• Journal of Korean society of Dental Hygiene
• /
• v.7 no.3
• /
• pp.329-342
• /
• 2007

This study was conducted in order to know whether DFS questionnaire which can measure dental fear is suitable for dental fear measuring method and to know effect of dental fear on dental use behavior and treatment need degree. This survey was conducted from May 1, 2007 to May 31, 2007. A total of 281 surveys eligible among all the collected surveys were used in the analysis. Collected data were analyzed by using SPSS 12.0. The obtained results were as follows: 1. Based on the reliability analysis, we concluded that the questionnaire of dental fear was reliable, and the Cronbach' s alpha coefficients of the all subscales were more than 0.6. 2. Among the dental fear of 3 factors, treatment fear cause stimulation factor was higher than the others. Most of all, following two situations(when preparation was made and when people hear dental instrument operating sound) are the highest in the treatment fear. And women are higher than men in every item. 3. In the Dental treatment need degree caused by dental fear degree, high fear group was $4.76{\pm}1.954(M{\pm}SD)$ which was higher than that of low fear group.(low fear group was $4.07{\pm}2.184(M{\pm}SD)$. In conclusion, dental fear and dental treatment need degree are related each other.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.6
• /
• pp.951-959
• /
• 2014

Objectives: The purpose of this study was to find out the fear of dentist care, subjective recognition of dental health, and quality of life in the male high school students and to analyze the influencing factors on dental health care. Methods: A self-reported questionnaire was filled out by 243 special high-school in Deagu province from March 3 to March 14, 2014. The questionnaire consisted of general characteristics of the subjects(5 questions), subjective recognition of health and activities to improve health(6 questions), dental fear(20 questions), oral health related quality of life(16 questions). The instrument for dental fear was adapted from measured by Berggren Dental Fear Survey(DFS). A total of 20 DFS questions included treatment avoidance(8 questions), stimulus reaction(6 questions), and physiological reaction(5 questions) and score by Likert 5 scale. Cronbach alpha was 0.974 in the study. Oral health related quality of life was measured by 16 questions of CPQ11-14 for the adolescents by Lau. CPQ11-14 consisted of oral symptoms(4 questions), functional restriction(4 questions), and emotional wellbeing(4 questions). The instrument was score by Likert 5 scale and Cronbach alpha was 0.9354 in the study. Data were analyzed using SPSS 18.0 program for ANOVA and multiple regression analysis. Results: Fear of dentist care showed significant differences in treatment avoidance factor(p<0.001), stimulus reaction factor (p<0.05), and physiological reaction factor(p<0.001). The factors depended on subjective recognition of health and health-improving activities and differences in treatment avoidance factor(p<0.05) and physiological reaction factor(p<0.01). The dental symptoms factors showed significant differences in health recognition(p<0.001), interest in health(p<0.001), alcohol drinking status(p<0.001) and regular meal(p<0.001). While function limit factors showed differences in health recognition (p<0.001), interest in health(p<0.001), smoking(p<0.001), alcohol drinking(p<0.001) and regular meal(p<0.001). Mental and social stabilities factors showed significant differences in health recognition(p<0.001), interest in health(p<0.001) and alcohol drinking status(p<0.001). Among the factors influencing on the quality of life in dental health, interest in health(p<0.005), alcohol drinking(p<0.005) and physiological reaction in the midst of fear of dentist care(p<0.001) were the significant impact factor. Conclusions: It is necessary to develop a continuous and systematical program of dental health and dental care by experts so that the students can reduce the fear of dentist care by regular dental checkup and preventive treatment and care.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.21-26
• /
• 2009

