• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.334-338
• /
• 2017

This research aims at investigating science teachers' perception of the refractive index of materials, and thus achieving proper information transmission and teaching of refractive index. Specifically, we have made questionnaires on what physical factors influence the refractive index of a liquid easily available in secondary schools. It was found that 80.0% of science teachers perceived that the density has the greatest influence on the refractive index, among a variety of factors such as molecular structure, the number of molecules per unit volume, mass of each molecule, and the wavelength of light, to mention just a few. This may be due to the fact that current textbooks deal with the refraction of light based on analogy to a mechanical wave. Such a misunderstanding may lead to confusion and misunderstanding for students.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.19-26
• /
• 1999

Strains degrading and decolorizing acid dyes, Nylosan red E-BL 150%. were isolated from natural system, was named as ARK3. The optimal culture conditions of temperature and pH were $35^\circ{C}$, 7.0, respectively. Growth rate of cells in conditions of aerobic shaking more than standing culture conspicuously increased, and optical density of those to strain ARK3 were found as 1.38 and 0.25 after 42 hrs. Decolorization efficiency in batch culture which used as immobilization media to natural zeolite was 15% after 6 hrs, while suspension culture was 5%, also its of immobilization and suspension culture were 90% and 85% after 48 hrs, respectively. Decolorization efficiency of air-lift bioreactor was more than 90% to a dilution rate of $0.038hr^{-1}$, but that was decreased as 70%, when the dilution rate was $0.05hr^{-1}$. Even though at maximum dilution rate of this study, there was not appeared "wash out" phenomienon of biomass. Decolorization efficiency was 97.7% at a dilution rate of $0.025hr^{-1}$, when influent dye concentration was $100mg/\ell$. But if influent dye concentration increased as $150mg/\ell$, even though MLVSS increased, that of treatment water decreased as 93%. Also, when influent dye concentration increased as $200mg/\ell$ and $300mg/\ell$, decolorization efficiencies of treatment water abruptly decreased as 85% and 63%, respectively. Decolorization efficiency was more than 92% to the limit volumetric loading rate of $3.75mg/\ell\cdot{hr}$hr, without regard to variation of influent dye concentration or hydraulic retention time. if volumetric loading rate was more than $3.80mg/\ell\cdot{hr}$, at same condition, decolorization efficiency was lower decrease of retention time than increase of influent dye concentration.entration.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.3
• /
• pp.408-420
• /
• 2014

Yeast surface-displayed antibody libraries provide an efficient and quantitative screening resource for given antigens, but suffer from typically modest library sizes owing to low yeast transformation efficiency. Yeast mating is an attractive method for overcoming the limit of yeast transformation to construct a large, combinatorial antibody library, but the optimal conditions have not been reported. Here, we report a large synthetic human Fab (antigen binding fragment) yeast surface-displayed library generated by stepwise optimization of yeast mating conditions. We first constructed HC (heavy chain) and LC (light chain) libraries, where all of the six CDRs (complementarity-determining regions) of the variable domains were diversified mimicking the human germline antibody repertoires by degenerate codons, onto single frameworks of VH3-23 and $V{\kappa}1$-16 germline sequences, in two haploid cells of opposite mating types. Yeast mating conditions were optimized in the order of cell density, media pH, and cell growth phase, yielding a mating efficiency of ~58% between the two haploid cells carrying HC and LC libraries. We constructed two combinatorial Fab libraries with CDR-H3 of 9 or 11 residues in length with colony diversities of more than $10^9$ by one round of yeast mating between the two haploid HC and LC libraries, with modest diversity sizes of ${\sim}10^7$. The synthetic human Fab yeast-displayed libraries exhibited relative amino acid compositions in each position of the six CDRs that were very similar to those of the designed repertoires, suggesting that they are a promising source for human Fab antibody screening.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.162-162
• /
• 2000

We have studied magnetic properties of Co/Pt multilayered films which have attracted great interest as high-density magneto-optical (MO) recording media due to their good MO properties. For this study, [Pt(45 )/Co(35 )]$\times$8 films were deposited with a Pt buffer layer of 60 on Si(100) substrate by alternating electron-beam evaporation in a high vacuum and were ion beam mixed by using 80keV Ar+ at 25$0^{\circ}C$. Especially, an external magnetic field was added to help changing magnetic property during ion beam mixing (IBM). The intermixing of Co and Pt layers after IBM was confirmed with Rutherford Backscattering Spectroscopy (RBS) and Transmission Electron Microscopy (TEM). The MO property of the film was measured with magneto-optical Kerr spectrometer and the change of magnetic easy axis in the film plane was observed from Ker loop data. This anomalous result might be correlated with the change of atomic structure due to the intermixing effect.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.110-118
• /
• 2016

We compared germination efficiency for somatic embryos (SE) of Liriodendron tulipifera using semi-solid (SS), temporary immersion bioreactors (TIB), and continuous immersion bioreactors (CIB) to produce vigorous plants. The bioreactors were designed to be immersed in liquid media with plantlets with an adjustable immersion time. TIB and CIB improved germination rates up to 80.86% and 95.21%, respectively, however, CIB produced more hyperhydric plantlets than TIB. The height of plantlets in TIB was significantly higher than for those in CIB. Fresh weights of plantlets grown in CIB of were significantly lower than for those grown in TIB. The lowest chlorophyll concentration was found in in vitro plantlets from CIB. We examined abnormally developed leaves, stems, and apical zones of in vitro plantlets that were produced in CIB. Among the three types, SS showed the highest stomatal density and the shortest stomatal length in in vitro plantlets. After acclimatization, plants from CIB exhibited the lowest values in biomass, such as height, root collar diameter, leaf fresh weight, leaf length, leaf width, petiole length, petiole diameter, and leaf area. Photosynthesis and transpiration rates of ex vitro plants were not significantly different among the three culture types, but stomatal conductance was higher in TIB than in the SS and CIB. Therefore, the results suggest that TIB is the preferable bioreactor to improve in vitro plantlet regeneration of L. tulipifera. TIB-originated plants showed higher growth rate than SS and CIB after transferring to soil.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.1-6
• /
• 2008

