• Plant Resources
• /
• v.2 no.1
• /
• pp.42-48
• /
• 1999

This study was undertaken to examine the feasibility of black locust (Robinia pseudoacacia) as substrates for several edible mushrooms. For the cultivation of several edible and/or medicinal fungi on black locust, optimum bulk densities, synthetic or semisynthetic additives, natural additives and pretreatment methods were investigated. Fruit body yields of the fungi on various sawdust media composed of different wood species were also analyzed for testing the capability of black locust as a substrate for mushroom production. Mycelial growths decreased proportional when the bulk density increased. The most suitable carbon and nitrogen sources as additives to promote the mycelial growth were sucrose (2%, w/w) and ammonium phosphate (0.2%, w/w) respectively. When corn-powder and beer-waste as natural additives were added to sawdust of black locust showed the significant growth of mycelia. And the optimum mixing ratio was 10:2:1 (sawdust: corn-powder: beer-waste, w/w). Black locust after cold water treatment showed the outstanding mycelial growths. Any significant changes of pH, moisture content (%) and dry-weight losses (%) could not be found among culture substrates (sawdust of black locust, oak and poplar wood) examined before and after harvesting of fruit bodies. Yield of fruit bodies on black locust culture media were comparable with those culture media composed with oak and poplar wood. The present work indicated strongly the potentiality of black locust as raw materials for edible and medicinal mushrooms.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.1
• /
• pp.43-50
• /
• 2010

The 200mesh screen was tensioned and fixed on a frame. When applied tension to 5N and 10N per unit area, a side length of opening of the screen was 163.223${\mu}m$ and 168.224${\mu}m$, respective. But side length not tensioned was 158.879${\mu}m$. We knew that a side length of opening of the screen rarely changes with tension applied to the screen. The appearances that a side length of opening of the screen expand little are due to a decreasing diameter of thread by means of tension. In a thickness measurement of screen, While the high density mesh screen that had a lot of knots that crossed a line of latitude and longitude per unit area appeared a higher numerical value, the low density mesh screen that had a few knots appeared a low numerical value.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.95-104
• /
• 1997

The objectives of this study are to investigate the effect of media on the removal efficiency of nitrate-nitrogen and the biofilm thickness in the fluidized bed biofilm reactor(FBBR) used for the high rate denitrification of nitric acid wastewater. Granular activated carbon(GAC) of 1.274 mm diameter and sand of 0.455 mm diameter were used as the media in the FBBR of 0.05 m diameter and 1.5 m height. As the nitrate-nitrogen concentration of the influent was increased stepwise from 600 to 4800 mg/l, the nitrate- and nitrite-nitrogen concentration of the effluent, biofilm thickness and biofilm dry density were measured to study the effects of media on the denitrification efficiency. The biofilm thickness increased with the substrate loading rate, and the biofilm dry density decreased with the increase of the biofilm thickness. At the influent nitrate-nitrogen concentration of 2400 mg/l, the removal efficiency in the FBBR with GAC was 88%, while that in the FBBR with sand was 99.6%. The biofilm in the FBBR with GAC was so thick, 754.9 $\mu$m, as to increase the mass transfer resistance, compared to that, 143.7 $\mu$m, in the FBBR with sand. The maximum specific denitrification rate in the FBBR with GAC was 15.0 kg-N/m$^3\cdot$ day, while that in the FBBR with sand was 18.0 kg-N/m$^3\cdot$ day. The biomass concentration in the FBBR with sand exhibited the high value 37 kg/m$^3$.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.33-40
• /
• 2016

Liquid fuel can be easily exploded and release more energy of detonation than conventional explosives because it has different explosion mechanism. In order to analyze dispersion characteristics of liquid fuel for the safety purpose, two tests are conducted. First, pre-test, which is a computer simulation, is carried out by a software called ANSYS AUTODYN to eliminate the effect of a canister that usually causes irregular dispersion of the fuel. Second, field test is performed to find out the amount and density effect of bursting charge. High speed cameras are installed in front of the canister to visualize the mechanism. Velocity, area and radius of the dispersed cloud are measured by image processing software, these are shown that the amount of bursting charge affects cloud velocity and area but density is not a significant factor of cloud formation.

