• 제목/요약/키워드: deposit formation

검색결과 260건 처리시간 0.022초

엔진 오일 열화와 피스톤 온도가 카본 디포짓 형성에 미치는 영향 Part I-가솔린 엔진의 디포짓 형성 특성 (The Effect of Gasoline Engine Oil Degradation and Piston Temperature on Carbon Deposit Formation; Part I-Characteristics of deposit formation on gasoline engine)

  • 김중수;민병순;이두순;오대윤;최재권
    • Tribology and Lubricants
    • /
    • 제13권4호
    • /
    • pp.33-39
    • /
    • 1997
  • In order to establish a new temperature criterion to prevent the pistons from ring sticking due to deposit formation, bench test and engine test were performed. The effects of oil degradation and temperature on deposit formation was studied by a modified panel coking test. Oil degradation was analyzed by FTIR. Oil oxidation and nitration were selected as a factors to evaluate oil degradation. Bench test results show that oil oxidation is more effective to the deposit formation than oil nitration. And the temperature increase accelerates deposit formation and deposit formation increase rapidly above 26$0^{\circ}C$. Especially, in case of degraded oil, the deposit formation increases so rapidly that ring sticking can occur. The effect of piston temperature on the deposit formation was confirmed by engine test.

엔진 오일 열화와 피스톤 톱링 그루브 온도가 카본 디포짓 형성에 미치는 영향 Part II-디젤 엔진의 디포짓 형성 특성 (The Effect of Engine Oil Degradation and Piston Top Ring Groove Temperature on Carbon Deposit Formation Part II - The Deposit Formation Characteristics of Diesel Engine)

  • 김중수;민병순;오대윤;최재권
    • Tribology and Lubricants
    • /
    • 제14권4호
    • /
    • pp.108-113
    • /
    • 1998
  • In order to investigate the characteristics of top ring groove deposit formation in diesel engine, engine test and simulation test were performed. From component analysis of used oils sampled from actual running engines, soot content in engine oil was selected as a main parameter for evaluating oil degradation. Deposit formation is highly related to soot content in lubricating oils. And high soot content oil accelerates deposit formation even in low temperature region below 26$0^{\circ}C$. In low temperature region below 26$0^{\circ}C$, deposit formation rate is mainly affected by top ring groove temperature. However, in high temperature region above 26$0^{\circ}C$, deposit formation rate is affected by soot content as well as top ring groove temperature. Therefore, soot content as well as top ring groove temperature should be kept a certain level in order to prevent troubles due to carbon deposit formation.

삼한(三韓) 장군(將軍) 광산(鑛山) 조사(調査) 보문(報文) (Report on the Sam Han Chang Gun Manganese Deposits)

  • 황인전
    • 자원환경지질
    • /
    • 제1권1호
    • /
    • pp.9-34
    • /
    • 1968
  • Manganese ore deposits of the Samhan Changgun Properties are located at the valley of west-lope-side of Changgun-bong (1132m) occupied over the Myon border between Sochon-myon and Jaesan-myon Pongwha-gun, Kyongsang-Pukdo. Geology of the more property and it's vicinity consists of Wonnan formation and Yulri formation of pre-Cambrain and Changgun limestone formation, Mica-schist formation, quartizite formation and Jaesan formation (containing coal bearing zone the unknown age. And granites and dykes were intruded into the above formation later. 1. Management deposits is embedded the formation of Janggun limestone especially Contact zone in the contact zone to of Chunyang Granite limestone enclosed by Granite, and Maginal zone of fault line in the limestone. Therefore, Chunyang Granite is Closely related to ore deposit. Pegmatite which is near by ore deposit was intruded before mineralization and it seems to be a channelway of ore solution. The most important ore deposits of property grouped into south deposit, east deposit, east-Gachon deposit, South-Gachon deposit, Durimgok deposit and West deposit, out-crops at several place. Besides these deposits there also are several prospects on outcrop scathered. Hydrothermal alteration take place strongly in the well rock and it's sequence are Characterized as following; 1) Dolomitization 2) Carbonization 3) Mamgamotozation 4) Pyritization 5) Silicification 6) Oxidation 2. The grade of manganese dioxide is up to Mn 45% in Maximum, but generally, averaging Mn 30~35% of high grade ore and averaging Mn 30~32% of manganese carbonates are mined in his property.

