• 대한치과기공학회지
• /
• 제23권1호
• /
• pp.75-83
• /
• 2001

This study was conducted to find antibacterial agent against growth of dental caries bacteria. St. mutans KDJ-50 from various medicinal plants of which safety was indetified. Medicinal plants used in this study was dried and grinded after purchased at Daegu yakryung sijang and Kyungsan jungang sijang. Medicinal plants extracted with 80% ethanol at boiling point for 3 hrs was used as antibacterial agent after freeze dried. This study was conducted to find antibacterial agent against growth of dental caries bacteria. St. mutans KDJ-50 from 32 medicinal plants of which safety was indetified. The result of using paper disc method. Caryophylli Flos. Coptidis Rhizoma. Phellodendri Cortex. Schizamdrae Fructs. Myristicae Semen, Crataegi Fructus and Acori Graminei Rhizoma was selected as antibacterial agent. The result of viable cell counting method. the antibacterial activity of Caryophylli Flos was highest among tested 7 medicinal plants followed by Phellodendri Cortex and Coptidis Rhizoma. The extinction effect of the St. mutans by Caryophylli Flos was shown with the addition of 0.5 (w/v) in the medium. The high antibacterial activity was acquired at high extraction temperature and long extraction temperature. The antibacterial activity of Caryophylli Flos was not effected by the concentration of ethanol.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.15-23
• /
• 2011

Purpose: Thy yttria tetragonal zirconia polycrystalline(Y-TZP) is a good structural ceramic for dental restoration. But it have a problem that delamination of veneering ceramic from the Y-TZP core materials. The problem generally occur at the interface, thus this study was conducted to evaluate the interface of Y-TZP using scanning electron microscopy(SEM). Methods: To investigate this aspect, high-resolution SEM observations were made of polished and etched (HF content gel) cross-sections of the interface area. Dry and moist veneering porcelain powders were built up on the zirconia base. Results: The extent of this surface faceting is dependent upon the moisture content of the porcelain powder and the firing temperature. More moisture and higher final heating temperature accelerates the observed faceting of the Y-TZP grains at the interface to the veneering ceramic. Conclusion: These changes of the Y-TZP grains indicate that destabilization of the tetragonal phase of zirconia occurs at the interface during veneering with ceramic. It may result in a reduction of the stability of the zirconia and interface.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.110-117
• /
• 2012

Dental computer-aided design (CAD) and computer-aided manufacturing (CAM) technology have rapidly progressed over the past 30 years. The technology, which can be used in the dental laboratory, the dental office and the form of production centers, has become more common in recent years. This technology is now applied to inlays, onlays, crowns, fixed partial dentures, removable partial denture frameworks, complete dentures, templates for implant installation, implant abutments, and even maxillofacial prostheses. Dentists and dental technicians, who want to use these techniques, should have certain basic knowledge about that. This article gives an overview of CAD/CAM technologies, histories and how it applies in prosthetic dentistry.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.49-58
• /
• 2004

Two diketones, 1-phenyl-1,2-propanedione(PD) and 2,3-butanedione (BD) were investigated as new visible light photosensitizers for a dental resin composite of bis-GMA in order to improve photopolymerization effect. And the photopolymerization efficiency of mixed photosensitizers, PD-CQ and DA-CQ, was studied. Photopolymerization effect of photosensitizers were compared with that of camphorquinone(CQ), the most widely used photosensitizer. The photopolymerization efficiency of bis-GMA containing the photosensitizer increased with irradiation time. The increase was in the order: BD < CQ < PD. The photopolymerization efficiency of this mixture was not so efficient as CQ or PD.

• 대한치과기공학회지
• /
• 제19권1호
• /
• pp.13-19
• /
• 1997

The purpose of this study was carried out by oberserving to composition of an oxide on the surface of Dental porcelain alloy according to the conditions of its heat treatment and analysing the change composition on its surface. Morphological change of the heat treated dental porcelain alloy have been investigated with SEM and EDX. The result of this study is summarized ad follows. The surface indium concentration of specimens increased as the heat treatment temperature and the oxygen partial pressure increased.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.373-376
• /
• 2021

Tested the flexural strength and maximum load of two types of dental 3 D printed temporary tooth materials of the DLP method. The average flexural strength was 206.98 MPa in the test group and 139.77 MPa in the control group. The average flexural strength of the experimental group was 67.21 MPa higher than that of the control group. In the maximum load experiment, an average of 44.16N in the experimental group and 37.31N in the control group were measured. The average value of 6.85N was higher in the experimental group, and the durability of the artificial tooth restoration was improved.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.9-20
• /
• 2003

