• Korean Journal of Weed Science
• /
• v.14 no.1
• /
• pp.49-55
• /
• 1994

A study was conducted to determine the effect of depth of burial, soil temperature and/or moisture on tuber sprouting of E, kuroguwai. Tubers were evenly distributed in the upper 30cm of soil. Tuber weight increased as depth of tuber formed increased. No dormancy in newly formed tubers was found, whereas mature tubers were dormant. When new tubers were subjected both to continuous $5^{\circ}C$ and to gradual decreasing temperatures regimes ranged from 20 to $1^{\circ}C$ for 30 days, the tubers remained non-dormant. Viability of tubers was reduced when buried at 5cm depth in dry and moist soil conditions, but no reduction was obtained when buried at 25cm depth, regardless of soil moisture conditions employed. Percent sprouting of tubers buried at 25cm depth increased with increasing duration of burial in three soil moisture conditions studied, wherease in dry and moist conditions percent sprouting of tubers buried at 25cm depth increased by 60-day burial and thereafter decreased. In submerged condition, tuber sprouting was greater when buried at 5cm depth than when buried at 25cm depth, and increased as duration of burial increased at the both depths.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.34-38
• /
• 2014

Carburizing treatments are the important way to developing fatigue strength and wear resistance. It is well known that the case depth is one of the most significant parameters determining fatigue strength. In this study, 3-point bending fatigue test was conducted to evaluate fatigue strength for the carburized depth with 18CrNiMo7-6 steel. As a result, fatigue strength increased with effective case depth decreased. It is shown that hardness in case hardened layer played principal role in the fatigue strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.799-804
• /
• 2002

This paper is mainly Intended to show an effect of foundation depth on heat of hydration in mass concrete. From the analysis, it was found that the foundation depth which is not affected by the heat conduction is more than 5 m. But this study shows that, an optimum foundation depth for the FEM analysis for heat of hydration in mass concrete is approximately 1 m from this study. And in order to study tile significance of various parameters, a sensitivity analysis of heat transfer in mass concrete is performed and the amount of heat liberated at complete hydration of unit weight of cement and the reaction velocity of hydration are the most sensitive parameters factors of other various parameters.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.302-307
• /
• 2004

The major flow-induced vibration mechanisms such as fluid-elastic and turbulence excitation can cause the various types of wear of the steam generator tubes in unclear power plant. It is generally accepted that the tube wear due to vibration is affected by the presence of gap clearance between tube and support plate. Connors showed that the tube wear depth could be estimated by using the relationship between wear volume and sliding distance for contact time. Au-Yang predicted the wear depth by using the nonlinear characteristics of normal work rate to contact time. In this study the effect of gap size on the steam generator tubes wear is analyzed by deriving the wear depth versus normal work rate relationship from these previous results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.5-5
• /
• 2010

The depth of the object pointed by the laser beam is computed depending on the pixel position on the CCD There involved several number of internal and external parameters such as inter-pixel distance, focal length, position and orientation of the system components in the depth measurement error. In this paper, it is shown through the error sensitivity analysis of the parameters that the most important parameters in the sense of error sources are the angle of the laser beam and the inter pixel distance. Also, the calibration technique to minimize their effect for the depth computation is proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.25-32
• /
• 1994

A nonlinear control algorithm for the depth control of underwater vehicles is presented. In order to consider the deadzone effect of the flow control valve, a nonlinear fuzzy logic controller (FLC) is synthesized and combined with a linear proportional-derivative-acceleration (PDA) controller, which is called the PDA/FLC controller. And to show the effectiveness of the PDA/FLC control system, it is compared with the linear PDA control system through computer simulation. It is found that the PDA/FLC control system is suitable one to maintain the desirable depth of underwater vehicles with deadzone.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.2
• /
• pp.168-173
• /
• 2014

The effect of critical minimum depth in the coastal region on storm surges was examined using a three-dimensional primitive equation model (POM). Case studies using numerical experiments in a small coastal bay in the southern sea of Korea (Hanam Bay) have examined the 'critical depth' (CD) that stabilizes the numerical calculations. Dependence of the CD of typhoon tracks and tidal components such as M2, S2, O1, and K1 were examined. The model results clearly demonstrated that the numerically unstable state of the calculation was caused by the coarse resolution of sea surface elevation.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.68-72
• /
• 2002

This work investigates the transient cooling characteristics of an Infrared (IR) detector cryochamber, which has a critical effect on the cooling load. The current thermal modeling considers the conduction heat transfer through a cold well. the gaseous conduction due to outgassing. and the radiation heat transfer. The transient cooling Performance. i.e. the penetration depth and cooling load, is determined using a finite difference method. It is found that the penetration depth increases as the bore conductivity increases. Gaseous conduction and radiation hardly affect the penetration depth. The transient cooling load increases as the bore conductivity increases. The effects of gaseous conduction and radiation on transient heat transfer are weak at initial stages of cooling. However, their effects become significant as the cooling Process Proceeds.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.103-106
• /
• 2016

3D technology is main factor in Augmented Reality. Depth map is essential to make cubic effect using 2d image. There are a lot of ways to construct Depth map. Among them, stereo matching is mainly used. This paper presents how to generate depth map using stereo matching. For stereo matching, existing Dynamic programming method is used. To make accurate stereo matching, High-Boost Filter is applied to preprocessing method. As a result, when depth map is generated, accuracy based on Ground Truth soared.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.115-127
• /
• 2015

The aim of this study is to develop a simplified formula for added mass coefficients of a two-dimensional floating body moving vertically in a finite water depth. Floating bodies with various sectional areas may represent simplified structure sections transformed by Lewis form, and can be used for floating body motion analysis using strip theory or another relevant method. Since the added mass of a floating body varies with wave frequency and water depth, a correction factor is developed to take these effects into account. Using a developed two-dimensional numerical wave tank technique, the reference added masses are calculated for various water depths at high frequency, and used them as basis values to formulate the correction factors. To verify the effectiveness of the developed formulas, the predicted heave added mass coefficients for various wetted body sections and wave frequencies are compared with numerical results from the Numerical Wave Tank (NWT) technique.