  • PDF

크롬계 이중도금층 제조 및 특성평가 (Fabrication of Chromium-based Double Layered Deposit)

  • 박상언;김동수;김만;장도연;권식철
    • 연구논문집
    • /
    • 통권31호
    • /
    • pp.127-133
    • /
    • 2001
  • In chromium electrodeposition, crack is inevitably accompanied by chromium layer. Behavior of crack formation and crack density were different from the plating conditions such as current density, temperature, waveform of applied current and so on. And cracks have an influence on the corrosion resistance of chromium deposit, because corrosion occurs through the network of cracks between deposit and substrate. Therefore, many researches have been achieved in order to remove the cracks in chromium deposit. Formation of double layers, Cr/Cr and Ni/Cr were investigated to increase corrosion resistance of chromium deposit in this study. As pretreatment prior to outer chromium coating, acid pickling and current control method were examined. Cracks in cross-section of each sample were observed with SEM and CASS(Copper modified acetic acid salt spray) test was performed to evaluate corrosion resistance. It was found that corrosion resistance of Cr/Cr and Ni/Cr double layers were superior to Cr or Ni single layer from the results of CASS test.

  • PDF

LPGdusfy 엔진의 피스톤온도 및 카본디포짓 형성에 관한 연구 (A Study on the Piston Temperatures and Carbon Deposit Formation in LPG Fuelled Engine)

  • 민병순;최재권;박찬준
    • 한국자동차공학회논문집
    • /
    • 제6권2호
    • /
    • pp.100-106
    • /
    • 1998
  • The wide open throttle performance and piston temperatures were measured by the change of fuel : gasoline and liquefied petroleum gas(LPG). Bench test method was developed and experimented to study the effect of temperature on the formation of carbon deposit. The bench test results were confirmed by measuring the piston temperature and observing the deposit production rate at an actual engine running condition. Results show that if the fuel of spark ignition engine is changed from gasoline to LPG, the output power decreases about 10% and the piston temperatures increase about 40~55$^{\circ}C$. In actual engine tests, because of this temperature increase, it was observed that the quantity of carbon deposit in the top ring groove increased in a big degree. Consuquently, it is known that the fing sticking may occur if the gasoline engine was rebuilt to LPG fuelled engine. Therefore, in order to preserve the durability of LPG fuelled engine, it is necessary to lower the piston temperature by hardware modificationor to reduce the carbon deposit by the improvement of engine oil.

  • PDF

천연 및 인공해수를 이용하여 제작한 환경친화적인 전착코팅막의 형성 특성 (Formation Characteristics of Environment Friendly Electrodeposit Films Formed in Natural and Synthetic Seawater Conditions)

  • 이명훈;이찬식
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권6호
    • /
    • pp.1000-1009
    • /
    • 2004
  • The environment friendly calcareous deposit films were formed on steel plates by electrodeposition technique in natural seawater and synthetic solutions such as dissolved $\textrm{Mg}^{2+}$ and $\textrm{Ca}^{2+}$ ions at various potential conditions. The influence of potential conditions on composition ratio, structure and morphology of the electrodeposited films were investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractor (XRD). Accordingly, this study was provided a better understanding of the composition between the growth of $\textrm{Mg(OH)}_2$ and that of $\textrm{CaCO}_3$ during the formation of calcareous deposit films on steel substrate under cathodically electrodeposition in synthetic and natural seawater. The results showed that the formation of good overall calcareous deposited film in seawater can be achieved by controlling the Ca/Mg ratio according to interfacial pH with the effective use of the electro deposition technique.