Purpose: Standards of alloy for porcelain fused to metal crown be classified by metallic factor and biological factor. Metallic factors consist of stability of alloy composition and mechanical strength and surface characteristics for chemical bond. Biological factors be considered properties of metallic elements and problems originated by toxicity and hypersensitive reaction. Alloys considered such controversial points are the most suitable alloy for dental instrument. Method: Alloys added Be and Nb using Ni-Cr alloy which has been widely used for dental instrument be selected and classified experimental group. Non-addition Be and Nb to Ni-Cr alloy classify control group and addition Be alloy is Be-experimental group, addition Nb alloy is Nb-experimental group. Specimens for cytotoxicity analysis gave effect to washing and sterilization. and then made an experiment on elution with cell medium after disinfection. It conducted specimens within cell medium with 24hours, 48hours, 72hours, respectively. It cultured human dermal fibroblast(HDF) using cell medium for cytotoxicity test and then investigated elution rate through spectroscopic analysis by MTT-assay. Result: As results of cytotoxicity test by MTT-assay, cultured cell rate of VII measured more low numerical value within elution medium for 24hours focused on control group. Also, cultured cell rate of K3 alloys observed low value for 48hours, 72hours than value of control group. Conclusion: According to final result that synthesize above results, Ni-Cr alloy added Be and Ni has little difference in Cytotoxicity by MTT-assay.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.2
• /
• pp.269-275
• /
• 2016

Objectives: The purpose of the study is to investigate the influence of self-control on stress management and oral health related quality of life in high school students. Methods: A self-reported questionnaire was completed by 422 high school students in Ulsan from December 1, 2014 to February 20, 2015. The study instrument consisted of stress and self-control. The stress instrument included 17 items modified by Kim and Lee. The self-control instrument was modified by Kim and had 20 items. Pearson's correlation analysis was conducted to analyze the relationship between stress, self-control and oral health related quality of life. Regression analysis was used to analyze the effect of the stress on oral heal related quality of life. Hierarchical regression analysis was done to analyze the control effect of self-control in the relationship between the stress and oral health related quality of life. Results: The higher stress level resulted in the lower oral heal related quality of life. The higher self-control maintained the higher oral health related quality of life. The higher long term pursuit of satisfaction led to higher oral health related quality of life. The immediate suppression of satisfaction had a positive influence on the higher oral health related quality of life. Conclusions: There were significant correlations in self-control on stress management and oral health related quality of life.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.2
• /
• pp.211-220
• /
• 2013

Objectives : This study intended to figure out illegal treatment by unlicensed person in dental area and factors, which were considered as user's position on the basis of the local community investigation of health conditions in chungbuk provinces in 2008. Methods : This study used chi-square test and complex sample design of multi-variate logistic regression analysis to question 12,443 peoples who have experience on illegal dental treatment. Results : Multi-variate logistic regression analysis results showed that factors having related to illegal dental treatment are sex, age, education standards, subjective awareness of oral health condition, drinking experience of lifetime, unmet need of dental treatment, chewing difficulty, use of dentures, experience of scaling and the use of interdental care instrument. Conclusions : As a result of this study, in order to root out illegal dental treatment, we need to expand the breadth of health insurance coverage so that it can reduce the burden of dental expenses. Moreover, we need to set out health service of public oral health to inform the importances of maintaining good oral health and the problems of illegal dental treatment by unlicensed person.

• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.26-33
• /
• 2010

We searched at the "PubMed.gov" and "jendodon.com" sites to conduct a literature review on dental instruments that are reused in clinical settings and on infection control involving pre-disinfection or sterilization cleaning/rinsing. The keyword "dental clean" was used for the Web search. We found the present official definition of instrument cleaning performed prior to disinfection or sterilization rather limiting ("removal of foreign matter (soil, organism, etc.) from the instruments"). Thus, we proposed to expand the definition to include the removal of oils applied to protect the metallic instruments and from corrosion, stains, and rust resulting from the frequent reuse of the instruments. Clinicians are found to clean their dental instruments (a) immediately after treating their patients or (b) following their treatment but not immediately afterward. In the latter case, we recommend presoaking to be added. Ultrasonic sterilization of 5~15 minutes is found to be more effective in terms of eliminating residual matter from the instruments compared to other methods. To check on the cleaning results, we recommend visual inspection, which can be quick and practical in clinical settings. The latest products being developed and marketed on the market address the related problems. Nonetheless, research must be continued on the effects of presoak, cleaning/rinsing, disinfection, and high-temperature or heating-based sterilization on the dental instruments and on dental clinicians' practices in cleaning, disinfection, and sterilization. We advise dental clinicians to select the proper cleaning methods and detergents for their instruments to help eliminate or prevent corrosion, staining, and rusting, to reduce the maintenance costs, and to ensure user-friendly instruments/apparatuses.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.5
• /
• pp.369-377
• /
• 2023