Using a nickel-chrome casting alloy called 'Rexillium V' which is also available as base metal alloy for dental ceramic crown, 4 types of mixtures(A, B, C, D) with old and new metal were prepared for cyclic casting. The results of cyclic casting can be outlined as follows: 1. For Vickers hardness after casting, specimen A and D tended to have lower hardness in the course of cyclic casting, while specimen B and C tended to higher hardness. 2. The results of X-ray diffraction analysis showed that major crystal phase contained nickelchrome compounds and carbide. 3. The observation results of SEM photographs after cyclic casting show that there was a significant tendency to have similar structures among experimental groups. 4. The results of EDX analysis after cyclic casting showed that there were little differences in chemical composition between parent metal and base metal alloy. Although industrial nickel-chrome cast alloy did not show any significant change in material properties even through cyclic casting over several times, it is recommended that more there be more in-depth studies on how to detect any potential corrosion, discoloration and toxication of dental ceramic crown implanted in patient's oral cavity.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.237-245
• /
• 2016

Purpose: The purpose of this study is to investigate the analysis blended learning interesting and satisfaction on students majoring in dental techniques. Method: The study subject were 181 students from Gimcheon university. Data for this survey was obtain by self-administration method. This questionnaire consist of $lecture^{\circ}$Øs interesting and satisfaction when using an blended learning in the lecture. SPSS 22.0 was used. Analysis of frequency was used and two sammple t-test was used to identify significantly different blended interesting and sataisfaction within the grade. Multiple regression was used to which interestings affect the satisfaction. Results: First, there were significant differences in the grade among the blended interesting and sataisfaction, while on differences in participation satisfaction(p<0.05). Second, The correlation coefficient is 0.714 between blended interesting and staisfaction, Third, Multiple regression showed that the $lecture^{\circ}$Øs interesting applying blended learning affects the satisfaction(p<0.05). Conclusion: Given the findings of the study, lecture applying blended learning seem to be efficient education programs to improve lecture's interesting & satisfaction.

• 대한치과기공학회지
• /
• 제16권1호
• /
• pp.12-42
• /
• 1994

The study objected to the 36persons out of 55 persons who have registered under the association of the professor of department of Dental Laboratory Technology to grasp contents of May, 1992, and objected to the 74persons out of 100persons who have registered under the association of an a lumni of Department of dental Laboratory Technology, Jisan Junior college to grasp contents about improvement of dental laboratory technology, Jisan Junior College to grasp contents about improvement of the national practical examination in the dental technician of the present day of May, 1994 and its results which we have acquired by this study were as follows : There are lots of opinions who have required the necessities to enforce for a national practical examination in the dental technician. A sense of satisfaction forward the system of a national practical examination in the dental technician appeared as unsatisfaction and it's unsatisfaction decreased from evaluation me operation method, the makes of questions, selection of a markers, distribution of marks of a practical examination. The operation method of a practical examination have appeared the opinions which they wished the present system. A date of operation a practical examination have appeared the opinion of which they preferred late in February. The distribution of marks of a practical examination have appeared the opinions which they wished the present system. The problem of the makes of questions of carving test which derived by an out flow of cast appeared which 52.7 percent(58 persons), lack of objectivity and lack of a standard evaluation appeared which 40 percent(44 persons), and lastly appeared. 5.5 percent(6 persons) with partiality of a questions. The problem of the makes of question of Q-test which derived by lack of a standard evaluation appeared which 44.5 percent(49 persons), lack of objectivity appeared which 39.1 percent(43 persons).

• 한국치위생학회지
• /
• 제16권4호
• /
• pp.507-516
• /
• 2016

Objectives: The purpose of the study is to investigate the awareness and practice of dental unit waterline management in dental hygienist. Methods: A self-reported questionnaire was completed by 377 dental hygienists in Seoul and Gyeonggido from March 2 to April 30, 2015. The data were collected by direct visit and informed consent was received after explanation of the study. The questionnaire consisted of general characteristics of the subjects, awareness of dental waterline, practice of dental waterline, and implementation of dental waterline disinfection. Data were analyzed using SPSS 12.0 program. Results: There was a significant correlation between the dental unit waterline disinfection and the appropriateness of the water used for dental treatment(p<0.01, p<0.001). The handpiece was the most commonly used device before treatment and the majority of the subjects answered that they didn't take water out of ultrasonic scaler and air-water syringe on a daily basis. Conclusions: The majority of the dental hygienists did not know the right understanding and proper practice of dental unit waterline management. To reduce the dental device contamination, the continuing education of waterline management should be done for the dental hygienists.