Block copolymers spontaneously assemble into various nanoscale structures such as spheres, cylinders, and lamellar structures according to the relative volumn ratio of each macromolecular block and their overall molecular weights. The self-assembled structures of block copolymer have been extensively investigated for the applications such as nanocomposites, photonic crystals, nanowires, magnetic-storage media, flash memory devices. However, the naturally formed nanostructures of block copolymers contain a high density of defects such that the practical applications for nanoscale devices have been limited. For the practical application of block copolymer nanostructures, a robust process to direct the assembly of block copolymers in thin film geometry is required to be established. To exploit self-assembly of block copolymer for the nanotechnology, it is indispensible to fabricate defect-free self-assembled nanostructure over an arbitrarily large area.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.3-10
• /
• 2016

In this paper, two reconstructed point cloud sets with the information of 3D features are analyzed. For a certain 3D reconstruction of the interior of a building, the first image set is taken from the sequential passive camera movement along the regular grid path and the second set is from the application of the laser scanning process. Matched key points over all images are obtained by the SIFT(Scale Invariant Feature Transformation) algorithm and are used for the registration of the point cloud data. The obtained results are point cloud number, average density of point cloud and the generating time for point cloud. Experimental results show the necessity of images from the additional sensors as well as the images from the camera for the more accurate 3D reconstruction of the interior of a building.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.395-402
• /
• 2015

The suspension plasma spray (SPS) technique has been used to obtain dense $Y_2O_3$ coatings and to overcome the drawbacks of the conventional air plasma spray (APS). SPS uses suspensions containing micrometer or sub-micrometer sized powders dispersed in liquid media. In this study, microstructure developments and mechanical properties have been investigated as functions of particle size of source material and plasma processing parameters such as plasma power and stand-off distance. The microstructure of the coating was found to be highly related to the particle size and the plasma processing parameters, and it was directly reflected in the hardness and the adhesion strength. When fine powder (BET $16.4m^2/g$) was used as a raw material in the suspension, there was, with increasing stand-off distance, a change from a dense structure with a slightly bumpy surface to a porous structure with a cauliflower-like surface. On the other hand, when a coarse powder (BET $2.8m^2/g$) was used, the coating density was lower, with microscopic splats on the surface. Using fine $Y_2O_3$ powders, the coating layer with an optimum short stand-off distance showed a high hardness of approximately 90% of that of sintered $Y_2O_3$ and an adhesion strength several times higher than that of the coating by conventional APS.

• Journal of Mushroom
• /
• v.5 no.2
• /
• pp.81-85
• /
• 2007

This study was carried out to investigate the conditions of liquid culture and fruiting body formation of Cordyceps militaris using grain mediacontained the brown rice and black purple rice. Liquid mycelial growth and density of Cordyceps militaris were the highest in the medium of malt extract 0.7% and pH 5.0~5.5. The optimal condition of formation the fruiting bodies were shown to be temperature of $17^{\circ}C$, light intensity of 600 lux, $C0_2$ of 500ppm and humidity intensity of 95% produced highest amount of fruit bodies.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.2
• /
• pp.149-157
• /
• 2002

Objectives: To assess the scavenging effect of carnitine derivatives on oxidative damage to sperm during sperm processing, cryopreservation and thawing. Materials and Methods: Fresh semen samples from 20 normal healthy volunteers were collected by masturbation after at least 48 hours abstinence. After liquefaction of semen samples at room temperature, the specimens were diluted with sperm wash media (Ham's F-10, Life technologics) to a uniform density of $20{\times}10^6/ml$. L-carnitine or acetylcarnitine were added with various concentration of $0{\mu}M$, $10{\mu}M$, $30{\mu}M$ in semen sample or cryoprotectant. All specimens were cryopreservated at $-196^{circ}C$ $LN_2$ for 3 days. Sperm motility, vitality, fertilizing capacity, reactive oxygen species formation and the level of lipid peroxidation were analyzed by computer assisted semen analyzer, eosin-nigrosin stain, hypoosmotic swelling test, chemiluminescence and thiobarbituric acid method, respectively, during sperm processing, cryopreservation and thawing. Results: The sperm motility was only increased in proportion to the concentration of acetylcarnitine with no statistical significance (p>0.05). The sperm vitality was also significantly improved in proportion to the concentration of acetylcarnitine with statistical significance (p<0.05). The sperm fertilizing capacity was significantly increased in proportion to the concentration of L-carnitine and acetylcarnitine and reactive oxygen species generation and lipid peroxidation were significantly decreased with same fashion (p<0.05). On comparison of effects between L-carnitine and acetylcarnitine, acetylcarnitine was superior to L-carnitine on the improvement of sperm motility and vitality as well as the suppression of reactive oxygen species generation and lipid peroxidation. Conclusions: These results suggest that carnitine derivatives have a scavenging effect against oxidative damages during sperm processing, cryopreservation and thawing. Therefore, carnitine derivatives may be useful as an oral antioxidant in patients with male infertility due to increased ROS generation.