• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.291-291
• /
• 2010

Organic solar cells have attracted much interest due to the potential advantage of the lightness, simple solution processing and flexibility. Until recently, the focus of organic solar cells research has been on optimization of material processing to improve the power conversion efficiency. However, area scaling is an important position for alternative to the market dominating solar cells. Spray deposition technologies have advantage of less material wastage and possibility of large scale photoactive area coating when compared with spin coating process. We investigated the performance of organic solar cells as a function of active area using two types of deposition process. The commonly used process is spin coating which can be fabricated organic materials deposition for devices. Spray deposition process compare with spin coating for large-area organic solar cells. The spray deposition organic layer shows excellent performance up to the active area of $4\;cm^2$ with the PCE of ~3.0 % under AM.1.5 simulated illumination with an intensity of $100mW/cm^2$. This indicates that the spray deposition process can be used as a mass production process for evaluating large-area organic solar cells.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.12-19
• /
• 2000

The purpose of this study is to evaluate the channel changes according to the temporal and spatial distribution of the deposition area by the vegetation invasion in Kyesung-river. The deposition area mainly occurred by landslide and debris flow from the headwater channel. And also the movement of subsequent downstream depends upon the site of deposits by a varity erosional processes. As the age of deposition area is older, it had a tendency to stable by plant invasion relatively. The vegetations grown in deposition area were very effective to estimate a historical deformation process of river-bed occurred by landslide. The vegetations around deposition area consisted of the same as tree species grown in forest area of circumference like Pinus densiflora, Styrax japonica, Quercus acutissima and Salix gracilistyla. If the torrential stream is flooding, the deposition area of 1 to 5 years can be change to the channel easily. Deposition area of 11 to 23 years had a high river-bed because it passed long time since deposited, and amount of sedimention is much more in wide than in narrow channel. It is consider that the change of channel had many influenced by the span of survial time, scale and movement frequency of deposition area after the vegetation invasion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.512-518
• /
• 2006

In this paper, we investigated the deposition of pentacene thin film on a large area substrate by Organic Vapor Phase Deposition(OVPD) and applied it to fabrication of Organic Thin Film Transistor(OTFT). We extracted the optimum deposition conditions such as evaporation temperature of $260^{\circ}C$, carrier gas flow rate of 10 sccm and chamber vacuum pressure of 0.1 torr. We fabricated 72 OTFTs on the 4 inch size Si Wafer, Which produced the average mobility of $0.1{\pm}0.021cm^2/V{\cdot}s$, average subthreshold slope of 1.04 dec/V, average threshold voltage of -6.55 V, and off-state current is $0.973pA/{\mu}m$. The overall performance of pentacene TFTs over 4 ' wafer exhibited the uniformity with the variation less than 20 %. This proves that OVPD is a suitable methode for the deposition of organic thin film over a large area substrate.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.59-69
• /
• 2021

Directed energy deposition (DED) is an additive manufacturing technology involving a focused high-power laser or electron beam propagating over the substrate, resulting in melt pool formation while simultaneously supplying metal powder to the melt pool area to deposit the material. DED is performed to repair and strengthen parts in various applications, as it can be easily integrate local area cladding and cross-material deposition. In this study, we characterize stainless steel 316 L parts fabricated via DED based on various deposition conditions and geometries to widen the application of DED. The deposition characteristics are investigated by varying the laser power and powder feed rate. Multilayer deposition with a laser power of 362 W and a powder feed rate of 6.61 g/min indicate a height closest to the design value while affording high surface quality. The microhardness of the specimen increases from the top to the bottom of the deposited area. Tensile tests of specimens with two different deposition directions indicate that horizontally long specimens with respect to a substrate demonstrate a higher ultimate tensile strength and yield strength than vertically long specimens with lower elongation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3840-3847
• /
• 1975

With 30 excisting reservoirs in the Chin-Young area, the Sedimentation of the reservoirs has been calculated by comparing the present capacity with the original value, which revealed its reduced reservoir capacity. The reservoirs has a total drainage area of 3l4l ha, with a total capacity of 43.23 ha-m, and are short of water supply due to reduction of reservoir capacity, Annual sedimentation in the reservoir is relation to the drainage area, the mean of annual rainfall, and the slop of drainage area. The results of obtained from the investigation are summarized as follows: (1) A Sediment deposition rate is high, being about 7.03㎥/ha of drainage area, and resulting in the overage decrease of reservoir capacity by 16.1%. This high rate of deposition coule be mainly attributed to the serve denudation of forests due to disorderly cuttings of tree. (2) An average unit storageof 116mm as the time of initial construction is decreased to 95.6mm at present. This phenomena cause a greater storage of irrigation water, sinceit was assumed that original storage quantity itself was already in short. (3) A sediment deposition rate as a relation to the capacity of unit drainge area is as follow: Qs=1.27(C/A)0.6 and standard deviation is 185.5㎥/$\textrm{km}^2$/year. (4) A sediment deposition rate as a relation to the mean of annual rainfall is as follow: Qs=21.9p10.5 and the standard deviation is 364.8㎥/$\textrm{km}^2$/year. (5) A sediment deposition rate as a relation to the mean slop of drainage area is follow: Qs=39.6S0.75 and the standard deviation is 190.2㎥/$\textrm{km}^2$/year (6) Asediment deposition rate as a relation to the drainage area, mean of rainfall, mean of slope of drainage area is: Log Qs=0.197+0.108LogA-6.72LogP+2.20LogS and the standard deviation is 92.4㎥/$\textrm{km}^2$/year

