본 연구는 치과기공사의 작업환경과 직무스트레스 정도를 분석하고 그 상관관계를 알아보기 위해 서울특별시, 인천광역시, 충남지역의 치과기공사 180명을 선정하고 자기 기입식 설문지를 이용하여 2009년 4월 6일에서 5월 20일까지 조사를 실시하였다. 수집된 자료의 분석결과는 다음과 같다. 1. 연구 대상자의 작업 환경정도를 분석한 결과 건강 항목에서 유의한 차이가 있었다(P<0.05). 작업환경 평균은 1.53 으로 높게 나타났다 2. 연구대상자의 직무 스트레스 유발정도를 분석한 결과 모든 변수에서 유의한 항목은 없었다. 직무 스트레스 평균은 3.44로 높게 나타났다. 3. 작업환경과 직무스트레스의 상관관계는 대부분의 변수가 역 상관관계 가 있는 것으로 나타나 작업환경이 나쁠수록 직무스트레스를 많이 받는 것으로 나타났다.
To provide physical therapy service of good quality keeping people healthy and obstain structural reformation coping with the demands of in medical service market to foreign intercourse on 21C, we should make legal system fer the physical therapy practice. Thus we suggest the Ministry of Health and Health and the authorities should, 1. Exclude the provision of physical therapist from the classfication of medical technician on the Medical Technician Law Article 2. and establish the independent Physical Therapist Law 2. Eliminate the provision of physician or dentist's guide the Medical Technician Law Article 1. or reform it to physician or dentist's request so that physical therapists may have a independent practice, or 3. Add the provision of the physical therapy center to the Medical Technician Law, the enforcement ordinances and enforcement regulations, such as the provision of optometrist or dental technician.
Purpose: In order to increase competitiveness for the growth and development of the dental laboratory industry, we plan to develop the dental laboratory industry. Methods: A total of 547 questionnaires were used as the final analysis data for the dental technicians from all over country participated in the 51st Korea Dental Technology Expo & Scientific Conference of the Korean Dental Technologist Association held in KINTEX from July 18 to 19, 2015. The questionnaire items consisted of 28 items in terms of general characteristics, questions about the methods to be pursued for the development of the dental laboratory industry, and recognition about the methods to be pursued to develop the dental laboratory industry. The collected data were analyzed by SPSS Ver. 21.0 for windows. Results: To improve the dental laboratory industry, actualization of dental laboratory products fee(41.2%) had the highest, followed by improving treatment of dental technician, standardization of dental laboratory products, direct bill of medical insurance, regulation of contract management on huge capital, and etc. The recognition of the measures to be pursued for the development of the dental laboratory industry was that dental laboratory products fee required to receive more than 20% of the dental prosthesis fee highest($4.62{\pm}0.76$). And to enlarge dental laboratories through M&A between dental laboratories is the lowest($3.39{\pm}1.26$). Conclusion: As a means to pursue the development of the dental laboratory industry, the actualization of dental laboratory products fee was proposed. Recognition also showed that dental laboratory products fee required to receive more than 20% of dental prosthesis fee was the highest. It is important to propose a reasonable dental laboratory products fee because it recognizes that it is necessary to promote economic growth in both development plan and awareness.
Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts and processing 3D object have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Defective human teeth are usually ground to be coped with special alloy coping which is hand-made by dental technician. This make dental technician to be difficult and take a long time Dental CAD/CAM Systems consist of two parts, data acquisition and milling. In this paper, a method is studied to mill object which is acquired 3D geometric data of the small object such as a die in stone model. This paper present a control program and a mechanical system for milling 3D object.
This study was carried out to understand the influence of dental technicians' image and major satisfaction on dental technology students' dropout intention. A questionnaire survey was administered to 273 students in the Department of Dental Technology. Frequency analysis, independent sample t-test, one-way ANOVA, and multiple regression analysis were performed. The results are as follows: The image of dental technicians differed significantly depending on factors such as school year, personality, whether a family member is a dental technician or not, reason for choosing a department, difficulty in one's own academic life, and disciplinary life adaptation (p<0.05). The image of dental technicians was seen to be positively perceived when the respondent had an affirmative personality, or had a dental technician among family members or chose the department for its uniqueness, or found no difficulty in academic life, and adapted well to a situational or environmental change. Major satisfaction of dental technicians was seen a meaningful difference in items such as school year, personality, awareness of dental technicians, reason for choosing a department, the difficulty in own academic life, and the disciplinary life adaptation (p<0.05). Individuals with high major satisfaction and low dropout intention included those with a positive personality, who think affirmatively about dental technicians, who chose a department owing to suiting the aptitude and interest or to the uniqueness of the major. The influential factors on dropout intention included general satisfaction out of major satisfaction, perspective and self-confident image among dental technicians, and an awareness of dental technicians. The establishment of a desirable image of dental technicians and the improvement in major satisfaction are considered likely to contribute to reducing the dropout intention of dental technology students.