The Effectiveness of Monetary Policy in Fostering Investment in Jordan during the Period 1992-2020

  • ALNABULSI, Zaynab Hassan;ALRAWASHDEH, Salah Turki;LUTFI, Khalid Munther;SALAMEH, Rafat Salameh
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제9권9호
    • /
    • pp.39-47
    • /
    • 2022
  • This study explored the effectiveness of the measures taken by the Jordanian Central Bank embedded in its monetary policy in encouraging banks to support investment. It aimed to explore the impact of this monetary policy on supporting credit-related decisions and the monetary policies that aim to support investment in Jordan. The targeted tools of the monetary policy are: (Overnight Deposit Window Rate, money supply, and exports). The researchers carried out an analysis to measure the effectiveness of the monetary policy in fostering investment in Jordan during the period 1992-2020. They carried out the time series analysis. They explored the stationarity of the time series. They used the ARDL model. It was found that the Overnight Deposit Window Rate has a negative significant effect on the gross fixed capital formation. It was found that the money supply has a positive insignificant effect on gross fixed capital formation. The researcher recommends using Overnight Deposit Window Rate in a manner that is consistent with the intended investment-related goals.

장군 연-아연 광상의 모암변질대에서 산출되는 백색운모의 산상 및 화학조성 (Occurrence and Chemical Composition of White Mica from Wallrock Alteration Zone of Janggun Pb-Zn Deposit)

  • 유봉철
    • 광물과 암석
    • /
    • 제35권4호
    • /
    • pp.469-484
    • /
    • 2022
  • 장군 연-아연 광상은 남한의 4대(연화 광상, 신예미 광상, 울진 광상) 연-아연 광상중의 하나이었다. 이 광상 지질은 선캠브리아기의 원남층, 율리층군, 캠브리안기내지 오도비스기의 장산규암층, 두음리층, 장군 석회암층, 석탄기내지 이엽기의 동수곡층, 재산층, 쥐라기의 동화지층 및 이들을 관입한 중생대의 춘양화강암류로 구성된다. 이 연-아연 광상은 고생대 캠브리안기내지 오도비스기의 장군석회암층에 배태되는 열수교대형 광상에 해당된다. 이 광상의 연-아연 광화작용과 관련된 모암변질작용은 주로 능망간석화작용과 돌로마이트화 작용이 관찰되나 황철석화작용, 견운모화작용 및 녹니석화작용 등도 관찰된다. 모암변질작용은 연-아연 광체 에서 모암으로 감에 따라 연-아연 광체 -> 능망간석대 -> 돌로마이트대 -> 돌로마이트질 석회암대 -> 석회암 및 돌로마이트 대리암 변화된다. 백색운모는 모암변질대(능망간석화작용과 돌로마이트화작용)에서 Ca-돌로마이트, Ferroan ankerite, sideroplesite, 금홍석, 인회석, 유비철석, 황철석, 섬아연석, 방연석, 석영, 녹니석 및 방해석 등과 함께 중립내지 세립질 입단으로 산출된다. 이 백색운모의 화학조성은(K0.77-0.62Na0.03-0.00Ca0.03-0.00Ba0.00Sr0.01)0.82-0.64(Al1.72-1.48Mg0.48-0.20Fe0.04-0.01Mn0.03-0.00Ti0.01-0.00Cr0.00As0.01-0.00Co0.03-0.00Zn0.03-0.00Pb0.05-0.00Ni0.01-0.00)2.07-1.92 (Si3.43-3.33Al0.67-0.57)4.00O10(OH1.94-1.80F0.20-0.06)2.00로써 이론적인 이중팔면체형 운모류 값보다 Si가 높고 K, Na, Ca는 낮다. 또한 장군 연-아연 광상, 연화1 연-아연 광상 및 백전 금-은 광상의 모암변질대와 구문소일대 석회암에서 산출되는 백색운모는 백운모와 팬자이트에 해당되나 둔전 금-은 광상의 모암변질대에서 산출되는 백색운모는 백운모에 해당된다. 더불어 이들 광상의 모암변질대 및 구문소일대 석회암에서 산출되는 백색운모의 화학조성 변화는 주로 팬자이틱 또는 Tschermark 치환 메카니즘(장군 연-아연 광상), 주로 팬자이틱 또는 Tschermark 치환과 일부 illitic 치환 메카니즘(연화1 연-아연 광상, 둔전 금-은 광상, 백전 금-은 광상) 및 주로 팬자이틱 또는 Tschermark 치환과 일부 illitic 치환 및 Na+ <-> K+ 치환 메카니즘(구문소일대)에 의해 일어났음을 알 수 있다.

