pocket is one of the most frequently developed clinical feature on the teeth with periodontal disease. In order to determine the gingival curettage effect of intrapocket irradiation of a pulsed Nd : YAG laser on periodontally involved teeth, bilateral 60 teeth with $4{\sim}6mm$ in probing pocket depth 1 week after supragingival scaling were selected. On half of them the intrapocket irradiation($300{\mu}m$ fiber optic, 1.5W power, for 2min.) of a pulsed-Nd : YAG laser(EL.EN.EN06O, Italy) was applied as the lased group. On the contralateral 30 teeth the subgingival curettage was accomplished by Gracey curettes as the curattage group. The periodontal pocket tissues were surgically excised by the modified Widman flap technique immediately after the intrapocket irradiation or subgingival curettage, subsequently fixed with 10% neutral formalin, sectioned in $4{\sim}6{\mu}m$ thickness, and stained with hematoxylin-eosin. Surface characteristics and incomplete removal of the pocket epithelium were evaluated under light microscope. And the difference between the lased group and the curettage group was statistically analyzed by Chi-square test in Microstat program. The results were as follows ; 1. The plane surface was observed more frequently in the curettage group(73.3%) than in the lased group(23.3%), and the rough surface was observed more frequently in the lased grOoup(63.3%) than in the curettage group(6.7%)(p<0.05). 2. The rate of incomplete removal of the pocket epithelium was relatively high in both the lased group(76.6%) and the curettage group(86.6%), and there was no significant difference between the lased group and the curettage group(p>0.l). The results suggest that the further studies including various power control of laser should be succeeded in order to obtain more favorable results by the intrapocket irradiation of a pulsed Nd:YAG laser than the subgingival curettage with Gracey curettes.