• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.15-21
• /
• 2003

The liquid phase LPG injection engine is a new technology to make good use of LPG as a clean energy. However, it is difficult to precisely control air/fuel ratio in the system because of variation of fuel composition, change of temperature and flash boiling injection mechanism. This study newly suggests an injector control logic for liquid phase LPG injection systems. This logic compensates a number of effects such as variations of density, stoichiometric air/fuel ratio, injection delay time, injection pressure, release pressure which is formed by flash boiling of fuel at nozzle exit. This logic can precisely control air/fuel ratio with only two parameters of intake air flow rate and injection pressure without considering fuel composition, fuel temperature.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.741-746
• /
• 1986

A novel n-p-n bipolar transistor of which emitter is self-aligned with base contact by polyilicon is developed for using in high speed and high packing density LSI circuits. The emitter of this transistor is separated less than 0.4 \ulcorner with base contact by self-aligh technology, and the emitter feature size is less than 3x5 \ulcorner\ulcorner Because the active region of this transistor is not damaged through all the process, it has excellent electric properties. Using the n-p-n transistors by 3.0\ulcorner design rules, a NTL ring oscillator has 380 ps, a CML ring oscillator has 390ps, and a I\ulcorner ring oscillator has 5.6ns of per-gate minimum propagation delay time.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.428-434
• /
• 2008

The purpose of this study was to compare the microtensile bond strength in Class I cavities associated with different light curing modes of same light energy density. Occlusal enamel was removed to expose a flat dentin surface and twenty box-shaped Class I cavities were prepared in dentin. Single Bond (3M Dental product) was applied and Z 250 was inserted using bulk technique. The composite was light-cured using one of four techniques, pulse delay (PD group), soft-start (SS group), pulse cure (PC group) and standard continuous cure (CC group). The light-curing unit capable of adjusting time and intensity (VIP, Bisco Dental product) was selected and the light energy density for all curing modes was fixed at $16J/cm^2$. After storage for 24 hours, specimens were sectioned into beams with a rectangular cross-sectional area of approximately $1mm^2$ Microtensile bond strength $({\mu}TBS)$ test was per- formed using a univel·sal testing machine (EZ Test, Shimadzu Co.). The results were analyzed using oneway ANOVA and Tukey's test at significance level 0.05. The ${\mu}TBS$ of PD group and SS group was higher than that of PC group and CC group. Within the limitations of this in vitro study, modification of curing modes such as pulse delay and soft start polymerization can improve resin/dentin bond strength in Class I cavities by controlling polymerization velocity of composite resin.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.504-513
• /
• 2013

Communication in delay tolerant networks (DTNs) relies on message transport by mobile nodes, and a correct understanding of the node mobility characteristics is therefore crucial to the design of an efficient DTN routing protocol. However, previous work has mainly focused on uncovering all behaviors of node movement, which is not conducive to accurately detecting the specific movement characteristics of a different node. In this paper, we seek to address this problem based on a consideration of social relationships. We first consider social ties from both static and dynamic perspectives. For a static perspective, in addition to certain accidental events, social relations are considered for a long time granularity and tend to be stable over time. For a dynamic perspective, social relations are analyzed in a relatively short time granularity and are likely to change over time. Based on these perspectives, we adopted different efficient approaches to dividing node pairs into two classes, i.e., familiar and unfamiliar pairs. A threshold approach is used for static social ties whereas a density-based aggregation method is used for dynamic social relationships. Extensive experimental results show that both familiar and unfamiliar node pairs have the same inter-contact time distribution, which closely follows a power-law decay up to a certain point, beyond which it begins to exponentially decay. The results also demonstrate that the inter-contact time distribution of familiar pairs decays faster than that of unfamiliar pairs, whether from a static or dynamic perspective. In addition, we also analyze the reason for the difference between the inter-contact time distributions of both unfamiliar and familiar pairs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.35-40
• /
• 2006

The combustion instability in a model dump combustor with an exhaust nozzle and the possibility of combustion control using a loudspeaker to these instabilities were studied. By changing inlet velocity, combustor length and equivalence ratio, dynamic pressure signals and flame structures were simultaneously taken. Because inlet velocity and combustor length affect the life time of vortex in the dump combustor, the results showed that as the combustor length increased and the inlet velocity decreased, the instability frequency decreased and the maximum power spectral density of the dynamic pressure generally decreased. Also, instability frequency and maximum power spectral density of the dynamic pressure increased with the increment of equivalence ratio. From the data of close-loop control, the optimum time-delay control using a loudspeaker was confirmed to be able to reduce the vortex shedding induced from the mixed acoustic-convective mode combustion instability.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.1
• /
• pp.13-20
• /
• 2006