북한 무산 철광상과 중국 안산-번시 철광화대 지질학적 비교 (Geological Comparison Between Musan Iron Deposit in North Korea and Iron Deposits in Anshan-Benxi Area in China)

  • 김남훈;고상모;이범한
    • 한국광물학회지
    • /
    • 제31권3호
    • /
    • pp.215-225
    • /
    • 2018
  • 북한 무산 철광상과 중국 안산-번시 철광화대는 시생대 호상철광층으로 북중국 지괴의 동쪽 블록 중 용강 블록에 속한다. 무산 철 광상을 배태하는 변성퇴적암은 무산층군이고 안산-번시 철 광화대를 배태하는 변성퇴적암은 안산층군으로 이들은 주로 철질 규암, 각섬암, 편암, 혼성암으로 구성되어 있다는 공통점을 갖고 있다. 주 광종은 주로 철질 규암에 배태되어 있는 자철석이다. 광체의 모양은 무산 철 광상의 경우 습곡에 의해 말발굽 모양을 갖지만 안산-번시 철 광화대의 경우 대부분 층상의 모양을 갖는다. 호상철광층의 생성 연대는 무산 철 광상은 약 2.66-2.52 Ga이고, 안산-번시 철 광화대는 2.55-2.53 Ga로 보고되어 시기적으로 유사하며, 광상형은 모두 알고마 유형으로 알려져있다. 결론적으로 무산 철 광상과 안산-번시 철 광화대는 지질 및 형성 시기, 그리고 광상 특성이 매우 유사하다고 볼 수 있다.

춘천 연옥의 기원에 관한 지구화학적 연구 (Geochemical Study on the Genesis of Chuncheon Nephrite Deposit)

  • 박계현;노진환
    • 암석학회지
    • /
    • 제9권2호
    • /
    • pp.53-69
    • /
    • 2000
  • 춘천 연옥 광상의 기원을 연구하기 위하여 광상 및 주변 암석들에 대하여 방사기원 동위원소인 Sr과 Pb 동위원소, 안정 동위원소인 산소와 수소 동위원소, 희토류원소 등의 조성을 분석하였으며, 이러한 여러 지구화학적인 자료들을 종합하여 광화작용의 각 단계별 변화과정을 추적하였다. 연옥광상의 광화대 각 사료들은 모두 모암인 대리암에 비해 상당히 낮은 산소 동위원소 값을 가지며, 이는 광화작용의 모든 단계에서 낮은 {{{{ delta ^18 OMICRON }} 값을 갖는 지각내 순환수가 매우 중요한 역할을 하였음을 반영한다. 춘천 연옥 광상의 광화작용이 진행되어 대리암으로부터 조립질 성회규산염대, 전기 연옥대, 세립질 석회규산염대가 순차적으로 만들어지면서 {{{{ delta ^18 OMICRON }} 값이 지속적인 감소를 보인다. 광화작용으로 새로 만들어진 광물들은 기존 광물들과 산소 동위원소 불평형 관계를 보이며 이는 순환수 기원의 광화유체가 각 단계에서 상당한 물-암석 비율로 관여하였음을 지시한다. 한편 광상 시료들의 Sr 및 Pb 동위원소 값은 광상이 놓여있는 경기 변성암 복합체와 유사한 값을 가지며 이러한 현상 역시 지각내의 순환수가 광상형성에 중요한 역할을 하였음을 시사한다. 검토한 지구화학적 지표들은 종합하면 춘천연옥 광상의 형성에 관여한 광화용액의 대부분은 궁극적으로는 강수기원의 지표 순환수에서 유래하였으며 광상 주변의 암석으로부터 용출시킨 Sr과 Pb를 광화대에 공급한 것으로 판단된다.

  • PDF