• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.121-129
• /
• 2017

In this study, the quality of recycled aggregate for concrete was investigated as the number of recycled aggregate crushing cycles, grinder and crusher, peeling and crushing. First, the quality of density, absorption ratio and solid content was improved as the separation distance decreased and the number of crushing increased, depending on the number of crushing of recycled aggregate and the distance between mantle and cone cave. The quality of density, absorption ratio and solid content was improved as the wire mesh used in striking plate and the number of hammers increased, depending on the type of striking plate and the number of hammers.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.406-410
• /
• 2002

A new spin filter consisting of $50{\mu}m$ (nominal pore size) depth fitters rolled on a stainless steel grid was developed, using Saccharomyces cerevisiae as a model suspension cell to evaluate the spin filter performance. In a 1.8-1 fermentor with a rotation speed of 300 rpm and perfusion rate of 4 ml/min, a cell concentration of 49 g/l and ethanol concentration of 45 g/l from 100 g/l glucose could be obtained in a perfusion culture. The major mechanisms for cell separation used by the large-pore spin filter appeared to be centrifugal force and pivotal movement of the cells in the spin filter.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.717-725
• /
• 1996

We have developed an efficient immobilized cell separator for continuous operation of immobilized fungal cell cultures, and applied this separator to actual fermentation process for the production of cyclosporin A (CyA), a powerful immunosuppressant. In the experiments employing highly viscous polymer (carboxymethyl cellulose) solution, the decantor showed good separating performances at high solution viscosites and fast dilution rates. Air duct and cylindrical separator installed inside the decantor turned out to play key roles for the efficient separation of the immobilized cells. By installing the decantor in an immobilized perfusion reactor system (IPRS), continuous immobilized culture was stably carried out even at high dilution rate for a long period, leading to high productivities of free cells and CyA. Almost no immobilized biomass existed in effuluent stream of the IPRS, demonstrating the effectiveness of the decan- tor system for a long-term continuous fermentation. It was noteworthy that we could obtain these results despite of the unfavorable fermentation conditions, i.e., reduced density of the biosupports caused by overgrowth of cells inside the bead particles and existence of high density of suspended fungal cells (10g/l) in the fermentation broth.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.147-153
• /
• 2014

The centrifugal oil purifier is used in an engine for lubrication and to remove impurities. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. An impure particle in the oil is separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are absorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviors of particles in this centrifugal oil purifier were investigated numerically and the filtration efficiencies was evaluated. For calculations, a commercial code is used and the SST (Shear Stress Transport) turbulence model has been adopted. The MFR (Multi Frames of Reference) method is introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies are evaluated. It has been verified that the filtration efficiency is increased with the increments in the particle size, the particle density and the rotating speed of the cylindrical chamber.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.102-107
• /
• 2006

In this study, the dynamic environment of satellite consists of excessive vibration at low frequency and irregular acceleration transferred by launch vehicle structure. Excessive vibration at low frequency is generally approximated by a sinusoidal wave from 100Hz to 200Hz and primarily used to preliminary design The random vibration is created by structural vibration due to the combustion of launch vehicle, separation stage and external aerodynamic noise. these are transferred to the adapter structure between satellite and launch vehicle through the structure of launch vehicle. random vibration is being specified for acceptance tests, screening tests, and qualification tests, because it has been shown that random vibration more closely represents the true environments in which the electronic equipment must operate.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.230-237
• /
• 1994

Spin-filters are used as cell separation devices for achieving high cell density and high productivity in animal cell culture. We have proposed a model for the cell growth in a spin-filter perfusion culture and examined the effects on cell growth by several parameters including ammonia inhibition, specific growth rate, specific feeding rate, and cell retention. Results from computer simulation and sensitivity analysis indicate that the cell retention affects the cell growth mostly while there is a significant inhibition on cell growth by the ammonia accumulated during the culture. The specific feeding rate has minimal effects on cell growth, which is consistant with the fact that the cell growth with a step feeding is quite similar to that with a continuous feeding.

• Transactions of Materials Processing
• /
• v.33 no.4
• /
• pp.285-290
• /
• 2024

Electropulsing treatment (EPT) has been developed as an alternative to furnace heat treatment (FHT) to exploit its engineering advantages in rapidly annealing metallic materials. Conventionally, the separation of thermal and athermal effects of EPT has been attempted by comparing EPT and FHT specimens processed under identical temperature and duration. However, this method inherently introduces experimental and measurement errors. This study proposes a novel approach to distinguish the thermal and athermal effects of EPT-processed metals using T-shaped specimen with two observation points, namely 'C' and 'D'. For verification, the thermal gradient of T-shaped Mg alloys was examined under various EPT conditions. The points C exhibited higher temperatures compared to those at points D at a given electric current density, because only the former received both thermal and athermal effects. It was confirmed from twelve specimens that the point C at an electric current density of 65 A·mm^-2 and point D at 70 A·mm^-2 exhibited similar temperatures. This developed method is expected to reduce measurement errors in distinguishing thermal and athermal effects, thus providing a deeper understanding of their quantitative contributions in future studies.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.1
• /
• pp.20-29
• /
• 2017

In order to prove the hypothesis that the element of school location planning - the density of development, availability of various private institutes, the location of school, the type of school district, the distance to nearby schools, the existence of communal areas, the pedestrian street, the number of road lanes - affects the increase and decrease of the number of students in the long term, we examined the tendency of the number of long-term (24 years). The results of the analysis are as follows: First, the development factors such as development density, location of school, type of school district, distance from neighboring schools, separation of pedestrians and cars are clearly related. Second, the planning factors such as location of private school and installation of pedestrian-only street seem to be related to each other. Third, the number of road lanes and element of "communal area" is irrelevant. This study is limited to generalization of five new metropolitan cities in the metropolitan area, and it is necessary to further elaborate the analysis factors and evaluation criteria.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2011

Purpose : A new inhomogeneity correction method based on two-point Dixon sequence is proposed to obtain water and fat images at 0.35T, low field magnetic resonance imaging (MRI) system. Materials and Methods : Joint phase-magnitude density function (JPMF) is obtained from the in-phase and out-of-phase images by the two-point Dixon method. The range of the water signal is adjusted from the JPMF, and 3D inhomogeneity map is obtained from the phase of corresponding water volume. The 3D inhomogeneity map is used to correct the inhomogeneity field iteratively. Results : The proposed water-fat imaging method was successfully applied to various organs. The proposed 3D inhomogeneity correction algorithm provides good performances in overall multi-slice images. Conclusion : The proposed water-fat separation method using JPMF is robust to field inhomogeneity. Three dimensional inhomogeneity map and the iterative inhomogeneity correction algorithm improve water and fat imaging substantially.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.45-53
• /
• 2003

Discharging untreated bilge to the ocean is a cause of marine pollution. In general, bilge water contains free and/or emulsified forms of oil. Free form of oil can easily be separated by gravimetric flotation and/or proper filtration processes. However, those simple physicochemical processes could not separate emulsified oil without adding proper chemicals. Electrolytic flotation is one of promising technologies able to fulfill the effluent standard requirement, which is below 15 ppm of oil content. In this research, Electrochemical process consisting of electrochemical flotation basin was studied for the treatment of emulsified oil. In order to estimate, the effectiveness of oil separation equipment influent concentration of oil and HRT(Hydraulic retention time) were considered. Also, lab-scale electrochemical process was designed and operated in the condition of various HRT, current density, and electrode gap. Through the research, following results were obtained. From the experiment of bench scale electrochemical treatment process, it was demonstrated that the emulsified oil was treated effectively and the removal efficiency of emulsified oil from wastewater was increased with HRT and current density.