In this paper, a control method of ozone generator for a tiny deodorizer is proposed, and also a cooling technique is described which is cooling down the flowing air gap into a silent discharger to $2[^{\circ}C]$ to generate ozone of high density and diffusing power. As the digital control system for this method, a double feedback loop is designed which detects the voltage and current of equivalent capacitor of the discharger and compensates for the poor power waveform caused by the noise at high discharging frequency. During the plant modeling of this system, computing time factor is considered as a unique parameter of the power system to improve the respond characteristics with regard to fluctuating load and to replenish the computing time delay of the controller. Through the experiment, sinusoidal input current for discharger can be acquired and all the effectiveness of this accurate control system over unstable ozone discharger are proved.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.61-64
• /
• 2015

The brightness of Io's magnetic footprint, an indicator of electromagnetic interaction at the satellite, appears to be strongly connected to the satellite's distance from the plasma equator. As a result, the brightest footprints were detected when Io is near the interception location between the satellite's orbital plane and the plasma equator. However, volcanic activities on Io show strong correlation with the equatorward shift of Jupiter's main auroral oval, consequently causing the disappearance of Io's footprint. The same conclusion was suggested via the observation of Jupiter's hectometric radio emission, called HOM, which closely corresponds to Jupiter's auroral activity. The plasma environment near the Jovian satellites was found to vary significantly at different observational epochs. The electron density increased by approximately a factor of three from the Voyager epoch (1979) to the Galileo epoch (1995), while the electron density was found to be significantly higher (~ 5 times) in the Cassini epoch (2001). In this current study, the magnetic footprints were clearly brighter ten years ago (from peak brightness in 1998-2001) than the footprints detected in 2007. For volcanic activities on Io in 2007, there are two clear activities in February and late May. The magnetic footprint appeared to be dimmer in March 2007, expected to be the result of volcano activities in Feb 2007. However, the magnetic footprint brightness in June appeared to be slightly brighter than the footprints observed in May. The reason could be the time delay between the brightening of the sodium nebula on approximately May 31st and, a while later, the enhancement of flux tube content peaking on approximately June 5th. On the other hand, Io's magnetic footprints were observed during June 1st - 10th when they may not yet have been affected by the increase in mass outflow due to the increase of plasma density.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.175-184
• /
• 2022

This study was conducted to analyze the effect of dance exercise in Aqua(AZ) and Land(ZG) environments on bone metabolism marker(BMM) and bone mineral density(BMD) and to suggested an effective exercise method to prevent osteoporosis and osteopenia. The subjects of the study were randomly assigned to an aqua zumba group (AZG, n=11), a zumba gold group (ZGG, n=13), and a control group (CG, n=12) for elderly women over 70 years age and 12 weeks, dance exercises were conducted twice time a week for 60 minutes. As a result of this study, OC was AZG(P<.001) and ZGG(P<.05), and IGF-1 was significantly increased in AZG(P<.01). However, there was no significant difference in DPD, BMD, and T-score. Therefore, dance (Zumba) exercise in Aqua and Land has positive effects on BMM and BMD in elderly women, so it is suggested as an effective intervention method to delay osteoporosis and osteopenia.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.38-45
• /
• 2024

Most previous works about magnetic effect on plasma emission were interested in emission enhancement which was useful to various fields of plasma application. On the contrary, the following work is interested in plasma dissipation rarely reported in prior researches and expected to help advance plasma-controlling technique. Nd:YAG laser (1064 nm, 6 ns) was focused on three kinds of metals (Al, Ti and STS) and air. The permanent magnetic field (0.4 T) of Nd₂Fe₁₄B magnet was provided passing throughout laser-induced plasma. The spectra of plasma in both the presence and absence of the magnetic field were observed with varying laser power and delay time of the spectrograph. In this work it was uniquely discovered that the plasma always dissipated easily in the presence of magnetic field irrespective of the laser power. With the O I(777.42 nm)-line shape function fitted to Lorentz profile, its half width at half maximum (HWHM) was evaluated to verify that the magnetic field increased the plasma density. It is concluded that magnetic field facilitates not only plasma emission enhancement but also plasma dissipation, increasing recombination rate which is proportional to plasma density.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.203-208
• /
• 2006

The main research conducted previously on GPS ionosphere in China is first introduced. Besides, the current investigations include as follows: (1) GPS-based spatial environmental, especially the ionosphere, monitoring, modeling and analysis, including ground/space-based GPS ionosphere electron density (IED) through occultation/tomography technologies with GPS data from global/regional network, development of a GNSS-based platform for imaging ionosphere and atmosphere (GPFIIA), and preliminary test results through performing the first 3D imaging for the IED over China, (2) The atmospheric and ionospheric modeling for GPS-based surveying, navigation and orbit determination, involving high precisely ionospheric TEC modeling for phase-based long/median range network RTK system for achieving CM-level real time positioning, next generation GNSS broadcast ionospheric time-delay algorithm required for higher correction accuracy, and orbit determination for Low-Earth-orbiter satellites using single frequency GPS receivers, and (3) Research products in applications for national significant projects: GPS-based ionospheric effects modeling for precise positioning and orbit determination applied to China's manned space-engineering, including spatial robot navigation and control and international space station intersection and docking required for related national significant projects.