Objectives: The aim of this study was to develop and validate a Korean-adapted version of the job expectations scale for dental hygienists. Methods: To achieve this goal, a comprehensive methodology was employed, including frequency analysis, exploratory factor analysis (maximum likelihood, direct oblimin rotation), confirmatory factor analysis, Cronbach's α reliability, independent t-test, and one-way ANOVA (Duncan post-hoc test) were performed. Results: The Korean version of job expectations scale for dental hygienists comprised 21 items in the personal domain and 5 items in the social domain. The scale demonstrated high construct validity, convergent validity, discriminant validity, and reliability were found. While dental hygienists were found to have higher expectations in the their personal domain than the social domain, expectations in the social domain were higher among male hygienists, those with a bachelor's degree or higher, those in regular permanent employment, and those working in hospital-level or higher facilities. Conclusions: Job expectations is a more comprehensive construct than job roles or professional identity. We anticipate that the instrument will be widely used to analyze trends in job expectations in response to changes in societal values regarding to dental hygienists, the gap between realities and ideals within the dental hygiene profession, and policy considerations.

• Restorative Dentistry and Endodontics
• /
• v.45 no.2
• /
• pp.22.1-22.10
• /
• 2020

Objectives: This study investigated the influence of glide path size and operating kinetics on the time to reach the working length and the fracture resistance of Twisted File (TF) and Endostar E3 files. Materials and Methods: A total of 120 mandibular single-rooted premolars were selected. Two methods of kinetic motion (TF adaptive and continuous rotary motion) and file systems (TF and Endostar E3) were employed. The files were used in root canals prepared to apical glide path sizes of 15, 20, and 25. The time taken to reach the working length and the number of canals used before the instrument deformed or fractured were noted. Fractured instruments were examined with scanning electron microscopy. Results: The TF system took significantly more time to reach the working length than the Endostar E3 system. Both systems required significantly more time to reach the working length at the size 15 glide path than at sizes 20 and 25. A greater number of TFs than Endostar E3 files exhibited deformation, and a higher incidence of instrument deformation was observed in adaptive than in continuous rotary motion; more deformation was also observed with the size 15 glide path. One TF was fractured while undergoing adaptive motion. Conclusions: No significant difference was observed between continuous rotary and adaptive motion. The TF system and adaptive motion were associated with a higher incidence of deformation and fracture. Apical glide path sizes of 20 and 25 required significantly less time to reach the working length than size 15.

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.276-281
• /
• 2014

Objectives: The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. Materials and Methods: The apical 3 mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan) or JT-5B (B&L Biotech Ltd.). The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1), J1 (JT-5B / Power-1), K4 (KIS-1D / Power-4), and J4 (JT-5B / Power-4). The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. Results: There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05). The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Conclusions: Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.3
• /
• pp.379-387
• /
• 2015

Objectives: The purpose of the study is to investigate the influencing factors of retirement expectation on retirement preparation in the dental technicians. Methods: The subjects were 231 dental technicians in Seoul. A self-reported questionnaire was completed from July 1, 2014 to September 30, 2014. The study instrument was adapted from Bae and Jeon. The questionnaire consisted of 42 questions including 6 questions of the general characteristics of the subjects, 2 questions of health status and self-esteem, 20 questions of retirement expectation, and 14 questions of retirement preparation measured by Likert 5 scale. Results: Single, younger aged, and highly educated female tended to have the expectation for the new start of career. The expectation for the rest was higher in single than in the married. The influencing factors of retirement expectation were marital status. Those who were single chose the retirement. Those who had long career preferred the new start. Conclusions: The preparation for the retirement is very important in one's life and it is necessary to provide the concrete method and plan for the dental technicians in the future.