The purpose of this thesis is to address the imbalance between supply and demand of dental lab technicians and to propose its solutions by analyzing the improvement of employment rate of graduates of dental technology schools in Daegu area and the supply and demand of the technician workforce. Preliminary and full-scale surveys were performed from Aug. 10 to Oct. 10 in 2008 on 150 junior students of dental technology schools who finished their on-the-job-training and 150 dental technicians who were working for dental laboratory in Daegu by self-assessment questionnaire. Followings are the findings of this study. First, regarding the gender of the dental technicians, 32.7% of respondents were female 67.3% were male. Concerning age, respondents younger than 29 years-old occupied the highest percentage(39.3%). With respect to the lab technology school they graduated, DaeguHealthCollege took the largest proportion of 87.3%. With regard to interpersonal relationship at the school, 58.0% of respondents felt their relationship 'smooth'. Second, about the motive of choosing to be a lab technician, the biggest proportion of the respondents(34.7%) replied that 'because it is professional'. Regarding the degree of satisfaction about the profession, 'so-so' was the answer with the biggest percentage(51.3%) followed by 'satisfied'(32.0%) and 'unsatisfied'(16.7%). It showed that respondents were generally satisfied with their major. Third, regarding relevance of on-the-job-training with 'preparation for the employment', highest percentage of both students and lab technicians(50.0%) replied 'so-so'. With respect to 'necessity of practical education', highest percentage of the students and lab technicians replied 'relating didactic education in college to the real world' with 52.7% and 40.7% respectively. With regard to 'the aim of on-the-sport-training', 'practical training of didactic education' was chosen by 54.0% and 47.3% respectively. Fourth, with regard to the 'types of college education advantageous for the employment', both students and lab technicians groups chose 'practical training' with the highest percentage. Concerning 'helpfulness of clinical training on employment', students answered 'so-so' and 'helpful' by 50.0% and 42.7% respectively and dental technicians replied similarly by 50.0% and 46.0% respectively. Fifth, with regard to the influence of financial factors on the supply and demand of dental technician(question #1), 68.0% of respondents agreed that 'salary plays key role in the supply and demand of the work force'. Concerning the question about working condition, respondents requested better working environment. With reference to interpersonal relationship at the laboratory, respondents replied that interpersonal relationship affects the duration of the employment it was found out that there were many conflicts with colleagues or dental office. Sixth, regarding the satisfaction about their profession according to the characteristics of the respondents more respondents were 'satisfied'(10.30 points) with their profession and 'unsatisfied' were 9.47 points and the difference was statistically significant(p<0.05). According to the findings of this study, practical education on campus and on-the-job-training are as important as didactic education at class due to the characteristics of dental technology major. It was found that more practical training is related to higher employment rate. Therefore, efficiency of on-the-job-training by college education should be increased raise employment rate of the graduates and reduce the unemployment. Up-to-date information needs to be promptly delivered and future vision should be presented to the students to raise their satisfaction about the profession. In addition, to reduce dental technician's frequent change of their workplace after facing with the reality of the profession after graduation, related organizations should make an effort to present better future than now.
우리나라의 구강보조인력 중 치과위생사 업무와 치과 근무 간호조무사의 업무가 상당히 겹쳐 있고, 진료실 내부로 치과기공사 및 병원코디네이터가 깊숙이 들어와 있어 각 직종간의 업무영역으로 인해 마찰을 빗고 있다. 그리하여 이러한 직종 간 명확한 업무의 구분과 업무범위에 대한 정책적 방안을 제시할 목적으로, 치과 병 의원에 근무하는 치과보조인력의 업무 실태에 대해서 치과위생사의 법정업무를 중심으로 한 10개의 업무를 빈도분석 및 분산분석을 이용하여 비교 제시하였다. 치과위생사의 법정 업무를 중심으로 한 10개의 업무 중 대표적인 항목 스켈링을 비교한 결과, 치과기공사가 9(75%)명, 간호조무사가 64(87.67%)명, 기타에 체크한 사람이 11(64.71%)명이 시행하고 있어, 치과위생사를 제외한 치과보조인력이 치과위생사의 법정고유 업무를 많이 시행하고 있는 것으로 나타났다. 따라서 치과의료기관이 필요한 인력을 충분히 갖추고, 구강보조인력의 역할과 업무범위에 대한 정책적 방안이 제시될 필요성이 권장된다.