• Water for future
• /
• v.9 no.2
• /
• pp.67-75
• /
• 1976

With 9 existng reservoirs selected in the Sab-Gyo River Basin, the sedimentation of the reservoirs has been calculated by comparing the present capacity with the original value, which revealed its reduced reservoirs capacity. The reservoirs has a total drainage area of 6,792 ha, with a total capacity of 1,204.09 ha-m, and are short of water supply due to reduction of reservoirs capacity. Annual sedimention in the reservcire is relation to the drainage area, the mean of annual rain fall, and the slop of drainage area. The results of obtained from the investigation are summarized as follow; (1) A sediment deposition rate is very high, being about $9.19{m}^3/ha$ of drainage area, and resulting in the average decrease of reservoir capacity by 19.1%. This high rate of deposition could be mainly attributed to the serve denvdation of forests due to disor derly cuttings of tree. (2) An average unit storage of 415.8mm as the time of initial construation is decreesed to 315.59mm at present, as resultting, we could'nt supply water at 566.24ha. (3) A sediment deposition rate as a relation to the capacity of unit drainage area is as follow; $Qs=1.43 (c/a)^{0.531}$ (4) A sediment deposition rate as a relation to the mean of annval rainfall is as follow; $Qs=672.61 p^{0.024}$ (5) A sediment deposition rate as a relation to the mean slop of drainage area is follow; $Qs=267.21 S^{0.597}$

• Journal of Environmental Health Sciences
• /
• v.20 no.2
• /
• pp.39-54
• /
• 1994

Dry and wet deposition samples were continuously collected by deposit gauge. In Bulkwang area of Seoul and Kanghwa in west coastal area of Korea. In order to evaluate the level of air pollution and its chemical composition, Bulkwang area located in Seoul and Kanghwa in west coastal area were chosen for sampling site. dry deposition concentrations, pH, electric conductivity and water soluble ion concentrations of deposit gauge were analysed. The results of comparison between urban area and coastal area were summarized as follows. Mean concentrations of dry deposition in Bulkwang was 2.807 ton/km$^2$/month (range: 5.171~1.128 ton/km$^2$/month) while that in Kanghwa was 1.990 ton/km$^2$/month (range: 3.358 ~ 1.084 ton/km$^2$/month), which showed a significant difference between two areas. The rainfall during the period from June to September in 1990 recorded 1859.7 mm which was 78.8% of its mean amount in Seoul, and 1846.9 mm which was 81.6% that of Kanghwa. In Bulkwang area, correlation coefficients of deposit chemical composition were 0.95 for SO$_4^{-2}$ and Na$^+$, 0.94 for SO$_4^{-2}$ and NH$_4^+$, 0.93 for CI$^-$ and NH$_4^+$ and 0.85 for Cl$^-$ and Ca$^{2+}$, respectively. Then, the results indicate that sulfates such as $Na_2SO_4$, $(NH_4)_2SO_4$, and CaSO$_4$ were the major chemical state of deposit. In Kanghwa area, it was considered that NaCl, $NH_4NO_3$, NaNO$_3$, and $Ca(NO_3)_2$ were the major chemical state of deposit.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.244-246
• /
• 1991

Recently, a study on LB ultra thin film of molecular size is widely performed. To make use of LB ultra thin film in engineering applications, it is important to investigate how uniformly Langmuir film is deposited on a substrate. In this paper, to confirm the uniformity of film deposition, the relation between the monolayer numbers deposited and its ratio is investigated by deposition of the Y type and Hetero type LB film. If films are deposited ideally, the deposition ratio will become 1.0. From the experimental results, it can be suggested that the deposition of LB film is done well, as we obtained an approximate value 1.0 by the calculation of deposition ratio of L film area and LB film deposition area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.49-62
• /
• 2005

Lake Paldang is a main resource of drinking water for 20 million people in the greater Seoul area. Dry deposition amounts of nitrogen and sulfur were estimated for three typical days in each season over the watershed of Lake Paldang. Models- 3/CMAQ (Community Multiscale Air Quality) and MM5 (Mesoscale Model) were used to predict air quality and meteorology, respectively. Aerosols as well as gaseous pollutants were considered. Nitrogen was mainly deposited in the form of HNO, while most of sulfur was deposited in the form of SO$_2$. Contribution of secondary pollutants was the largest in fall since they were transported from the greater Seoul area. However, contribution of secondarily-formed particulate pollutants to the nitrogen deposition was the largest in winter because semi-volatile ammonium nitrate favors lower temperature. Annual deposition amounts of nitrogen and sulfur were 37% and 26% of their emission amounts, respectively, over the watershed of Lake Paldang. Higher value of the nitrogen deposition showed a more influence of pollutants emitted in the greater Seoul area.