• 열처리공학회지
• /
• 제6권4호
• /
• pp.223-229
• /
• 1993

Extensive reseach has been performed on the process condition-micro structure-stress relations of TiN film. The various proposed models are mainly base on physical vapor deposition processes. Especially the study on the micro-structure and deposition condition has not been sufficient in TiN deposited by PECVD. In this study, therefore, we discussed the morphological changes of TiN films by PECVD with different temperature and pressure, and compared it with the structure zone model. We could find out that the oxygen and chlorine contents and the texture coefficient increased with deposition temperature, and the morphology of TiN transformed from Zone 1 to Zone T, but deposition pressure didn't remarkly affected.

• 반도체디스플레이기술학회지
• /
• 제6권3호
• /
• pp.41-45
• /
• 2007

The (SrCa)$TiO_3$(SCT) thin films were deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method according to the deposition condition. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of $100{\sim}500[^{\circ}C]$. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about $18.75[{\AA}/min]$ at the optimum condition. The composition of SCT thin films deposited on Si substrate is close to stoichiometry (1.081 in A/B ratio). The maximum dielectric constant of SCT thin film was obtained by annealing at $600[^{\circ}C]$.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.129-132
• /
• 2003

Yttria stabilized zirconia (YSZ) buffer layers were deposited by a metal organic chemical vapor deposition (MOCVD) technique using single liquid source for the application of YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) coated conductor. Y:Zr mole ratio was 0.2:0.8, and tetrahydrofuran (THF) was used as a solvent. The (100) single crystal MgO substrate was used for searching deposition condition. Bi-axially oriented CeO$_2$ and NiO films were fabricated on {100}〈001〉 Ni substrate by the same method and used as templates. At a constant working pressure of 10 Torr, the deposition temperatures (660~80$0^{\circ}C$) and oxygen flow rates (100~500 sccm) were changed to find the optimum deposition condition. The best (100) oriented YSZ film on MgO was obtained at 74$0^{\circ}C$ and $O_2$ flow rate of 300 sccm. For YSZ buffer layer with this deposition condition on CeO$_2$/Ni template, full width half maximum (FWHM) values of the in-plane and out-of-plane alignments were 10.6$^{\circ}$ and 9.8$^{\circ}$, respectively. The SEM image of YSZ film on CeO$_2$/Ni showed surface morphologies without microcrack.k.

• 한국자기학회지
• /
• 제12권6호
• /
• pp.224-230
• /
• 2002

직경 200mm의 실리콘 기판에 균일한 코발트 금속박막을 증착하는 DC-스퍼터 장비에서 공정변수는 증착온도, 증착압력, DC power로 하고 종속변수(response)는 면저항, 면저항 균일도로 하는 '||'&'||'quot;통계적 실험방법'||'&'||'quot;을 채택한 실험을 수행하여 Co 박막의 공정 특성에 대해 다음과 같은 결과를 얻었다 '||'&'||'quot;통계적 실험방법'||'&'||'quot;을 이용한 Co박막의 공정 특성을 조사하는 본 실험에서 면저항과 면저항 균일도는 0.05 이하의 significance수치. 낮은 RMS error, 0.91 이상의 R-sq수치로부터 실험의 우수한 신뢰성을 확인하였다. 면저항에 대한 공정변수의 영향성은 증착온도가 -1.83$\Omega$/$\square$의 감소효과, 증착압럭이 1.17$\Omega$/$\square$의 증가 효과. DC power가 -0.65$\Omega$/$\square$의 감소 효과로 실험 구간에서 일정한 경향의 영향성을 보였으며, 면저항 균일도에서는 증착온도에 의해 $25^{\circ}C$~147$^{\circ}C$에서 -4.04%의 감소로 증착온도에 가장 민감함을 확인하였다. Co 박막의 최적 증착 조건은 증착온도 $25^{\circ}C$, 증착압력 12mTorr, DC power 1500 W로 예상되었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.436-440
• /
• 2003