• Journal of radiological science and technology
• /
• v.24 no.1
• /
• pp.43-48
• /
• 2001

This study deals with the relationship between the magnitude of ultrasonic nonlinear parameter B/A, and sound speed of amount of fat present in biological media to measure B/A system using a wide band ultrasonic transducer. To represent this case, mixtures of egg whites and egg yolk were studied. Even though the differences in density and sound speed of the two egg components were in the range of 1%, B/A increase parabolically as a function of the fat density, which is not in agreement with the Yoshizumi et al's suggestion. In skim milk that does not contain fat, both the B/A and the sound speed increase with the solubility. It is considered that protein could affect these values.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.4 no.1
• /
• pp.21-25
• /
• 1999

Two low-salt complex media, bactopeptone and desalted yeast extract, were used for high density cultivation of the hyperthermophilic archaeon Sulfolobus solfataricus (DSM 1617). Bactopeptone, which has low mineral ion content among various complex media, was good for cell growth in batch cultures; the maximal cell density in bactopeptone was comparable to that in yeast extract. However, cell growth was rather poor when bactopeptone was added by the fed-batch procedure. Since several vitamins are deficient in abctopeptone, the effect of vitamins on cell growth was examined. Among the vitamins tested, pyridoxine was found to improve the growth rate of S. solfataricus. To reduce the growth inhibition caused by mineral ions, yeast extract was dialyzed against distilled water and then fed-batch cultures were carried out using a fed medium containing desalted yeast extract. Although the concentrations of mineral ions in yeast extract were significantly lowered by the dialysis whether low molecular weight solutes in yest extract are crucial for cell growth, we investigated the effect of trehalose, a most abundant compatible solute in yeast extract, on the growth pattern. Cell densities were increased and the length of the lag phase was markedly shortened by the presence of trehalose, indicating that trehalose plays an important role in the growth of S. solfataricus.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.65-70
• /
• 2006

In the information storage development, the trend of the storage device is to increase the recording density. Among such an effort, near-field probe recording is spotlighted as a method of high increasing recording density. For the successfully embodiment of storage device, the actuating mechanism of near-field probe is essentially designed. In this paper, we suggest the slider similar with conventional HDD and design the slider using near-field probe for the purpose of applying the slider in order to control gap between probe and media. The most important object of slider design is to guarantee the flying ability and stability. For achievement of these design objects, we perform two step of optimal design process. The media is supposed to model as random displacement, which is only considered roughness of disk surface. The design slider is analyzed with dynamic state in assumed media. At this process, the optimal model is confirmed to stable flying stability.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.178-179
• /
• 2002

CoCrPt alloy films are one of the most promising candidates for high-density perpendicular magnetic recording media due to their strong perpendicular magnetic anisotropy (PMA) and high coercivity [1]. In order to achieve high-density magnetic recording media, it is essential to characterize the magnetoelastic properties since experimental and theoretical research has revealed a significant magnetoelastic contribution to the magnetic properties in magnetic thin films. (omitted)

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.31-44
• /
• 2010

Ever since the introduction of offset lithography, an operator have looked for ways to improve the process by reducing need for dampening solution. Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for lithography printing must work with dampening solution. The dampening solution may cause the emulsification of ink by the printing pressure in the printing nip. Emulsified ink changed viscosity, tack and causes problems such as bad transfer, uniform density and printed mottle. For a high quality web printing, we studied the effect of emulsified heat-set web inks on the printability, such as amount of ink transfer, printed density and uniformity. For this study, we were carried out by using IGT printability tester C1. For determination of ink properties using the spread meter and Thwing Albert Ink-o-meter, and using the densitometer and image analysis for printed quality determination. The experimental results of this study, we look forward to can be used as the basis for improve of the web print quality.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2010.06a
• /
• pp.70-71
• /
• 2010

In this study, We fabricated FePt-based perpendicular patterned media using a selective combination of E-beam lithography and either Ar plasma etching (deposition-first process) or FePt lift-off (deposition-last process). We employed the deposition-last process to avoid chemical and structural disordering by impinging Ar ions (deposition-first process). For a patterned medium with 100 nm patterns made by this process, the out-of-plane coercivity was measured to be 5 fold larger than its in-plane value. The deposition-last process may be a promising way to achieve ultra-high density patterned media.