Purpose: The purpose of this study is to supply basic data to establish new image for dental technicians by reflecting onto the education of dental technicians by grasping the image of dental technicians with the subjects of students in department of dental technology. Methods: It was studied with self-filling-in method through structured questionnaire from September 26, to October 21, 2011, with 421 subjects of the students in the department of dental technology in two colleges in Daegu. SPSS 18.0 for Windows was used to analyze the data, and frequency and percentage were used for statistic analysis, and correlation analysis and Multiple Linear Regression Analysis were used with mean and SD per each question. Results: It showed the highest recognition that the dental technicians is a 'specialist' as 4.66; the dental technicians has strong responsibility in his work as 4.42; the dental technicians takes an important role in improvement of public oral health as 4.39; and the dental technicians has professional intelligence and high technique as 4.33. So, it was found that they had image of professional and important role for oral health, and had their pride and selfconfidence as future dental technicians. Meanwhile, it showed that they had negative related-image as well as a job, that the dental technicians is too busy as 4.48; it requires improvement on image in the future as 4.27; it is a hard job with too much stress as 4.13. Conclusion: It is required for us and school to have continuous change and effort to make the students in the department of dental technology have positive mind for the dental technology to make them have pride for their job.
Purpose: The purpose of this study is to lay the groundwork for the development of appropriate training courses for a rapidly changing digital technology in the field of Dental technology. Methods: The subjects of this study were dental technicians, dental technology students, a professor of dental technology in Daegu and Gyeongbuk area and a self-administered structured questionnaire survey was conducted for 350 randomly selected people. Collected data were analyzed using SPSS Win 17.0 statistics program and analysis techniques include the frequency, percentage and cross-analysis. Results: The results of the survey are as follows. The usefulness of Major subjects was Full Denture laboratory (4.72 points), Dental Morphology (4.71 points), Crown and Bridge laboratory (4.69 points) in the instructor's group. The usefulness of Major subjects was Dental Morphology (4.56 points), Full Denture (4.36 points), Crown and Bridge laboratory (4.69 points) in the student's group. The usefulness of Major subjects was Dental Morphology (4.58 points), Dental Morphology laboratory (4.34 points), Partial Denture laboratory (4.30 points) in the dental technician's group. Subject with the highest usefulness of required course to open was CAD/CAM lecture and laboratory, the highest proportion of 91.2% and Implant laboratory was very useful (91.2%) in the instructor's group. Subject with the highest usefulness of required course to open was CAD/CAM lacture and laboratory, the highest proportion of 90.0% and Implant laboratory was very useful (91.2%) in the student's group. Subject with the highest usefulness of required course to open was CAD/CAM lacture and laboratory, the highest proportion of 91.2% and Implant laboratory was very useful (90.2%) in the dental technician's group. Conclusion: Semester of the subjects was required establishment of CAD/CAM lecture and laboratory in the third year first semester (85.1%) and Implant laboratory in the third year second semester the third year was the highest proportion of 94.1% in the instructor's group. 87.0% of students need to open CAD/CAM lacture and laboratory in the third year first semester, Implant laboratory in the third year second semester the third year was the highest proportion of 85.0% in the student's group. Semester of the subjects was required establishment of CAD/CAM lecture and laboratory in the third year first semester (81.0%) and Implant laboratory in the third year second semester the third year was the highest proportion of 80.0% in the dental technician's group.
We are studied the improvement syllabus of subjects in demtal technological curriculum that those are Tooth Morphology, Science of Dental Materials, Inlay Technology, Occlusal Anatomy and Dental Orthodontic Technology. Those improvement syllabus will be contributed to the achievement of national educational standards and arrangement to the technical performance of medical imaging procedure with the smallest exposure dose and the personal attributes of compassion, courtesy and concern in meeting the needs of the patients, and have a good knowledge of the dental technician professional competence.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.