The (S $r_{0.85}$C $a_{0.15}$)Ti $O_3$(SCT) thin films were deposited on Pt-coated electrode(Pt/TiN/ $SiO_2$/Si) using RF sputtering method according to the deposition condition. The optimum conditions of RF power and Ar/ $O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about 18.75[$\AA$/min] at the optimum condition. The composition of SCT thin films deposited on Si substrate is close to stoichiometry (1.102 in A/B ratio). The capacitance characteristics had a stable value within $\pm$4[%]. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films were observed above 200[kHz]. SCT thin films used in this study showed the phenomena of dielectric relaxation with the increase of frequency.ncy.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.72.1-72.1
• /
• 2010

Thin film a-Si solar cells deposited by PECVD have many advantages compared to the traditional crystalline Si solar cells. They do not require expensive Si wafer, the process temperature is relatively low, possibility of scaling up for mass production, etc. In order to produce thin film solar cells, understanding the relationship between the material characteristics and deposition conditions is important. It has been reported by many groups that the band gap of the a-Si material and the deposition rate has an linear relationship, when RF power is used to control both. However, when the process pressure is changed in order to control the deposition rate and the band gap, a diversion from the well known linear relationship occurs. Here, we explain this diversion by the deposition condition crossing different plasma regions in the Paschen curve with a simple model. This model will become a guide to which condition a-Si thin films must be fabricated in order to get a high quality film.

• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2095-2099
• /
• 2007

본 연구에서는 LCD, 이미지 센서 등의 개별 소자인 비정질 실리콘 박막 트랜지스터에서 게 이트 유전층 및 절연층으로 사용되는 비정질 질화 실리콘 박막을 사일랜($SiH_4$) 및 암모니아가스를 사용해서 PECVD(Plasma Enhanced Chemical Vapor Deposition) 진공 증착장비로 최적의 비정질질화실리콘 박막 증착 조건을 확립한다. 먼저 반응실의 진공도, rf 전력, $SiH_4$ 및 질소 그리고 암모니아가스의 flow rate를 변화시키면서 형성된 박막의 특성을 조사한다. 계속해서 다른 변수를 고정시킨 상태에서 rf 전력을 변화시키고 다음에는 반응실의 진공도 등을 변화시켜 최적의 증착조건을 확립한다. 이렇게 확립된 증착조건을 사용하여 비정질질화실리콘박막을 제작하여 특성을 측정한 결과 우수한 성능을 나타냈음을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권9호
• /
• pp.378-382
• /
• 2003

Transparent conductive oxides (TCO) are necessary as front electrode for most thin film solar cell. In our paper, transparent conducting aluminum-doped Zinc oxide films (ZnO:Al) were prepared by rf magnetron sputtering on glass (Corning 1737) substrate as a variation of the deposition condition. After deposition, the smooth ZnO:Al films were etched in diluted HCI (0.5%) to examine the electrical and surface morphology properties as a variation of the time. The most important deposition condition of surface-textured ZnO films by chemical etching is the processing pressure md the substrate temperature. In low pressures (0.9mTorr) and high substrate temperatures ($\leq$$300^{\circ}C$), the surface morphology of films exhibits a more dense and compact film structure with effective light-trapping to apply the silicon thin film solar cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.333-334
• /
• 2008

The SCT thin films were deposited on Pt-coated electrode using RF sputtering method according to the deposition condition. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of 100~500[$^{\circ}C$]. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about 18.75[$\AA$/min] at the optimum condition. The maximum dielectric constant of SCT thin film was obtained by annealing at $600^{\circ}C$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권12호
• /
• pp.576-580
• /
• 2006

The $(Sr_{0.85}Ca_{0.15})TiO_3(SCT)$ thin films were deposited on Pt-coated electrode $(Pt/TiN/SiO_2/Si)$ using RF sputtering method according to the deposition condition. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of $100{\sim}500[^{\circ}C]$. The optimum conditions of RF power and $Ar/O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about $18.75[{\AA}/min]$ at the optimum condition. The composition of SCT thin films deposited on Si substrate is close to stoichiometry (1.102 in A/B ratio). The maximum dielectric constant of SCT thin film as obtained by annealing at $600^{\circ}C$.